Page History

...

...

...

TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI.  For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality 

1. _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
   
2. Press 0 and enter for minimum setup
3. (optional Win OS) Generate Virtual Drive or use short directory  for the reference design (for example x:\<design name>)
4. Create Project
   
   1. Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
      Note: Select correct one, see TE Board Part Files
      Important: Use Board Part Files, which did not ends with *_tebf0808
5. Create HDF and export to prebuilt folder
   
   1. Run on Vivado TCL: TE::hw_build_design -export_prebuilt
      Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
6. Generate Programming Files with HSI/SDK
   
   1. Run on Vivado TCL: TE::sw_run_hsi
      Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv"
   2. (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
      Note: See SDK Projects

...

1. Prepare HW like described on section Programming 46039162
2. Connect UART USB (most cases same as JTAG)
3. Select QSPI Card as Boot Mode
   Note: See TRM of the Carrier, which is used.
4. Power On PCB
   Note: 1. ZynqMP Boot ROM loads PMU Firmware and  FSBL from QSPI into OCM, 2. FSBL loads Application into DDR

...

Legal Notices