Page History
...
Programming and testing is also possible with a LPC FMC host. Albeit due to the restrictions of the LPC connector only the first SFP can be used and the (currently unused) clock input from the host (CLK2) is not available.
Overview
The FMC card violates the standard in region 2, where the quad SFP cage resides. Check carfully if your carrier is compatible with the physical dimension of the TEF0008 FMC.
Overview
JTAG/UART
JTAG is available on the FMC connector, via the optional pin header J3, or testpoints.
...
The functionality of the status LED is system controller software dependent, and described in the Firmeware. The original shiped firmeware sets the status LED on if at least on SFP is connected.
Notes
- link to TEF0008 Rescources
...
Overview
Content Tools