Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  1. Connect MiniUSB cable to XMOD
  2. Set DIP Switch S1-2 to ON position, see TE0706 TRM#4-bitDIP-switch
  3. Power ON the board
  4. Run "Lattice Diamond Programmer"
  5. Select "Create new project from JTAG chain" and press "OK"

Available CPLD Firmware

  • TE0711 CPLD - Firmware description (working in process)
    • default delivered Firmware