...
HTML |
---|
<!--
Template Revision 1.5 (for TEB0911 modified version)
--> |
Scroll Only (inline) |
---|
Online version of this manual and other related documents can be found at https://wiki.trenz-electronic.de/display/PD/SC-CPLD-Firmware |
Scroll pdf ignore |
---|
Table of contents |
...
- Power Management
- Reset Management
- Boot Mode
- FAN Control
- LED Control
- FMC JTAG
- CAN
- PJTAG
Firmware Revision and supported PCB Revision
...
Product Specification
Port Description
Name / opt. VHD Name | Direction | Pin | Bank Power | Description | Schematic Sheet | PCB < REV03 |
---|
3V3SB |
B163.3V | CPLD Programm Pin connected with pullup | SC1 |
|
3V3SB |
B203.3V | CPLD initn Pin connected with pullup | SC1 |
|
3V3SB |
C293.3V | CPLD Done Pin connected with pullup | SC1 |
|
A_LA06_SC_N |
| C22 | / currently_not_used | SC2 |
|
A_LA06_SC_P |
| B22 | / currently_not_used | SC2 |
|
A_LA07_SC_N |
| F20 | / currently_not_used | SC2 |
|
A_LA07_SC_P |
| E22 | / currently_not_used | SC2 |
|
A_LA08_SC_N |
| E21 | / currently_not_used | SC2 |
|
A_LA08_SC_P |
| D22 | / currently_not_used | SC2 |
|
A_LA09_SC_N |
FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA09_SC_P |
| G21 | / currently_not_used | SC2 |
|
A_LA10_SC_N |
| G17 | / currently_not_used | SC2 |
|
A_LA10_SC_P |
| H16 | / currently_not_used | SC2 |
|
A_LA11_SC_N |
| K22 | / currently_not_used | SC2 |
|
A_LA11_SC_P |
| K21 | / currently_not_used | SC2 |
|
A_LA12_SC_N |
| H20 | / currently_not_used | SC2 |
|
A_LA12_SC_P |
| H21 | / currently_not_used | SC2 |
|
A_LA13_SC_N |
| L22 | / currently_not_used | SC2 |
|
A_LA13_SC_P |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA14_SC_N |
| G16 | / currently_not_used | SC2 |
|
A_LA14_SC_P |
| F18 | / currently_not_used | SC2 |
|
A_LA15_SC_N |
| D19 | / currently_not_used | SC2 |
|
A_LA15_SC_P |
| C21 | / currently_not_used | SC2 |
|
A_LA16_SC_N |
| M21 | / currently_not_used | SC2 |
|
A_LA16_SC_P |
| M22 | / currently_not_used | SC2 |
|
A_LA17_SC_N |
| N21 | / currently_not_used | SC2 |
|
A_LA17_SC_P |
| N22 | / currently_not_used | SC2 |
|
A_LA18_SC_N |
/FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA18_SC_P |
| F19 | / currently_not_used | SC2 |
|
A_LA19_SC_N |
| E19 | / currently_not_used | SC2 |
|
A_LA19_SC_P |
| D20 | / currently_not_used | SC2 |
|
A_LA20_SC_N |
| E20 | / currently_not_used | SC2 |
|
A_LA20_SC_P |
| D21 | / currently_not_used | SC2 |
|
A_LA21_SC_N |
| J17 | / currently_not_used | SC2 |
|
A_LA21_SC_P |
| J16 | / currently_not_used | SC2 |
|
A_LA22_SC_N |
| J19 | / currently_not_used | SC2 |
|
A_LA22_SC_P |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA23_SC_N |
| G18 | / currently_not_used | SC2 |
|
A_LA23_SC_P |
| H17 | / currently_not_used | SC2 |
|
A_LA24_SC_N |
| R22 | / currently_not_used | SC2 |
|
A_LA24_SC_P |
| P20 | / currently_not_used | SC2 |
|
A_LA25_SC_N |
| K16 | / currently_not_used | SC2 |
|
A_LA25_SC_P |
| K17 | / currently_not_used | SC2 |
|
A_LA26_SC_N |
| K18 | / currently_not_used | SC2 |
|
A_LA26_SC_P |
| L20 | / currently_not_used | SC2 |
|
A_LA27_SC_N |
/FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA27_SC_P |
| J21 | / currently_not_used | SC2 |
|
A_LA28_SC_N |
| U22 | / currently_not_used | SC2 |
|
A_LA28_SC_P |
| T20 | / currently_not_used | SC2 |
|
A_LA29_SC_N |
| T22 | / currently_not_used | SC2 |
|
A_LA29_SC_P |
| T21 | / currently_not_used | SC2 |
|
A_LA30_SC_N |
| W22 | / currently_not_used | SC2 |
|
A_LA30_SC_P |
| V21 | / currently_not_used | SC2 |
