Page properties |
---|
|
Template Revision 2.12
- Module: TRM Name always "TE Series Name" +TRM
Example: "TE0728 TRM" - Carrier: TRM Name usually "TEB Series Name" +TRM
Example: "TEB0728 TRM"
|
HTML |
---|
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
Page properties |
---|
|
Important General Note:
|
Page properties |
---|
|
----------------------------------------------------------------------- |
Page properties |
---|
|
Note for Download Link of the Scroll ignore macro: |
Scroll pdf ignore |
---|
Table of Contents |
Overview
The Trenz Electronic CR00140-01 is a CRUVI motor driver module. It supports motors with up to 4 phases up to 40V.
Refer to http://trenz.org/ for the current online version of this manual and other available documentation.
Key Features
Page properties |
---|
|
Note: 'description: Important components and connector or other Features of the module → please sort and indicate assembly options Key Features' must be split into 6 main groups for modues: - SoC/FPGA
- Package:
- Speed:
- Temperature:
- RAM/Storage
- On Board
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
Key Features' must be split into 6 main groups for carrier: - Modules
- TE0808, TE807, TE0803,...
- RAM/Storage
- On Board
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
|
- On Board
- MAX10 CPLD
- 2 phase current measurement
- DC_LINK voltage measurement
- 4x LEDs (2 power indicator, 2 user)
- 2x Pushbutton
- Interface
- 4 phase screw terminal motor connector
- CRUVI for control
- 1x high speed connector
- 1 low speed connector
- 6x1 pin header for single ended sensors
- 5x2 pin header for differential sensors
- Power
- screw terminal for up to 40 V DC motor supply
- Dimension
Block Diagram
Page properties |
---|
|
add drawIO object here.
|
Scroll Title |
---|
anchor | Figure_OV_BD |
---|
title | CR00140 block diagram |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 15 |
---|
diagramName | BD_CR00140 |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 650 |
---|
|
|
Scroll Only |
---|
|
|
Main Components
Page properties |
---|
|
Notes : - Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
Scroll Title |
---|
anchor | Figure_OV_MC |
---|
title | CR00140 main components |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 5 |
---|
diagramName | MC_CR00140 |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 637 |
---|
|
|
Scroll Only |
---|
|
|
- Motor connector screw terminal, J8
- Power supply screw terminal, J7
- 5x2 pinheader, base for TEI0004 JTAG programmer, J10
- 5x2 pinheader for sensor selection, J3
- 6x1 pinheader for single ended sensors, J1
- 5x2 pinheader for differential sensors, J2
- User push buttons, S1, S2
- User LEDs, D1, D2
- LED DC_Link, D4
- LED Power Good, D3
- DCDC for 15V, U1
- DCDC for 5V, U2
- half bridge drivers, U8, U9, U10, U11
- MAX10 CPLD, U25
- CRUVI high speed connector
- CRUVI low speed connector
- ADCs, U3, U5, U7
- Shunt resistors, R22, R28
Initial Delivery State
Page properties |
---|
|
Notes : Only components like EEPROM, QSPI flash can be initialized by default at manufacture. If there is no components which might have initial data ( possible on carrier) you must keep the table empty |
Scroll Title |
---|
anchor | Table_OV_IDS |
---|
title | Initial delivery state of programmable devices on the module |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Storage device name | Content | Notes |
---|
MAX10 CPLD | default firmware REV01 | See firmware documentation |
|
Signals, Interfaces and Pins
Page properties |
---|
|
Notes : - For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
|
Board to Board (B2B) I/Os
FPGA bank number and number of I/O signals connected to the B2B connector:
Scroll Title |
---|
anchor | Table_SIP_B2B |
---|
title | General PL I/O to B2B connectors information |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
CPLD Bank | B2B Connector | I/O Signal Count | Voltage Level | Notes |
---|
3 | J9 | 12 x LVDS / 24 I/Os | VADJ | 6 x RX + 6 x TX | 3 | J9 | 4 I/Os | VADJ |
| 8 | J9 | 4 I/Os | 3.3V | Constant 3.3V | 1B | J9 | 5 I/Os | 3.3V | JTAG, JTAGEN, Constant 3.3V | 8 | J11 | 8 x I/Os | 3.3V | Constant 3.3V |
|
JTAG Interface
JTAG access to the CPLD of CR00140 is possible via the CRUVI high speed connector J9 and the pinheader J10, which is a base for TEI004 JTAG programmer. The JTAGEN signal is pulled up and available on J9 only. If JTAGEN is pulled low, the four signals can be used as user I/Os.
