Versions Compared

Old Version 13

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user Antti Lukats

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Template Revision 2.6

  • Module: TRM Name always "TE Series Name" +TRM
    Example: "TE0728 TRM"
  • Carrier: TRM Name usually "TEB Series Name" +TRM
    Example: "TEB0728 TRM"

...

Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable

  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables


      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefaultstyle
        widthssortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant across TRMs. A incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:

        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages

        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview

        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchorname>
    • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>


...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

...

The Trenz Electronic TEI0015 is an a commercial-grade module based on Intel® , low cost and small size module integrated with Intel® MAX 10. Intel   Intel MAX 10 devices are the ideal solution for system management, I/O expansion, communication control planes, industrial, automotive, and consumer applications.

Refer to http://trenz.org/tei0015-info for the current online version of this manual and other available documentation.

Page properties
hiddentrue
idComments

Notes :

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Intel® MAX 10 Commercial [10M08SAU169C8G]

    • Package: UBGA-169

      -UBGA

    • Speed Grade: C8 (Slowest)

    • Temperature:

       0°C ~ 85°C

       0°C to 85°C

    • Package compatible device 10M08...10M16 as assembly variant on request possible

  • SDRAM Memory up to

    64Mb, 166MHz

    32 Mbyte (8Mbyte default)

  • USB 2.0

    Dual High Speed USB to

    Multipurpose UART/FIFO IC

  • Quad SPI Flash, 64Mb

  • (FT2232H)

    • 4 Kbit EEPROM Memory for FTDI configuration data
    • Micro USB Receptacle (communication and power)

  • SPI Flash - NOT INSTALLED (only special option)

    EEPROM Memory, 4Kb

  • 8x User LED USB port
  • 18 Bit 2MSPS Analog to Digital Converter

  • 2x SMA Female Connector

  • I/O interface: 23x GPIO - Arduino MKR compatible

  • Power Supply:

    5V

    Others

  • Dimension: 86.5mm x 25mm

    Dimension

  • Others:

    • 86m x 25m

    • Instrumentation Amplifier

    • Voltage Feedback

    • Differential Amplifier

    • Operational Amplifier

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTExxxx TEI0015 block diagram


Scroll Ignore
draw.io Diagram
border
true
false
viewerToolbartrue
fitWindowfalse
diagramNameTEI0015_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
lboxtrue
diagramWidth
641
642
revision
3
27


Scroll Only

Image Modified


Main Components

Page properties
hiddentrue
idComments

Notes :

  • Picture of the PCB (top and bottom side) with labels of important components
  • Add List below


Note

For more information regarding how to add board photoes, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEI0015 main components


Scroll Ignore

draw.io Diagram
lbox
borderfalse
viewerToolbartrue
fitWindowfalsediagramDisplayNametrue
revision5
diagramNameTEI0015_OV_MC
simpleViewerfalse
widthlinksauto
tbstylehidden
lboxtrue
diagramWidth641
revision14


Scroll Only


  1. SMA Connector, J5...6

  2. Instrumentation

    Amplifier, U12 - U14 - U6

  3. Series

    Voltage Reference, U8

  4. Analog to Digital

    Convertor

    Converter, U15

    - U6

  5. Voltage Regulator, U10 - U13 - U16

  6. Buck

    Switching Voltage Regulator/LDO, U11 - U4

  7. SDRAM Memory, U2

  8. Intel® MAX 10 FPGA, U1SDRAM Memory, U2

  9. SPI Flash Memory, U5

  10. 12.00 MHz MEMS oscillator, U7

  11. FTDI USB2 to JTAG/UART adapter

    USP to UART convertor

    , U3

  12. User LEDs, D2...9

  13. 4Kb

    FTDI configuration EEPROM, U9

  14. Configuration/Status LED (Red) , D10

  15. Power-on LED (Green), D1

  16. Push button, S1

    Switch, S1

    ...2

  17. Micro USB

    port

    Connector, J9

  18. 1x14 pin header, J2 (Not assembled)

  19. 1x6 pin header, J4 (Not assembled)

  20. 1x4 Header, J3 (Not assembled)

  21. 1x14 pin header, J1 (Not assembled)

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

SDRAM

Storage device name

Content

Notes

Quad SPI Flash

N/A

Not

Programmed

populated

EEPROMNot

Programmed

FTDI configuration

Not Programmed


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.
Scroll Title
anchorTable_OV_BP
titleBoot process.
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE Signal State

Boot Mode

The FPGA configuration for Intel MAX 10 FPGAs can be stored through JTAG interface (using a *.POF file) on the FPGA itself since the Intel MAX 10 FPGA offers non-volatile configuration memory on chip. The FPGA configuration is loaded from the non-volatile memory when the board is powered up. To configure the FPGA directly, the JTAG interface can be used to configure the FPGA volatile (using a *.SOF file), means the configuration is lost after power off.

