Page History
...
- Create a new folder in a known existing folder via mkdir software
- Change into the new folder via cd software
- Clone the git repository via git clone https://github.com/altera-opensource/linux-sodfpga.git
- Change into the new folder via cd linux-socfpga://git
- Look into the tags inside the repository via git tag -l rel*
- Select one of the tags and check it out via git checkout rel_socfpga-<selection>
- Load the default configuration for the kernel via make ARCH=arm socfpga_defconfig
- Install packages for kernel configuration via sudo apt-get install libncurses5-dev
- Open the kernel configuration dialogue via make ARCH=arm menuconfig
- Configure the kernel according its needs or close the kernel configuration if no configuration should be done.
- Generate the kernel via make ARCH=arm LOCALVERSION= zImage
- If the previous command does not work, try to use this one: make ARCH=arm CROSS-COMPILE=arm-linux-gnueabihf LOCALVERSION= zImage
- After compilation, which can can last a longer time, the kernel should be in folder arch/arm/boot
...
Overview
Content Tools