Page History
...
- Status: SUCCESS ("DONE PIN Checking: SUCCESS")
- Status. WARNING ("DONE PIN Checking: FAILURE")
Status: SUCCESS ("DONE PIN Checking: SUCCESS")
If the bitstream (*.bit or *.mcs) of correct FPGA is selected (for example: TE0320 for TE0320 but also Spartan3A 1800 for Spartan3A 1800 FPGA, not Spartan3A 3400 for Spartan3A 1800) and the switches are correctly setted, the “DONE PIN Checking” should end successfully and the FPGA should be ready to work.
| Scroll Title | ||
|---|---|---|
| ||
|
Status. WARNING ("DONE PIN Checking: FAILURE")
SPI Flash programming can be ended successfully, but the “DONE PIN Checking” can fails. This may happens if the bitstream of wrong FPGA is selected (TE0300 for TE0320, Spartan3E for Spartan3A FPGA, Spartan3A 3400 for Spartan3A 1800 ) or if the switches are not correctly set.
...
In the case of "DONE PIN Checking: SUCCESS" the FPGA Configuration Procedure is ended.
Otherwise ( "DONE PIN Checking: FAILURE") you could try a power off/on cycle (turn the module off and on with the correct switches setting). If this solution doesn't work, you have almost certainly programmed the wrong bitstream in the SPI Flash memory.
Overview
Content Tools