FPGA Reconfigration can be triggered by pressing push button S1.

I/O
Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2B
Push ButtonPin HeaderNote

RESET

S1J2Connected to nCONFIG


Signals, Interfaces and Pins

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

...

I/Os

...

on Pin Headers and Connectors

scroll

FPGA bank number and number of I/O signals connected to the B2B connector:

scroll-title
anchorTable_SIP_B2BGIOs
titleGeneral PL I/O Os to B2B Pin Headers and connectors information

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA Bank
B2B
Connector DesignatorI/O Signal CountVoltage LevelNotes

...

JTAG access to the TExxxx SoM through B2B connector JMX.

...

anchorTable_SIP_JTG
titleJTAG pins connection
Bank 1AJ173.3VAIN0...6
Bank 1BJ453.3VJTAG interface
Bank 2J143.3VDIO2...5
Bank 5J293.3VDIO6...14
J123.3VDIO0...1
Bank 8J213.3VRESET


FPGA I/O Banks

Page properties
hidden

...

JTAG Signal

...

B2B Connector

...

MIO Pins

Page properties
hiddentrue
idComments

you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic.

Example:

MIO PinConnected toB2BNotes
MIO12...14

SPI_CS , SPI_DQ0... SPI_DQ3

SPI_SCK

J2QSPI


...

Scroll Title
anchorTable_OBP_MIOsIOs
titleMIOs pins
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
MIO PinConnected toB2BNotes

...

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs
Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

anchorTable_OBP
titleOn board peripherals

...

Quad SPI Flash Memory

...

hiddentrue
idComments

Notes :

...

FPGA I/O Banks


FPGA BankI/O Signal CountConnected toNotes
Bank 1A71x14 Pin header, J1AIN0...6
1Jumper, J3AIN7
Bank 1B51x6 Pin header, J4JTAG_EN, TDI, TDO, TMS, TCK
Bank 2


41x14 Pin header, J1D2...5
5A2D, U15ADC_EN, ADC_SDI, ADC_SDO, ADC_SCK, ADC_CNV
112MHz Oscillator, U7CLK12M
2Amplifier, U12nIAMP_A0, nIAMP_A1
Bank 322SDRAM, U2RAM_ADDR_CMD
Bank 59

1x14 Pin header, J2

DIO6...14
21x14 Pin header, J1DIO0...1
1D12_RDIO12
Bank 616SDRAM, U2DQ0...15
2SDRAM, U2DQM0...1
1D11_RDIO11
Bank 8



8User Red LEDs, D2...9LED0...7
6SPI Flash, U5F_CS, F_CKL, F_DI, F_DO, nSTATUS, DEVCLRn
1Red LED, D10CONF_DONE
6FTDI JTAG/UART Adapter, U3BDBUS0...5
1Push Button, S2USER_BTN


Micro-USB Connector

The Micro-USB connector J9 provides an interface to access the FIFO/UART and JTAG functions via FTDI FT2232 chip. The use of this feature requires that FTDI USB drivers are installed on your host PC.

Scroll Title
anchorTable_OBP_USB
titleMicro USB-2 connector pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinsConnected toNote
VBUSUSB_VBUS
D+

FTDI FT2232H U3, DP pin


D-

FTDI FT2232H U3, DM pin



JTAG Interface

JTAG access to the TEI0015 SoM through pin header connector J4. This is normally not needed as there is on-board USB JTAG functionality.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

Pin Header Connector

Note
TMSJ4-6
TDIJ4-5
TDOJ4-4
TCK

J4-3


JTAG_ENJ4-2Pulled-up to 3.3V


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection


Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceDesignatorNotes
77530153U2
FTDI FT2232HU3JTAG/UART/FIFO
SPI FlashU5
77530153U9
OscillatorU712 MHz clock source
77530153U12, U14Analog to Digital Converter
Push ButtonsS1...2
8x User LEDsD2...9Red LEDs


SDRAM

TEI0015 is equipped with a Winbond 64 MBit (8 MByte) SDRAM chip in standard configuration, variants with 256 Mbit (32 MByte) memory density are also available. The SDRAM chip is connected to the FPGA bank 3 and 6 via 16-bit memory interface with 166MHz clock frequency and CL3 CAS latency.

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.


Scroll Title
anchorTable_OBP_SDRAM
titleSDRAM interface IOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SDRAM I/O Signals

Signal Schematic Name

Connected toNotes
Address inputs

A0 ... A13

bank 3-
Bank address inputs

BA0 / BA1

bank 3

-
Data input/output

DQ0 ... DQ15

bank 6

-
Data mask

DQM0 ... DQM1

bank 6

-
ClockCLKbank 3-
Control Signals

CS

bank 3

Chip select

CKE

bank 3

Clock enable

RAS

bank 3

Row Address Strobe

CAS

bank 3

Column Address Strobe

WEbank 3Write Enable


FTDI FT2232H

The FTDI chip U3 converts signals from USB2 to a variety of standard serial and parallel interfaces. Refer to the FTDI data sheet to get information about the features of the FT2232H chip. FTDI FT2232H chip channel A is used in MPPSE mode for JTAG. Channel B is configured to be used in async FIFO mode, this is default mode when using preprogrammed FTDI configuration. In this mode the communication from host PC looks like normal UART but from the FTDI side it is 8 bit FIFO style interface.