Scroll Title |
---|
anchor | Table_SIP_JTG |
---|
title | JTAG pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
JTAG Signal | B2B Connector | Pin header | Notes |
---|
TMS | J9-55 | J10-5 | pull up | TDI | J9-51 | J10-9 | pull up | TDO | J9-53 | J10-3 | - | TCK | J9-59 | J10-1 | pull down | JTAGEN | J9-57 | - | high for enable JTAG port of CPLD, low for user I/Os, pull up | UART_RX | - | J10-7 | CPLD Firmware dependent, see Firmware | UART_TX | - | J10-8 | CPLD Firmware dependent, see Firmware | RST | - | J10-6 | CPLD Firmware dependent, see Firmware | +3.3V_D | J9-4, J9-9 | J10-4 | - | DGND | several, see CRUVI | J10-2, J10-10 | - |
|
Sensor Interface
The pin headers J1, J2 and J3 constitute the sensor interface. It can be e.g. used with Encoders or Hall sensors. J3 is the selector between differential sensor interface (J2) or single ended sensors (J1). Connecting sensors is only allowed to one of the two pinheaders (J1/J2), the other one has to stay unconnected. In the figure below the jumper configuration of J3 to enable one or the other type of sensor interface is depicted.
Scroll Title |
---|
anchor | Figure_OV_Jumpers |
---|
title | CR00140 Jumpers |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 6 |
---|
diagramName | CR00140_Jumper |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 242 |
---|
|
|
Scroll Only |
---|
|
|
The pinheaders for connection of the sensors are further described in the following table. For differential configuration 100 Ohm parallel termination is used.
Scroll Title |
---|
anchor | Table_SIP_Sensors |
---|
title | Sensor pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal | J1 pin (singel ended) | J2 pin (differential) |
---|
ISO_ENC_A_P | 3 | 6 | ISO_ENC_A_N | - | 5 | ISO_ENC_B_P | 5 | 8 | ISO_ENC_B_N | - | 7 | ISO_ENC_I_P | 2 | 10 | ISO_ENC_I_N | - | 9 | DGND | 4 | 3 | +5.0V_D | 1, 6 | 2 |
|
Motor Interface
CR00140 has a motor interface, where up to 4 phases can be driven.
Warning |
---|
Check carefully correct connection of the phases of the motor, according to the motor and the implemented driving algorithm. |
Scroll Title |
---|
anchor | Table_SIP_Motor |
---|
title | Motor pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal | J8 pin lable | Note |
---|
Motor_A | A | Current measurement via R22 and ADC U3 | Motor_B | B | Current measurement via R28 and ADC U5 | Motor_C | C | - | Motor_D | D | - |
|
CRUVI
For the connection to a control unit, the CRUVI interface is implemented. One high speed connector J9 and one low speed connector J11 are assembled. The connectors are further described in section B2B Connectors. The connection of the signals and the voltage levels is described in the CPLD section.
Scroll Title |
---|
anchor | Table_SIP_CRUVI |
---|
title | CRUVI signals |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal | Connector - Pin |
---|
X0 | J11-3 | X1 | J11-5 | X2 | J11-7 | X3 | J11-9 | X4 | J11-4 | X5 | J11-10 | X6 | J11-1 | X7 | J11-2 | DGND | J11-6, J9-12, J9-18, J9-24, J9-30, J9-42, J9-48, J9-54, J9-13, J9-19, J9-25, J9-31, J9-37, J9-43, J9-49 | +3.3V_D | J11-8, J9-4, J9-9 | +5.0V_D | J11-12, J9-60 | VADJ | J9-36 | A0_P | J9-14 | A0_N | J9-16 | A1_P | J9-20 | A1_N | J9-22 | A2_P | J9-26 | A2_N | J9-28 | A3_P | J9-32 | A3_N | J9-34 | A4_P | J9-38 | A4_N | J9-40 | A5_P | J9-44 | A5_N | J9-46 | B0_P | J9-15 | B0_N | J9-17 | B1_P | J9-21 | B1_N | J9-23 | B2_P | J9-27 | B2_N | J9-29 | B3_P | J9-33 | B3_N | J9-35 | B4_P | J9-398 | B4_N | J9-41 | B5_P | J9-45 | B5_N | J9-47 | HSIO | J9-2 | HSO | J9-6 | RESET | J9-8 | HSI | J9-10 | TDI | J9-51 | TDO | J9-53 | TMS | J9-55 | JTAGEN | J9-57 | TCK | J9-59 | SMB_ALERT | J9-3 | SMB_SDA | J9-5 | SMB_SCL | J9-7 | REFCLK | J9-11 |
|
On-board Peripherals
Page properties |
---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
CPLD
A Intel/Altera MAX10 FPGA 10M08SAU169C8G (U25) is used as system controller. Table below lists the SC CPLD I/O signals and pins.
