Versions Compared

Old Version 120

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Module: 
    • Trenz Electronic Module TE0745
    • Temperature: -40 to 85 °C
  • On Board:
    • 24V power supply terminal
    • 1 x EMI Network Filter
    • 3 x Variable Step Down Regulator Module (VDRM) with head sink
    • 2 x Synchronous Buck Regulator
    • 2 x Button (User / Reset)
    • 2 x LED (Green)
  • Interfaces:
    • 1 x XMOD (TE0790) Pin Header (JTAG / UART)
    • 1 x Pin Header (JTAG)
    • 1 x microSD connector
    • 1 x RJ45 Ethernet connector
    • 1 x USB Host Connector
    • 8 x SFP-Connector
    • 6 x Pin Header 50 pol. (FPGA Bank I/O's and Power)
    • 6 x Pin Header 12 pol. (FPGA Bank I/O's and Power)
    • 1 x battery holder
    • 2 x DIP Switch Array (VCC_HR_B / Modi)
  • Dimension: 200 mm x 231 mm

Block Diagram

...

Scroll Title
anchorFigure_OV_BD
titleTEB0745 block diagram


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1421
diagramNameTEB0745_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth640


Scroll Only



...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage device name

Content

Notes

EEPROMNot ProgrammedEUI-64 number programmed

Can be used for MAC



Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

...

Scroll Title
anchorTable_OV_BP
titleBoot process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE Signal State

ConnectConnected toB2BStatusBoot Mode

BOOTMODE

S1J2-133OpenQSPI
ShortSD Card


...

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Type

Schematic

Connection
Connected toB2BNote
Main Module Reset (
RST_IN_N
)

Push Button

S2 or J12-11 XMOD connector (Default XMOD Button)

, S2

J2-131Low Active Reset


Signals, Interfaces and Pins

...

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B ConnectorInterfacesNumber of I/ONotes
J1

User I/O

48 singel ended, 24 Differential

2 singel ended

Connected to Bank 13

48 singel ended, 24 Differential

2 singel ended

Connected to Bank 12
JTAG Interface5 single endedTCK, TDI, TMS, TDO, JTAG_EN
SFP+ Connector8 DiffSPF4....7_RX_N/P , SPF4....7_TX_N/P
J2

Ethernet PHY4 Differential
2 single endedPHY_LED0...1
USB1 DifferentialOTG_N/P
Control Signals3 single endedPS_SRST, BOOTMODE, RST_IN_N
Power Control Signal2 single endedPWR_PS_OK, PWR_PL_OK
I2C Bus2 single endedI2C_SDA, I2C_SCL
User I/O4 single endedMIO12...15

J3


User I/O6 Single endedMIO46...51
SD Card Connector6 Single endedSD_CLK, SD_CMD, SD_DAT0...3 (MIO40...45)
SFP+ Connector8 DifferentialSPF0....3_RX_N/P , SPF0....3_TX_N/P

...


XMOD Pin Header

JTAG access to the TEB0745 SoM is available through B2B connector JB1 and JB2. JTAG_EN is connected to J1-138, JTAG_EN can be activated through DIP Switch S1-2.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator

Connected to

B2B Pin

XMOD Header JB1Note
AMIO15J2-129JB1-3UART TX - Input to the module
BMIO14J2-127JB1-7UART RX - Output of the module
CTCKJ1-143JB1-4JTAG interface signal
DTDOJ1-145JB1-8JTAG interface signal
FTDIJ1-142JB1-10JTAG interface signal
HTMSJ1-144JB1-12

JTAG interface signal

GRST_IN_NJ2-131JB1-11RESET will be connected to Push Button on JTAG Programmer

...


There is a DIP switch, S2, on TE0790 adapter which must be set as following.

Scroll Title
anchorTable_SIP_OBPXmod_I2CDIP
titleI2C Address Xmod Adapter DIP-Switch Setting Description

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C DeviceI2C AddressDesignatorNotes
I2C_EXP0x72U16SFP 0-9
EEPROM0x51U33I/O EXP0x20...27U18...25

SD Card Socket

Power supply voltage for SD card holder is 3.3V.

DIP Switch,S2DefaultDescription
1ONUpdate Mode JTAG access to SC CPLD only
2OFFMust be always in OFF state.
3OFFVIO is supplied from Module
4ON3.3V  from XMOD


SFP+ Connectors

The TEB0745 is equipped with 8 SFP+ Connectors, 

Scroll Title
anchorTable_OBP_SDcardSFP
titleSD card interface MIOs and pinsSFP Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signals
PinConnected
to
to 
B2BNotesSD_CLKMIO40J3-150SD_CMDMIO41J3-152SD_DAT0MIO42J3-154SD_DAT1MIO43J3-156SD_DAT2MIO44J3-158SD_DAT3MIO45J3-160

RJ45 Connector

Ethernet Socket is connected to Board to Board (B2B)  JM2.

