Page History
...
HTML |
---|
<!-- Download Link: Go to Base Folder of the Module or Carrier, for example : https://shop.trenz-electronic.de/en/Download/?path=Trenz_Electronic/TE0712 Use english URL "../en/.. --> |
Scroll Ignore |
---|
Scroll pdf ignore | |
---|---|
Table of Contents
|
Overview
HTML |
---|
<!--
Wiki Link: Go to Base Folder of the Module or Carrier, for example : https://wiki.trenz-electronic.de/display/PD/TE0706
--> |
Scroll Only (inline) |
---|
Refer to https://wiki.trenz-electronic.de/display/PD/TE0706+TRM for the current online version of this manual and other available documentation.
|
The Trenz Electronic TE0706 Carrier Board provides functionalities for testing, evaluation and development purposes of company's 4 x 5 cm SoMs. The Carrier Board is equipped with various components and connectors for different configuration setups and needs. The interfaces of the SoM's functional units and PL I/O-banks are connected via board-to-board connectors to the Carrier Board's components and connectors for easy user access.
See "4 x 5 SoM Carriers" page for more information about supported 4 x 5 cm SoMs.
Scroll Only (inline) |
---|
Refer to http://trenz.org/te0706-info for the current online version of this manual and other available documentation.
|
Key Features
- 3 x Samtec LSHM Series Board to Board Connectors
- VG96 connector (mounting holes and solder pads, J6) and 50-pin IDC male connector socket (J5) for access to PL I/O-bank pins
- Micro SD card socket
- SDIO port expander with voltage-level translation
- USB2.0 type A connector, optionally Micro USB 2.0 connector
- 1 x user-push button S2, by default configured as system reset button
- 1 x RJ45 GbE MagJack J3, connected via MDI to B2B connector JB1
- 1 x Marvell Alaska 88E1512 GbE PHY, providing Ethernet interface in conjunction with RJ45 GbE MagJack J2
- 5V power supply barrel jack
- 4 A High-Efficiency Power SoC DC-DC Step-Down Converter (Enpirion EN6347) for 3.3V power supply
- XMOD JTAG- / UART-header JX1
- DIP-switch S1 to set Som's System Controller CPLD control signals
- 3 x VCCIO selection jumper J10, J11 and J12 to set SoM's PL I/O-bank voltages
...
Overview
Content Tools