Scroll Title |
---|
anchor | Table_OBP_LED |
---|
title | On-board LEDs |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal name | SC CPLD Pin | CPLD Bank | Connected to | Function | Notes |
---|
X0 | B9 | 8 | J11-3 | CPLD firmware dependent | See CPLD Firmware | X1 | A8 | 8 | J11-5 | CPLD firmware dependent | See CPLD Firmware | X2 | A7 | 8 | J11-7 | CPLD firmware dependent | See CPLD Firmware | X3 | A6 | 8 | J11-9 | CPLD firmware dependent | See CPLD Firmware | X4 | D8 | 8 | J11-4 | CPLD firmware dependent | See CPLD Firmware | X5 | B6 | 8 | J11-10 | CPLD firmware dependent | See CPLD Firmware | X6 | C9 | 8 | J11-1 | CPLD firmware dependent | See CPLD Firmware | X7 | E8 | 8 | J11-2 | CPLD firmware dependent | See CPLD Firmware | A0_P | J8 | 3 | J9-14 | CPLD firmware dependent | See CPLD Firmware | A0_N | K8 | 3 | J9-16 | CPLD firmware dependent | See CPLD Firmware | A1_P | M13 | 3 | J9-20 | CPLD firmware dependent | See CPLD Firmware | A1_N | M12 | 3 | J9-22 | CPLD firmware dependent | See CPLD Firmware | A2_P | M9 | 3 | J9-26 | CPLD firmware dependent | See CPLD Firmware | A2_N | M8 | 3 | J9-28 | CPLD firmware dependent | See CPLD Firmware | A3_P | N8 | 3 | J9-32 | CPLD firmware dependent | See CPLD Firmware | A3_N | N7 | 3 | J9-34 | CPLD firmware dependent | See CPLD Firmware | A4_P | M7 | 3 | J9-38 | CPLD firmware dependent | See CPLD Firmware | A4_N | N6 | 3 | J9-40 | CPLD firmware dependent | See CPLD Firmware | A5_P | K5 | 3 | J9-44 | CPLD firmware dependent | See CPLD Firmware | A5_N | J5 | 3 | J9-46 | CPLD firmware dependent | See CPLD Firmware | B0_P | N5 | 3 | J9-15 | CPLD firmware dependent | See CPLD Firmware | B0_N | N4 | 3 | J9-17 | CPLD firmware dependent | See CPLD Firmware | B1_P | J7 | 3 | J9-21 | CPLD firmware dependent | See CPLD Firmware | B1_N | K7 | 3 | J9-23 | CPLD firmware dependent | See CPLD Firmware | B2_P | L11 | 3 | J9-27 | CPLD firmware dependent | See CPLD Firmware | B2_N | M11 | 3 | J9-29 | CPLD firmware dependent | See CPLD Firmware | B3_P | L10 | 3 | J9-33 | CPLD firmware dependent | See CPLD Firmware | B3_N | M10 | 3 | J9-35 | CPLD firmware dependent | See CPLD Firmware | B4_P | J6 | 3 | J9-398 | CPLD firmware dependent | See CPLD Firmware | B4_N | K6 | 3 | J9-41 | CPLD firmware dependent | See CPLD Firmware | B5_P | L5 | 3 | J9-45 | CPLD firmware dependent | See CPLD Firmware | B5_N | L4 | 3 | J9-47 | CPLD firmware dependent | See CPLD Firmware | HSIO | N9 | 3 | J9-2 | CPLD firmware dependent | See CPLD Firmware | HSO | N10 | 3 | J9-6 | CPLD firmware dependent | See CPLD Firmware | RESET | M5 | 3 | J9-8 | CPLD firmware dependent | See CPLD Firmware | HSI | N12 | 3 | J9-10 | CPLD firmware dependent | See CPLD Firmware | TDI | F5 | 1B | J9-51, J10-9 | JTAG / user IO CPLD firmware dependent | See CPLD Firmware | TDO | F6 | 1B | J9-53, J10-3 | JTAG / user IO CPLD firmware dependent | See CPLD Firmware | TMS | G1 | 1B | J9-55, J10-5 | JTAG / user IO CPLD firmware dependent | See CPLD Firmware | JTAGEN | E5 | 1B | J9-57 | JTAG enable CPLD firmware dependent | See CPLD Firmware | TCK | G2 | 1B | J9-59, J10-1 | JTAG / user IO CPLD firmware dependent | See CPLD Firmware | SMB_ALERT | K2 | 2 | J9-3 | CPLD firmware dependent | See CPLD Firmware | SMB_SDA | H5 | 2 | J9-5 | CPLD firmware dependent | See CPLD Firmware | SMB_SCL | H4 | 2 | J9-7 | CPLD firmware dependent | See CPLD Firmware | REFCLK | M2 | 2 | J9-11 | CPLD firmware dependent | See CPLD Firmware | BUTTON1 | C10 | 8 | S2 | CPLD firmware dependent | activ low, See CPLD Firmware | BUTTON2 | B10 | 8 | S1 | CPLD firmware dependent | activ low, See CPLD Firmware | ENC_A | A10 | 8 | U13-13 | Sensor input channel A | - | ENC_B | A9 | 8 | U13-12 | Sensor input channel B | - | ENC_I | A11 | 8 | U13-14 | Sensor input channel I | - | LED0 | D6 | 8 | D2 | CPLD firmware dependent | See CPLD Firmware | LED1 | B2 | 8 | D1 | CPLD firmware dependent | See CPLD Firmware | M_BEMF_B_D | B5 | 8 | U15-13 | Back EMF signal phase B | - | M_BEMF_C_D | A5 | 8 | U15-12 | Back EMF signal phase C | - | M_BEMF_A_D | A4 | 8 | U15-14 | Back EMF signal phase A | - | M_PWM_AH | F1 | 1A | U8-2 | Phase A half bridge high (DC_LINK) side driver signal | - | M_PWM_AL | E3 | 1A | U8-3 | Phase A half bridge low (PGND) side driver signal | - | M_PWM_BH | E1 | 1A | U9-2 | Phase B half bridge high (DC_LINK)side driver signal | - | M_PWM_BL | D1 | 1A | U9-3 | Phase B half bridge low (PGND) side driver signal | - | M_PWM_CH | E4 | 1A | U10-2 | Phase C half bridge high (DC_LINK)side driver signal | - | M_PWM_CL | C1 | 1A | U10-3 | Phase C half bridge low (PGND) side driver signal | - | M_PWM_DH | C2 | 1A | U11-2 | Phase D half bridge high (DC_LINK) side driver signal | - | M_PWM_DL | B1 | 1A | U11-3 | Phase D half bridge low (PGND) side driver signal | - | SD_IA | E6 | 8 | U3-6 | Current measurement phase A | 33 Ohm series Resistor | SCLK_A | B3 | 8 | U3-7, U5-7 | Clock for ADC for current measurement phase A and B | (5-20 MHz) | SD_V | B4 | 8 | U7-6 | Voltage measurement DC_LINK | 33 Ohm series Resistor | SD_IB | A2 | 8 | U5-6 | Current measurement phase B | 33 Ohm series Resistor | SCLK_V_A | A3 | 8 | U7-7 | Clock for ADC for voltage measurement DC_LINK | (5-20 MHz) | M_DISABLE_D_D | J1 | 2 | U11-5 | Halfe bridge disable phase D | disabled when high, pull up connected | M_DISABLE_A_D | M1 | 2 | U8-5 | Halfe bridge disable phase A | disabled when high, pull up connected | M_DISABLE_B_D | L2 | 2 | U9-5 | Halfe bridge disable phase B | disabled when high, pull up connected | M_DISABLE_C_D | K1 | 2 | U10-5 | Halfe bridge disable phase C | disabled when high, pull up connected | REFCLK | M2 | 2 | J9-11 | CPLD firmware dependent | - | RST | M3 | 2 | J10-6 | CPLD firmware dependent | - | UART_RX | N2 | 2 | J10-7 | CPLD firmware dependent | - | UART_TX | N3 | 2 | J10-8 | CPLD firmware dependent | - | CLK_25MHZ | H6 | 2 | U26-3 | Clock input for accurate 25 Mhz clk. | - |
|
CPLD Bank Voltages
Scroll Title |
---|
anchor | Table_PWR_BV |
---|
title | CPLD bank voltages. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
| Schematic Name | | Notes |
---|
1A | +3.3V_D | 3.3V | Provided via CRUVI | 1B | +3.3V_D | 3.3V | Provided via CRUVI | 2 | +3.3V_D | 3.3V | Provided via CRUVI | 3 | VADJ | 1.8V, 2.5V, 3.3V | Provided via CRUVI, supported voltage levels are determined by the CPLD Firmware, and the connected base/controller. | 8 | +3.3V_D | 3.3V | Provided via CRUVI |
|
LEDs
Scroll Title |
---|
anchor | Table_OBP_LED |
---|
title | On-board LEDs |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Designator | Color | Connected to | Signal name | Active Level | Note |
---|