...

anchorTable_OBP_RJ45
titleLAN Transformer

...

Notes
SFP+ , J4SFP+, J6SFP+, J8SFP+, J10SFP+, J13SFP+, J15SFP+, J18SFP+, J20
TD+B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
TD-B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
RD+B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
RD-B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
TX FAULTIO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
TX DISABLE IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF2 IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF1IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF0IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
RS0IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
LOSIO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
RS1IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL


SD Card Socket

Power supply voltage for SD card holder is 3.3V.

Scroll Title
anchorTable_OBP_SDcard
titleSD card interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SignalsConnected toB2BNotes
SD_CLKMIO40J3-150
SD_CMDMIO41J3-152
SD_DAT0MIO42J3-154
SD_DAT1MIO43J3-156
SD_DAT2MIO44J3-158
SD_DAT3MIO45J3-160


RJ45 Connector

Ethernet Socket is connected to Board to Board (B2B)  JM2.

...

Test Points

...

anchorTable_SIP_TestPoint
titleTest Points Information

...

Test Point

...

B2B Connector

...

On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs
Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

...

DIP Switches

...

Schematic
Scroll Title
anchorTable_OBP_EEPRJ45
titleI2C EEPROM interface MIOs and pinsLAN Transformer

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO Pin
SignalB2BNotes
MIO10I2C_SCL
PHY_MDIO0_PJ2-
119
120
PHY_MDIO_N
MIO11I2C_SDA
J2-
121
Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C AddressDesignatorNotes0x51U33

DIP Switches

...

122
PHY_MDIO1_PJ2-126
PHY_MDIO1_NJ2-128
PHY_MDIO2_PJ2-132
PHY_MDIO2_NJ2-134
PHY_MDIO3_PJ2-138
PHY_MDIO3_NJ2-140
PHY_LED0J2-144
PHY_LED1J2-146


Test Points

JTAG_EN
Scroll Title
anchorTable_OBPSIP_DIPTestPoint
titleDIP Switch S1Test Points Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator

Test Point

Connected to
Signals

B2B Connector

NoteS1-ABootModeJ2-133S1-B
Notes
TP 15V-
TP 2VBAT_INJ1-
148
146
TP 3VCCIO18VJ2- J3
TP 4VCC_HR_BJ1
TP 5-9GND-
TP 10PS_1.8VJ2
TP 11
S1-C-S1-DPS_SWJ2-123
VCC_HR_B

...

J1
TP 123.3VJ1- J2
TP 13--
TP 14--
TP 15PWR_PL_OKJ2- 135
TP 16PWR_PS_OKJ2-139
TP 1724V_FUSED-
TP 183.3V_SFP-


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP_DIP
titleDIP Switch S4

...

Push Buttons

...


Scroll Title
anchorTable_OBP_Push_Button
titleOn - board push button =speripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceDesignator
Connected to
Notes
B2B
EEPROM
Active Level
U33
NoteS3USR_BTNJ3-153Active high
S2RST_IN_NJ2-131Active highGeneral Reset

...


DIP Switches

S1, S4
I2C SwitchU16
I/O ExpanderU18...U25
Push ButtonsS2, S3
LEDsD1, D5


EEPROM

Scroll Title
anchorTable_OBP_LEDEEP
titleOn-board LEDsI2C EEPROM interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator
MIO PinSchematic
Color
B2BNotes
B2BConnected toNoteD1LED1GreenJ3-149MIO48D5LED2GreenJ3-151MIO49

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

MIO10I2C_SCLJ2-119
MIO11I2C_SDAJ2-121



Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C DeviceDesignatorI2C AddressNotes
EEPROMU330x51


DIP Switches

There are two DIP Switches S1,S4.

Power Supply

Power supply with minimum current capability of 2.5 A for system startup is recommended.

Power Consumption

Scroll Title
anchorTable_PWROBP_PCDIP
titlePower ConsumptionDIP Switch S1

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input VoltageTypical Current
24VTBD*
VBATTBD*

* TBD - To Be Determined

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Distribution

...

Scroll Only

Image Removed

Power-On Sequence

...

anchorFigure_PWR_PS
titlePower Sequency

...

