Page History
...
| J21 Position | S3-1 (CM1) | S3-2 (CM0) | FMC_VADJ Voltage | VIOTB Voltage | Notes |
|---|---|---|---|---|---|
| 1-2 | - | - | - | 3.3V | |
| 2-3 | OFF | OFF | 1.8V | 1.8V | |
| 2-3 | ON | OFFON | 2.5V | 2.5V | |
| 2-3 | OFF | ONOFF | 3.3V | 3.3V | |
| 2-3 | ON | ON | 1.8V | 1.8V | This setting also enables JTAG access to the System Controller CPLD on the SoM via B2B connector JB2. |
Table 3: Jumper J21 and DIP-switch S3 settings for VIOTB voltage configuration.
Note: Exact function of the S3-1 and S3-2 switches depend on the TE0705 System Controller CPLD firmware. For more detailed information, refer to the documentation of the TE0705 System Controller CPLD.
...
| Date | Revision | Contributors | Description | ||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
| ||||||||||||||||||||||||||
| 2019-03-14 | v.16 | John Hartfiel |
| ||||||||||||||||||||||||||
| 2017-02-08 | V.11 | Ali Naseri, Jan Kumann |
| ||||||||||||||||||||||||||
| -- | all |
|
|
Disclaimer
| Include Page | ||||
|---|---|---|---|---|
|
Overview
Content Tools