D1 | green | U25-B2 | LED1 | high | User LED, CPLD Firmware dependent, see Firmware description. | D2 | green | U25-D6 | LED0 | high | User LED, CPLD Firmware dependent, see Firmware description. | D3 | green | U1-A3, U2-B1 | PGOOD | high | ON when +15.0V_M and +5.0V_M regulator indicated power good. Connected via transistor T1. | D4 | green | DC_LINK | - | low | ON when DC_LINK above 11.7V. Connected via comparator U14D to DC_LINK |
|
Scroll Title |
---|
anchor | Table_OBP_LED |
---|
title | On-board LEDs |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Designator | Connected to | Signal name | Active Level | Note |
---|
S1 | U25-B10 | BUTTON2 | low | User button, CPLD Firmware dependent, see Firmware description. | S2 | U25-C10 | BUTTON1 | low | User button, CPLD Firmware dependent, see Firmware description. |
|
ADCs
There are three isolating AD7403-8 ADCs for continous measurement oft phase A current (U3), phase B current (U5) and the DC_LINK voltage (U7) on board. The currents are measured through the shunt resistors R22, R28 for phase A and B respectively. The ADC clock is routed to the CPLD. For Currents the clock has the signal lable SCLK_A and for the voltage SCLK_V_A. The data signals are also routed to the CPLD. See CPLD Firmware for further description.
BEMF
Back EMF zero crossing signals for sensor-less motor control are implemented for Phase A, B and C. They are routed via a triple channel Digital isolator (U15) to the CPLD. See CPLD Firmware for further description.
Half bridge drivers
Four ADuM7223 isolated half bridge drivers (U8, U9, U10, U11) are used for driving the four phases.
DCDCs
On the Motor side are two DCDCs on board. LTM8053 (U1) is utilized for the generation of the 15V transistor control voltage from VIN and can be measured on Testpoint TP1. A LTM8074 DCDC (U2) generates 5V from VIN for miscellaneous signals on the motor side of the PCB and can be measured on TP2.
Two isolated DCDCs ADUM5028 (U4, U6) are used for the generation two seperate clean 5V for the supply of the current measurement ADCs U3 and U5.
Power and Power-On Sequence
Page properties |
---|
|
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn: - Power on-sequence
- Power distribution
- Voltage monitoring circuit
|
Power Supply
The motor driving stage is supplied via connector J7 with maximum of 40V DC. Polarity of the powersupply is noted on the PCB.
Warning |
---|
Check powersupply for correct polarity. Inversion of polarity will damage the module. At least Transistor T11 may be harmed. Furthermore make sure that under any circumstances the absolute maximum voltage does not exceed 42V. |
Power Consumption
The power consumption on the motor stage side (J7) is dominated by the connected motor and the corresponding driving algorithm. The idle consumption is given below.
Scroll Title |
---|
anchor | Table_PWR_PC |
---|
title | Power Consumption |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Input Pin | Typical Current | Note |
---|
VIN | ~ 47mA | @24V (J7), no motor connected, no PWM signal driven. |
|
Power Distribution Dependencies
Scroll Title |
---|
anchor | Figure_PWR_PD |
---|
title | Power Distribution |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 9 |
---|
diagramName | PD_CR00140 |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 412 |
---|
|
|
Scroll Only |
---|
|
|
Power-On Sequence
There is no power on sequence which has to be maintained.
