Versions Compared

Old Version 4

changes.mady.by.user Thomas Brünger

Saved on

compared with

New Version Current

changes.mady.by.user Manuela Strücker

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Set B2B Pin J1-148 (JTAG_EN) to VDD (3.3V).

With TEBA0745TEB0745:

  • Set DIP S2-2 to ON

Available CPLD Firmware

  • TE0745 CPLD  - Firmware description
    with different Boot mode variants
    • QSPI/SD
      • default delivered firmware
      • Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
    • QSPI/SD/JTAG
      • optional firmware
      • Boot mode depends on MIO0 (sd card detection) connected to B2B J2-137 Pin (SD card detection/ Zynq (MIO0))
        • sd card detected: Boot mode can be changed between QSPI or SD with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
        • no sd card detected: Boot mode can be changed to JTAG with B2B J2-133 Pin (BOOTMODE/ Zynq (MIO4)).
      default delivered Firmware

Download

  • TE0745/<PCB Revision>/Firmware/
    • Use files from the subfolders of your PCB revision

...