Scroll Only

Image Removed

Power Rails

...

anchorTable_PWR_PR
titleModule power rails.

...

JB3

...

Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.

  • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors

...

DesignatorConnected toB2BNote
S1-ABootModeJ2-133
S1-BJTAG_ENJ1-148
S1-C-

S1-DPS_SWJ2-123


VCC_HR_B voltage can be selected using DIP Switch S4 .

Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S4

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

S4-1S4-2S4-3S4-4Power VCC_HR_BNotes
OFFOFFOFFN.C.1,8V
OFFOFFONN.C.1,5V
OFFONOFFN.C.3,3V
OFFONONN.C.2,5V
ONOFFOFFN.C.0,8V
ONOFFONN.C.Do not use
ONONOFFN.C.1,25V
ONONONN.C.1,2V


I2C Switch

There is a I2C Switch on the TEB0745 which can be used in order to controll the SPF+ Connectors. 

Scroll Title
anchorTable_OBP_I2CSW
titleI2C Switch

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinSchematic Connected toNotes
VCC3.3V

SCLI2C_SCLB2B, J2
SDA

I2C_SDA

B2B, J2
nRESETI2C_RSTVoltage Translator, U34
A0GNDLow I2C address is 0x72
A13.3VHighI2C address is 0x72
A2GNDLowI2C address is 0x72
SD0/ SC0SFP0_SDA / SFP0_SDASFP+ Connector, J4
SD1/ SC1SFP1_SDA / SFP1_SDASFP+ Connector, J6
SD2/ SC2SFP2_SDA / SFP2_SDASFP+ Connector, J8
SD3/ SC3SFP3_SDA / SFP3_SDASFP+ Connector, J10
SD4/ SC4SFP4_SDA / SFP4_SDASFP+ Connector, J13
SD5/ SC5SFP5_SDA / SFP5_SDASFP+ Connector, J15
SD6/ SC6SFP6_SDA / SFP6_SDASFP+ Connector, J18
SD7/ SC7SFP7_SDA / SFP7_SDASFP+ Connector, J20



Scroll Title
anchorTable_OBP_I2CSWADD
titleI2C Address of I2C Switch

Scroll Table Layout

...

Technical Specifications

Absolute Maximum Ratings

...

anchorTable_TS_AMR
titlePS absolute maximum ratings

...

Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Parameter
I2C Device
Min
Designator
Max
I2C Address
Units
Notes
Reference DocumentVIN Supply Voltage2424VOperating Temperatur-40+85°C

Physical Dimensions

  • Module size: 200 mm x 231 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 3.5 mm.

  • PCB thickness: 1.6 mm.
I2C DeviceU160x72


IO Expanders

The TEB0745 is equipped with 8 I/O Expanders.

Scroll Title
anchorTable_OBP_IOEXP
titleIO Expander Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Scroll Title
anchorTable_OBP_SFP
titleSFP Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinConnected to Notes
IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25
nINTNot Connected Not Connected Not Connected Not Connected Not Connected Not Connected Not Connected Not Connected 
SCL

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2


SDA

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2

I2C Switch, U16

B2B, J2


A0GND3.3VGND3.3VGND3.3VGND3.3V 
A1GNDGND3.3V3.3VGNDGND3.3V 3.3V 
A2GNDGNDGNDGND3.3V3.3V 3.3V 3.3V 
VCC3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 3.3V 
P0...P7SFP+, J4SFP+, J6SFP+, J8SFP+, J10SFP+, J13SFP+, J15SFP+, J18SFP+, J20



In the following table you can find I2C addresses of I/O Expanders which would be designated by pins A0,A1 and A2. 

Scroll Title
anchorTable_OBP_IOEXPADD
titleI2C Addresses of I/O Expanders

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C DeviceDesignatorI2C AddressNotes
I/O ExpanderU180x20
U190x21
U200x22
U210x23
U220x24
U230x25
U240x26
U250x27


Push Buttons

There are two push buttons S2, S3.

Scroll Title
anchorTable_OBP_Push_Button
titleOn-board push button =s

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toB2BActive LevelNote
S3USR_BTNJ3-153Active high
S2RST_IN_NJ2-131Active highGeneral Reset


LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorColorB2BConnected toActive LevelNote
D1GreenJ3-149MIO48Active HighLED1
D5GreenJ3-151MIO49Active HighLED2


Power and Power-On Sequence

Page properties
hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit


Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


Power Supply

Power supply with minimum current capability of 2.5 A for system startup is recommended.

