Page History
...
- TEI0006 Intel MAX 10 - Firmware description
Download
Firmware is available on:
- TEI0006 Ressources → Download area → REVxx → Firmware
General instructions
Firmware Update - General Requirements
- Quartus Prime software, available for free (lite version) on https://www.intel.de/
- Arrow USB Programmer Driver
- Quartus compatible JTAG programmer, for example:
- TEI0004 - Arrow USB Programmer2 or carrier board with FTDI for JTAG
- Other JTAG Programmer compatible with Quartus Programmer
- JTAG must be connected to FPGA JTAG
- Correct Firmware (*.pof file) from Download area
Firmware Update - General Procedure
Important:
- Connect only one JTAG device to host PC.
- Close all other JTAG programs.
Procedure:
- Enable FPGA JTAG access (see JTAG section on Firmware description)
- Connect JTAG
- Power on system
- Open Quartus Prime
- Open Quartus Programmer from top menu: Tools → Programmer
- Select from Programmer top menu: Edit → Hardware Setup
- Select via the drop down menu: Arrow-USB-Blaster [USB0] (Installation of Arrow USB Programmer Driver needed) and close the window
- Click Add File...
- Select correct Firmware from Download area and press Open
- Click Start to program the device
- for PCB REV04 and newer
- TEI0006-REV03 Intel MAX 10 - Firmware description for PCB REV03
Download
- TEI0006/<PCB Revision>/Firmware/
- Use files from the subfolders of your PCB revision
General instructions
Include Page | ||||
---|---|---|---|---|
|
Overview
Content Tools