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

Scroll Title
anchorTable_OBP_SPIFTDI
titleQuad SPI interface MIOs FTDI chip interfaces and pins

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO
FTDI Chip U3 PinSignal Schematic
U?? Pin
NameConnected toNotes

...

anchorTable_OBP_RTC
titleI2C interface MIOs and pins
ADBUS0TCKFPGA bank 1B, pin G2JTAG interface
ADBUS1TDIFPGA bank 1B, pin F5
ADBUS2TDOFPGA bank 1B, pin F6
ADBUS3TMS

FPGA bank 1B, pin G1

BDBUS0BDBUS0FPGA bank 8, pin A4User configurable
BDBUS1BDBUS1FPGA bank 8, pin B4User configurable
BDBUS2BDBUS2FPGA bank 8, pin B5User configurable
BDBUS3BDBUS3FPGA bank 8, pin A6User configurable
BDBUS4BDBUS4FPGA bank 8, pin B6User configurable
BDBUS5BDBUS5FPGA bank 8, pin A7User configurable
BDBUS6BDBUS6FPGA bank 6, pin C11
BDBUS7BDBUS7FPGA bank 3, pin J7
BCBUS0BCBUS0FPGA bank 5, pin J9
BCBUS1BCBUS1FPGA bank 3, pin K5
BCBUS2BCBUS2FPGA bank 3, pin L4
BCBUS3BCBUS3FPGA bank 3, pin L5
BCBUS4BCBUS4FPGA bank 3, pin N12


SPI Flash

Optional SPI flash device maybe assembled in custom variants, normally it is not populated.

...

anchorTable_OBP_I2C_RTC
titleI2C Address for RTC

...

Notes

Scroll Title
anchorTable_OBP_EEPQSPI
titleI2C EEPROM interface MIOs and pinsQuad SPI Flash memory interface

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicU?? Pin
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal Schematic NameConnected toNotes
F_CSFPGA bank 8, pin B3Chip select
F_CLKFPGA bank 8, pin A3Clock
F_DIFPGA bank 8, pin A2Data in / out
nSTATUS

FPGA bank 8, pin C4

Data in / out, configuration dual-purpose pin of FPGA
DEVCLRNFPGA bank 8, pin B9Data in / out, configuration dual-purpose pin of FPGA
F_DOFPGA bank 8, pin B2Data in / out


EEPROM

The configuration of FTDI FT2232H chip is pre-programmed in the EEPROM U9.

Scroll Title
anchorTable_OBP_I2C_EEPROMEEP
titleI2C address for EEPROM interface MIOs and pins

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinI2C AddressDesignatorNotes

...

SchematicConnected toNotes

EECS

FTDI U3, Pin EECS
EECLKFTDI U3, Pin EECLK
EEDATAFTDI U3, Pin EEDATA


ADC

The TEI0015 board is equipped with the Analog Devices AD4003BCPZ-RL7 18-bit 2MSPS ADC.

Scroll Title
anchorTable_OBP_LEDA2D
titleOn-board LEDsA2D converter interface and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Schematic
Pins
Color
Connected to
Active Level
Notes
Note

DDR3 SDRAM

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TE???? SoM has ??? GByte volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: 
  • Supply voltage:
  • Speed: 
  • NOR Flash
  • Temperature: 

Ethernet

IN+

Diff Amplifier U14, VOUT-
IN-Diff Amplifier U14, VOUT+
SDIFPGA, bank 2, pin M2, ADC_SDI
SDOFPGA, bank 2, pin M1,  ADC_SDO
SCKFPGA, bank 2, pin N3,  ADC_SCK
CNVFPGA, bank 2, pin N2, ADC_CNV


LEDs

Scroll Title
anchorTable_OBP_ETHLED
titleEthernet PHY to Zynq SoC connectionsOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

BankSignal NameETH1ETH2Signal Description

...

cellHighlightingtrue

DesignatorColorConnected toActive LevelNote
D2...9RedLED1...8Active HighUser LEDs
D10RedCONF_DONEActive LowConfiguration DONE LED
D1Green3.3V Active HighAfter power on it will be on.


Push Bottuns

Reciever Output
Scroll Title
anchorTable_OBP_CANLED
titleCAN Tranciever interface MIOsOn-board Push Buttons

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toFunctionalityNote
S1RESETGeneral reset
S2USER_BTNUser push buttonConnected to FPGA Bank 8.
BankSchematicU?? PinNotes
D-TxDriver InputR-Rx