Page History
...
| Board Variant | Xilinx Zynq SoC | DDR3L SDRAM | ARM Cores | PL Cells | LUTs | Flip-Flops | Block RAM | DSP Slices | Zynq SoC Operating Temp. | Temp. Range |
|---|---|---|---|---|---|---|---|---|---|---|
| TE0723-02 | XC7Z010-1CLG225C | 128 MBytes | Dual-core | 28K | 17,6K | 35,2K | 2.1 MBytes | 80 | 0°C to +85°C | Commercial |
| TE0723-03M | XC7Z010-1CLG225C | 512 MBytes | Dual-core | 28K | 17,6K | 35,2K | 2.1 MBytes | 80 | 0°C to +85°C | Commercial |
| TE0723-03-07S-1C | XC7Z007S-1CLG225C | 512 MBytes | Single-core | 23K | 14,4K | 28,8K | 1.8 MBytes | 66 | 0°C to +85°C | Commercial |
Table 21: Board variants
Technical Specifications
Absolute Maximum
...
Rating
Parameter | Min | Max | Units | Reference Document |
|---|
VIN supply voltage
V
Storage temperature
-40
+85
°C
Table 22: Board absolute maximum ratings.
Recommended Operating Conditions
5V power supply voltage | 4.75 | 5.25 | V | USB2.0 VBUS voltage specification |
| HR PL I/O banks input voltage (VCCIO single ended) | -0.4 | VCCO + 0.55 | V | Xilinx datasheet DS187 (VCCO 3.3V nominal) |
| PS MIO I/O banks input voltage (VCCIO single ended) | -0.4 | VCCO + 0.55 | V | Xilinx datasheet DS187 (VCCO 3.3V nominal) |
| Analog Multiplexer IC pins input voltage | 0 | 3.3V | V | TI CDx4HC405x data sheet |
Storage temperature | -40 | +85 | °C | WL-SMCW SMD LED data sheet |
Table 22: Board absolute maximum ratings
Recommended Operating Conditions
| Parameter | Min | Max | Units | Reference Document |
|---|---|---|---|---|
| 5V power supply voltage | 4.75 | 5.25 | V | USB2.0 VBUS voltage specification |
| HR PL I/O banks input voltage (VCCIO single ended) | -0.20 | VCCO + 0.20 | V | Xilinx datasheet DS187 (VCCO 3.3V nominal) |
| PS MIO I/O banks input voltage (VCCIO single ended) | -0.20 | VCCO + 0.20 | V | Xilinx datasheet DS187 (VCCO 3.3V nominal) |
| Analog Multiplexer IC pins input voltage | 0 | 3.3V | V | TI CDx4HC405x data sheet |
Operating Temperature Commercial | 0 | +85 | °C | Xilinx datasheet DS190 |
Table 23: Board recommended operating conditions
...
| Note |
|---|
| Please check Xilinx datasheet DS187 for complete list of absolute maximum and recommended operating ratings for the Zynq-7 device. |
...
Please note that two different units are used on the figures below, SI system millimeters (mm) and imperial system thousandths of an inch(mil). To convert mils to millimeters and vice versa use formula 100mil's = 2,54mm.
Figure 5: Board physical dimensions
...
| Date | Revision | Notes | PCN | Documentation Link |
|---|---|---|---|---|
| 2016-07-15 | 03 | Refer to Changes list in Schematic for further details in changes to REV02 | - | TE0723-03 |
2015-11-06 | 02 | Second Production Release | - | TE0723-02 |
| - | 01 | First Production Release | - | - |
...
Overview
Content Tools