Page History
...
- FPGA_IO1 (AE16 of RFSoC) is connected with CPLD_IO2 (S1-3 Dip switch on the carrier board) when the FPGA is programmed correctly otherweise this pin is high impedance. After programming configuration of the FPGA can user use this pin as input.
- FPGA_IO0 (AE18 of RFSOC) is connected with LED on the RFSoC module (D1) if the FPGA is programmed completely otherweise this LED (D1) blinks according to the state of the power-on sequencing. After configuration of the FPGA can be controlled this LED (D1) by user.
| Component | Designator | Pin Name | Pin Number | Board | Interface | Connected in the Hardware with | Designator | Pin Name | Pin Number | Board | after programming the FPGA connected with | Designator | Pin Name | Pin Number | Board |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dip Switch | S1-3 | CPLD_IO2 | --- | TEB0835 | B2B | CPLD | U31 | CPLD_IO2 | 40 | TE0835 | FPGA | U1 | FPGA_IO1 | AE16 | TE0835 |
| FPGA | U1 | FPGA_IO0 | AE18 | TE0835 | --- | CPLD | U31 | FPGA_IO0 | 27 | TE0835 | LED | D1 | --- | --- | TE0835 |
...
Overview
Content Tools