Power Consumption

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input VoltageTypical Current
24VTBD*
VBATTBD*


* TBD - To Be Determined

Power Distribution Dependencies

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision10
diagramNameTEB0745_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only

Image Added


Power-On Sequence

Scroll Title
anchorFigure_PWR_PS
titlePower Sequency


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision10
diagramNameTEB0745_PWR_PS
simpleViewerfalse
width640
linksauto
tbstylehidden
diagramWidth630


Scroll Only

Image Added


Power Rails

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Rail Name

B2B Connector

JM1 Pin

B2B Connector

JM2 Pin

B2B Connector

JM3 Pin

DirectionNotes
3.3V

147, 149, 151, 153,
155, 157, 159

154, 156, 158,160-OutputPL_VIN
VCCIO1254, 55--Outputhigh range bank I/O voltage
VCCIO13112, 113--Outputhigh range bank I/O voltage
VCCIO33--115, 120Outputhigh performance bank I/O voltage
VCCIO34-29, 30-Outputhigh performance bank I/O voltage
VCCIO35-87, 88-Outputhigh performance bank I/O voltage
VBAT_IN146--OutputRTC (battery-backed) supply voltage
PS_1.8V-130-Inputinternal 1.8V voltage level (Process System)


Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.

  • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors

Include Page
5.2 x 7.6 SoM ST5 and SS5 B2B Connectors
5.2 x 7.6 SoM ST5 and SS5 B2B Connectors

Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titlePS absolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsMinMaxUnitNote
VIN Supply Voltage024V
Storage Temperatur-25+85°C


Recommended Operating Conditions

Operating temperature range depends also on customer design and cooling solution.

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ParameterMinMaxUnitsReference Document
VIN Supply Voltage2025.4VSee LTC4365ITS8 Datasheet
Operating Temperatur-40+85°C


Physical Dimensions

  • Module size: 200 mm x 231 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 3.5 mm.

  • PCB thickness: 1.6 mm.
Page properties
hiddentrue
idComments

In 'Physical

Page properties
hiddentrue
idComments

In 'Physical Dimension' section, top and button view of moduloe must be insterted, information regarding physical dimention can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part)for every SoM.

For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below:

https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF

Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Trenz shop
TE0745
TEB0745 overview page
English pageGerman page


Revision History

Hardware Revision History

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

201605-25REV02-A
DateRevisionChangesDocumentation Link
2018-12-0602a
  • Resistors R14 and R15 was replaced by 953R (was 5K1)
  • Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
REV02-A01-REV01
2018-10-1902
  • U16 I2C expander: address set to 0x72
  • U33 EEPROM: address set to 0x51. Added variant to set address 0x52.
  • Changed power up sequence: 24V_FUSED -> 3.3V (Module power up) -> 5V -> VCCIO18, VCC_HR_B, 3.3V_SFP
  • Fixed PCB patch: U6 pin 18 connected to 5V, pin 19 connected to GND.
  • JTAG connector J30 VREF (pin2) and XMOD VIO (pin 6) connected to 3.3V. XMOD IO A, B, E, G connected to module MIO via level translator U8.
  • Pull-up for BOOTMODE and PS_SW (DIP switch S1), RST_IN_N and USR_BTN (front panel buttons S2, S3) changed from VCCIO18 to PS_1.8V; JTAG_EN connected to 3.3V via DIP switch (S1).
  • Added switch S4 for selecting of output voltage of DCDC U7 (VCC_HR_B, HR banks VCCO)
REV022018-12-0602a
  • Resistors R14 and R15 was replaced by 953R (was 5K1)
  • Resistor R5 was replaced by 5K1, R8 by 953R (was 9K09 and 1K69 respectively)
  • JTAG_EN connected to 3.3V via DIP switch (S1).
  • Added switch S4 for selecting of output voltage of DCDC U7 (VCC_HR_B, HR banks VCCO)
REV02
2016-05-2501-REV01


Hardware revision number can be found on the PCB board together with the module model number separated by the dash.

Scroll Title
anchorFigure_RV_HRN
titleBoard hardware revision number.


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1
diagramNameTEB0745_RV_HRN
simpleViewerfalse
width200
linksauto
tbstylehidden
diagramWidth129


Scroll Only

Image Added


Document Change History

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following

    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template

    • Metadata is only used of compatibility of older exports

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Technical Specificationss
DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse



Page info
infoTypeModified by
typeFlat
showVersionsfalse

  • Correction XMOD DIPs

2020-09-01v.135John Hartfiel
  • Correction power sequencing picture
2019-12-08v.134Pedram Babakhani
  • Technical Specifications
  • Update

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


...