...
| Scroll Title |
|---|
| anchor | Table_SIP_GIOs |
|---|
| title | General I/Os to Pin Headers and connectors information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| FPGA Bank | Connector Designator | I/O Signal Count | Voltage Level | Notes |
|---|
| Bank 1A | J1 | 7 | 3.3V | AIN0...6 | | Bank 1B | J4 | 5 | 3.3V | JTAG interface | | Bank 2 | J1 | 4 | 3.3V | DIO2...5 | | Bank 5 | J2 | 9 | 3.3V | DIO6...14 | | J1 | 2 | 3.3V | DIO0...1 | | Bank 8 | J2 | 1 | 3.3V | RESET |
|
...
FPGA I/O Banks
| Page properties |
|---|
|
you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic. Example: | MIO Pin | Connected to | B2B | Notes |
|---|
| MIO12...14 | SPI_CS , SPI_DQ0... SPI_DQ3 SPI_SCK | J2 | QSPI |
|
JTAG access to the TEI0015 SoM through pin header connector J4.
| Scroll Title |
|---|
| anchor | Table_SIPOBP_JTGIOs |
|---|
| title | JTAG pins connectionFPGA I/O Banks |
|---|
|
| Page properties |
|---|
hidden| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
JTAG Signal | Pin Header Connector |
|---|
| TMS | J4-6 |
| TDI | J4-5 |
| TDO | J4-4 |
| TCK | J4-3 |
| JTAG_EN | J4-2 |
FPGA I/O Banks
|
| id | Comments |
|---|
you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic.
Example:
| MIO Pin | Connected to | B2B | Notes |
|---|
| MIO12...14 | SPI_CS , SPI_DQ0... SPI_DQ3 SPI_SCK | J2 | QSPI |
| Scroll Title |
|---|
| anchor | Table_OBP_IOs |
|---|
| title | FPGA I/O Banks |
|---|
|
| FPGA Bank | I/O Signal Count | Connected to | Notes |
|---|
| Bank 1A | 7 | 1x14 Pin header, J1 | AIN0...6 | | 1 | Jumper, J3 | AIN7 | | Bank 1B | 5 | 1x6 Pin header, J4 | JTAG_EN, TDI, TDO, TMS, TCK | | Bank 2 | 4 | 1x14 Pin header, J1 | D2...5 |
| 5 | A2D, U15 | ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV |
| 1 | 12MHz Oscillator, U7 | CLK12M |
| 2 | Amplifier, U12 | nIAMP_A0, nIAMP_A1 | | Bank 3 | 22 | SDRAM, U2 | RAM_ADDR_CMD | | Bank 5 | 9 | 1x14 Pin header, J2 | DIO6...14 | | 2 |
| Scroll Table Layout |
|---|
|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
style | widths | | sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
| FPGA Bank | I/O Signal Count | Connected to | Notes |
|---|
| Bank 1A | 7 | 1x14 Pin header, J1 | AIN0DIO0... | 61 |
| 1 | Jumper, J3 | AIN7 |
| Bank 1B | 5 | 1x6 Pin header, J4 | JTAG_EN, TDI, TDO, TMS, TCK |
| Bank 2 | 4 | 1x14 Pin header, J1 | D2...5 |
5 | A2D, U15 | ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV | 1 | 12MHz Oscillator, U7 | CLK12M | 2 | Amplifier, U12 | nIAMP_A0, nIAMP_A1 | | Bank 3 | 22 | SDRAM, U2 | RAM_ADDR_CMD |
| Bank 5 | 9 | 1x14 Pin header, J2 | DIO6...14 |
| 2 | 1x14 Pin header, J1 | DIO0...1 |
| 1 | D12_R | DIO12 |
| Bank 6 | 16 | SDRAM, U2 | DQ0...15 |
| 2 | SDRAM, U2 | DQM0...1 |
| 1 | D11_R | DIO11 |
| Bank 8 | 8 | User Red LEDs, D2...9 | LED0...7 |
6 | SPI Flash, U5 | F_CS, F_CK, F_DI, F_DO, nSTATUS, DEVCLRn | 1 | Red LED, D10 | CONF_DONE | 6 | FTDI JTAG/UART Adapter, U3 | BDBUS0...5 | 1 | Push Button, S2 | USER_BTN| D12_R | DIO12 |
| Bank 6 | 16 | SDRAM, U2 | DQ0...15 |
| 2 | SDRAM, U2 | DQM0...1 |
| 1 | D11_R | DIO11 |
| Bank 8 | 8 | User Red LEDs, D2...9 | LED0...7 |
| 6 | SPI Flash, U5 | F_CS, F_CK, F_DI, F_DO, nSTATUS, DEVCLRn |
| 1 | Red LED, D10 | CONF_DONE |
| 6 | FTDI JTAG/UART Adapter, U3 | BDBUS0...5 |
| 1 | Push Button, S2 | USER_BTN |
JTAG Interface
JTAG access to the TEI0015 SoM through pin header connector J4.
| Scroll Title |
|---|
| anchor | Table_SIP_JTG |
|---|
| title | JTAG pins connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
JTAG Signal | Pin Header Connector |
|---|
| TMS | J4-6 | | TDI | J4-5 | | TDO | J4-4 | | TCK | J4-3 | | JTAG_EN | J4-2 |
|
On-board Peripherals
| Page properties |
|---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
...