Page History
...
- Connect MiniUSB cable to J28 XMOD (XMOD2 label)
- Set TEBF0808 DIP Switch S4-3 in ON position
- Power ON the board (ATX Power or external 12V)
- Run "Lattice Diamond Programmer"
Select "Create new project from JTAG chain" and press "OK"
Select Port: FTUSB-1
After scan 2 MachXO2 devices should be detected in chain- Select "LCMXO2-1200HC" as "Device" for both columns.
In first column click to "File Name" and then to "...". Select "SCM_REV*.jed" file (Master CPLD File).
In second column click to "File Name" and then to "...". Select "SCS_REV06*.jed" file (SlaveCPLD File).
Run "Design"->"Program" from main menu
Wait operations to complete
Available CPLD Firmware
- TEBF0808 CPLDs CPLD - Firmware description of Master an Slave CPLDwith different Variants for PCB REV03/04 and newer
- Default delivered Firmware (SCM_07A_default.jed/SCS_07A_default.jed)
- Power Down Disabled (SCM_07B_powerdown_disabled.jed/SCS_07B_powerdown_disabled.jed) -can be used to power on with main power supply, if Jumper is add to J10-6 and J10-8 instead of Enclosure Button
- MicroSD Boot Disabled (SCM_07C_msdboot_disabled.jed/SCS_07C_msdboot_disabled.jed) -for designs where microSD should not change the boot mode.
- TEBF0808 Master CPLD - Firmware description Master CPLD
- TEBF0808 Slave CPLD - Firmware description Slave CPLD Default delivered Firmware
- It's recommended to update always both CPLDs together
Overview
Content Tools