Page History
...
Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||
|
Number | Note | Letter | Note | |
---|---|---|---|---|
1 | S2- Reset Button S2 | A | P1 - PMOD 3.3V I2C Bus | |
2 | LEDs D7 - LED D7 Red (Usage: status) and || D6 - LED Green (Usage: status) | B | J9 - Audio Enclosure | |
3 | S1 - Reset Button S1 | C | P3 - PMOD 3.3V I2C Bus | |
4 | J25 - Power Jack J25, 2.1mm (optional 12V power input) | D | J17 - I2C (for optional module PLL access) | |
5 | S5 - DIP Switch for Boot Mode and FMCVADJ | E | J6/15 - Firefly - GTH | |
6 | J10 - Enclosure Pin header(Reset and Power Button, HD LED (Usage: status/user) and Power LED (Usage: status/user)) | F | J31 - SATA | |
7 | S4 - DIP Switch for CPLD access and power control | G | J21/22 - Firefly - loopback only | |
8 | J12 - XMOD J12 with green dot for Module JTAG and UART, XMOD LED D4 Red used for status information | H | J11 - PCIe (1x) | |
9 | J28 - XMOD J28 for CPLD,FMC JTAG and Firmware ID over UART(need CPLD Firmware 7 or newer) , XMOD LED D4 Red used for status information | I | J30 - PJTAG | |
10 | FPGA Done LED (location varies slightly depending on different module series ) | J | J5 - FMC HPC | |
11 | J20 - ATX Power Connector J20 (Main 12V and 5V Power supply), recommended power supply connector | K | J24 - CAN | |
12 | D1 - SFP LED D1 Red (Usage: status/user) | L | J8 - USB 3.0 (2x) Enclosure | |
13 | D8 - SFP LED D8 Green (Usage: status/user) | M | J27 - SD | |
14 | D9 - SFP LED D9 Red (Usage: status/user) | N | J14 - SFP (2x) | |
15 | D10 - SFP LED D10 Green (Usage: status/user) | O | J7 - USB 3.0 (2x), ETH (1x) | |
16 | J7 - ETH LED Yellow (Usage: status) | P | J13 - Displayport (1x) | |
17 | J7 - ETH LED Green/Orange (Usage: status) | Q | P2 - PMOD 3.3V FPG IOs || Bottom side: J16 - microSD | |
18 | LEDs D4 - LED Green (Usage: status/user) and || D5 - LED Red (Usage: status/user) |
Power supply
...
Overview
Content Tools