Page History
...
- TE0808 - UltraSoM+ - Wiki with TRM, reference projects, application notes and more
- TE0808 Resources - Links to all TE0808 Resources
- TEBF0808 - Wiki with TRM, application notes and more
- TEBF0808 Resources - Links to all TEBF0808 Resources
- TE0790 - XMOD - Wiki with TRM, application notes and more
- TE0790 Resources - Links to all TE0790 Resources
- Vivado/SDK/SDSoC - Short instructions for Vivado, SDK, SDSoC
- Project Delivery - General descriptions of reference designs and content
Download Links
- TE0808 Download Area - contains various reference designs, schematics, hardware designs, 3D models and more
- TEBF0808 Download Area - contains schematics, hardware designs, 3D models and more
- TE0790-XMOD Download Area - contains firmware with projects, schematics, hardware designs, 3D models and more
- TE Master Pinout - Excel Sheet as Pinout-Viewer and XDC-Generator
Shop Links
- Shop TE0808-Starter-Kit - contains prices, order number, content...
...
LED description(need CPLD Firmware REV06 or newer):
BLUE Power LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
Power | ******** (slow blink) | Indicate board is powered off. |
RGPIO controlled | User Defined | RGPIO 14 and 15, if RGPIO is active. |
MIO40 | User Defined | MIO40, if RGPIO is deactivated |
Main Power Switch is ON and Power Button is pressed first time
...
LED description (need CPLD Firmware REV06 or newer):
BLUE Power LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
Power | ******** (slow blink) | Indicate board is powered off. |
RGPIO controlled | User Defined | RGPIO 14 and 15, if RGPIO is active. |
MIO40 | User Defined | MIO40, if RGPIO is deactivated |
Red HD LED on enclosure | ||
---|---|---|
Status/ User | Blink Sequence | Comment |
PS_INIT_B | ******** | Indicates the PS is not initialized after a power-on reset (POR). |
PS_ERROR_OUT | *****ooo | The PS_ERROR_OUT signal is asserted for accidental loss of power, an error, or an exception in the PMU. |
ERR_STAT | ****oooo | The PS_ERROR_STATUS indicates a secure lockdown state. Alternatively, it can be used by the PMU firmware to indicate system status. |
RGPIO controlled | User Defined | RGPIO 16 and 17, if RGPIO is active |
SC0 | User Defined | SC0 (PL IO), if RGPIO is deactivated |
Notes
Most LEDs are CPLD Firmware dependents, see TEBF0808 Master CPLD and TEBF0808 Slave CPLD
...
Overview
Content Tools