Power Rails
Scroll Title |
---|
anchor | Table_PWR_PR |
---|
title | Module power rails. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Rail Name | B2B Connectors
| Direction | Notes |
---|
+3.3V_D | J11-8, J9-4, J9-9 | In | - | +5.0V_D | J11-12, J9-60 | In | - | VADJ | J9-36 | In | - | VIN | J7 | In | isolated |
|
Board to Board Connectors
Page properties |
---|
|
- This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series, For example: 6 x 6 SoM LSHM B2B Connectors
Include Page |
---|
| PD:6 x 6 SoM LSHM B2B Connectors |
---|
| PD:6 x 6 SoM LSHM B2B Connectors |
---|
|
|
Include Page |
---|
| CRUVI B2B Connectors |
---|
| CRUVI B2B Connectors |
---|
|
Technical Specifications
Absolute Maximum Ratings
Scroll Title |
---|
anchor | Table_TS_AMR |
---|
title | PS absolute maximum ratings |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Symbols | Description | Min | Max | Unit |
---|
VIN | Motor supply voltage | 0 | 42 | V | +3.3V_D | digital part 3.3V supply voltage | -0.3 | 3.9 | V | +5.0V_D | digital part 5V supply voltage | -0.3 | 6.0 | V | VADJ | IO Bank Voltage | -0.3 | 3.9 | V |
|
Recommended Operating Conditions
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Scroll Title |
---|
anchor | Table_TS_ROC |
---|
title | Recommended operating conditions. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Parameter | Min | Max | Units | Reference Document |
---|
VIN | 22 | 40 | V | LTM8053 datasheet | +3.3V_D | 3.135 | 3.465 | V | MAX10 datasheet | +5.0V_D | 4.75 | 5.25 | V | SN65LBC173AD datasheet | VADJ (3.3V operation) VADJ (2.5V operation) VADJ (1.8V operation) | 3.135 2.375 1.71 | 3.465 2.625 1.89 | V | MAX10 datasheet | T | -40 | 105 | °C | AD7403-8 (junction) | T (ambient) | -40 | 85 | °C | SN65LBC173AD datasheet |
|
Physical Dimensions
PCB thickness: 1.6 mm.
Scroll Title |
---|
anchor | Figure_TS_PD |
---|
title | Physical Dimension |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 2 |
---|
diagramName | PhDim_CR00140 |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 355 |
---|
|
|
Scroll Only |
---|
scroll-pdf | true |
---|
scroll-office | true |
---|
scroll-chm | true |
---|
scroll-docbook | true |
---|
scroll-eclipsehelp | true |
---|
scroll-epub | true |
---|
scroll-html | true |
---|
|
|
|
Currently Offered Variants
Scroll Title |
---|
anchor | Table_VCP_SO |
---|
title | Trenz Electronic Shop Overview |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
Revision History
Hardware Revision History
Scroll Title |
---|
anchor | Table_RH_HRH |
---|
title | Hardware Revision History |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Date | Revision | Changes | Documentation Link |
---|
2019-12-20 | 01 | Prototypes | - |
|
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Scroll Title |
---|
anchor | Figure_RV_HRN |
---|
title | Board hardware revision number. |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | false |
---|
revision | 3 |
---|
diagramName | HRN_CR00140 |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | top |
---|
diagramWidth | 397 |
---|
|
|
Scroll Only |
---|
|
|
Document Change History
Page properties |
---|
|
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
Scroll Title |
---|
anchor | Table_RH_DCH |
---|
title | Document change history. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
style | |
---|
widths | |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Date | Revision | Contributor | Description |
---|
Page info |
---|
infoType | Modified date |
---|
dateFormat | yyyy-MM-dd |
---|
type | Flat |
---|
|
| Page info |
---|
infoType | Current version |
---|
prefix | v. |
---|
type | Flat |
---|
showVersions | false |
---|
|
| Page info |
---|
infoType | Modified by |
---|
type | Flat |
---|
showVersions | false |
---|
|
| | -- | all | Page info |
---|
infoType | Modified users |
---|
type | Flat |
---|
showVersions | false |
---|
|
| |
|
Disclaimer
Include Page |
---|
| IN:Legal Notices |
---|
| IN:Legal Notices |
---|
|