Page History
...
Code Block | ||
---|---|---|
| ||
/include/ "system-conf.dtsi" / { }; /* QSPI PHY */ &qspi { #address-cells = <1>; #size-cells = <0>; status = "okay"; flash0: flash@0 { compatible = "jedec,spi-nor"; reg = <0x0>; #address-cells = <1>; #size-cells = <1>; }; }; /* ETH PHY */ &gem0 { phy-handle = <&phy0>; phy0: phy0@1 { device_type = "ethernet-phy"; reg = <1>; }; }; /* USB 2.0 */ &dwc3_0 { status = "okay"; dr_mode = "host"; maximum-speed = "high-speed"; /delete-property/phy-names; /delete-property/phys; /delete-property/snps,usb3_lpm_capable; }; &dwc3_1 { status = "okay"; dr_mode = "host"; maximum-speed = "high-speed"; /delete-property/phy-names; /delete-property/phys; /delete-property/snps,usb3_lpm_capable; }; /* SD*/ &sdhci1 { disable-wp; no-1-8-v; }; /* SPI */ // &spi0 { // num-cs = <1>; // ext_command:spidev@0{ // compatible="spidev"; // reg = <0>; //chipselect 0 // spi-max-frequency= <100000>; // spidev-name = "EXT"; // }; // }; // /* I2C */ // &i2c0 { // #address-cells = <1>; // #size-cells = <0>; // }; &i2c1{ // TEC0850 #address-cells = <1>; #size-cells = <0>; // Instantiate EEPROM driver eeprom153: eeprom@53 { compatible = "atmel,24c02"; reg = <0x53>; }; // Instantiate EEPROM driver eeprom150: eeprom@50 { compatible = "atmel,24c128"; reg = <0x50>; }; // There is also Clock generator chip // Si5345 at address 0x69, but there is // no standard driver in Linux kernel yet }; |
Kernel
...
Deactivate:
CONFIG_CPU_IDLE (only needed to fix JTAG Debug issue)
CONFIG_CPU_FREQ (only needed to fix JTAG Debug issue)
Rootfs
Activate:
- i2c-tools
Applications
...
Scroll Title | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
...
Overview
Content Tools