|
A_LA31_SC_N |
| V22 | / currently_not_used | SC2 |
|
A_LA31_SC_P |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
A_LA32_SC_N |
| Y20 | / currently_not_used | SC2 |
|
A_LA32_SC_P |
| Y21 | / currently_not_used | SC2 |
|
A_LA33_SC_N |
| AA22 | / currently_not_used | SC2 |
|
A_LA33_SC_P |
| Y22 | / currently_not_used | SC2 |
|
B64_T1 | out | D3 | 1.8V | reserved for RGPIO / currently_not_implemented | SC2 |
|
B64_T2 | in | C3 | 1.8V | reserved for RGPIO / currently_not_implemented | SC2 |
|
B64_T3 | in | B1 | 1.8V | reserved for RGPIO / currently_not_implemented | SC2 |
|
B65_T1 |
/ currently_not_used | 1.8V | CAN_S (with pulldown) | SC2 |
|
B65_T2 |
/ currently_not_used C11.8V | / currently_not_used | SC2 |
|
B66_T1 | in | D1 | 1.8V | FPGA / dp_aux_data_out | SC2 |
|
B66_T2 | in | F4 | 1.8V | FPGA / dp_aux_data_oe_n | SC2 |
|
B66_T3 | out | F3 | 1.8V | FPGA / dp_aux_data_ | SC2 |
|
B67_T1 | out | F1 | 1.8V | FPGA / dp_hot_plug_detect | SC2 |
|
B67_T2 | in | G3 | 1.8V | FPGA / LED | SC2 |
|
B67_T3 | in | H4 | 1.8V | FPGA / LED | SC2 |
|
C_TCK | in | A8 | 3.3V | JTAG CPLD XMOD | SC1 |
|
C_TDI | in | C7 | 3.3V | JTAG CPLD XMOD | SC1 |
|
C_TDO | out | A6 | 3.3V | JTAG CPLD XMOD | SC1 |
|
C_TMS | int | C9 | 3.3V | JTAG CPLD XMOD | SC1 |
|
CAN_FAULT |
currently_not_used / currently_not_used currently_not_used / currently_not_used3.3V | CAN / MIO35 | SC1 |
|
CLK_SC | in | AA9 | 3.3V | external User CLK 25MHz (oscillator is assembly option) | SC1 |
|
DDR_EN | out | C6 | 3.3V | Power 7A | SC1 |
|
DDR_PG | in | B8 | 3.3V | Power 7A | SC1 |
|
DONE | in | G4 | 1.8V | PS Config | SC2 |
|
DP_AUX_DE | out | AB13 | 3.3V | DP | SC1 |
|
DP_AUX_RX | in | AB12 | 3.3V | DP | SC1 |
|
DP_AUX_TX | out | AA14 | 3.3V | DP | SC1 |
|
DP_EN | out | M4 | 1.8V | Power 8 | SC2 |
|
DP_TX_HPD | in | AA15 | 3.3V | DP | SC1 |
|
EN_12V | out | C10 | 3.3V | Power 1 | SC1 |
|
EN_3.3V / EN_3P3V | out | Y8 | 3.3V | Power 2 | SC1 |
|
EN_A_3V3 | out | Y18 | 3.3V | Power 8 FMC | SC1 |
|
EN_AF_1V8 | out | W19 | 3.3V | Power 8 FMC | SC1 |
|
EN_B_3V3 | out | G11 | 3.3V | Power 8 FMC | SC1 |
|
EN_BC_1V8 | out | A3 | 3.3V | Power 8 FMC | SC1 |
|
EN_C_3V3 | out | E11 | 3.3V | Power 8 FMC | SC1 |
|
EN_D_3V3 | out | F8 | 3.3V | Power 8 FMC | SC1 |
|
EN_DE_1V8 | out | C5 | 3.3V | Power 8 FMC | SC1 |
|
EN_E_3V3 | out | E8 | 3.3V | Power 8 FMC | SC1 |
|
EN_F_3V3 | out | Y10 | 3.3V | Power 8 FMC | SC1 |
|
EN_GT_L | out | A7 | 3.3V | Power 4B,C | SC1 |
|
EN_GT_R | out | B7 |
Power 3.3V | Power 4B,C | SC1 |
|
EN_SFP_SSD | out | W8 | 3.3V | Power 8 | SC1 |
|
EN_VCCINT | out | B9 | 3.3V | Power 1 | SC1 |
|
ERR_OUT | in | H1 | 1.8V | PS Config | SC2 |
|
ERR_STATUS | in | J2 | 1.8V | PS Config | SC2 |
|
ETH_RST | out | L6 | 1.8V | Reset | SC2 |
|
F_LA06_SC_N |
| M19 | / currently_not_used | SC2 |
|
F_LA06_SC_P |
| M18 | / currently_not_used | SC2 |
|
F_LA07_SC_N |
| P21 | / currently_not_used | SC2 |
|
F_LA07_SC_P |
| N20 | / currently_not_used | SC2 |
|
F_LA08_SC_N |
| N18 | / currently_not_used | SC2 |
|
F_LA08_SC_P |
| M20 | / currently_not_used | SC2 |
|
F_LA09_SC_N |
| R18 | / currently_not_used | SC2 |
|
F_LA09_SC_P |
|
| R19 | FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA10_SC_N |
| R20 | / currently_not_used | SC2 |
|
F_LA10_SC_P |
| R21 | / currently_not_used | SC2 |
|
F_LA11_SC_N |
| U19 | / currently_not_used | SC2 |
|
F_LA11_SC_P |
| T19 | / currently_not_used | SC2 |
|
F_LA12_SC_N |
| P18 | / currently_not_used | SC2 |
|
F_LA12_SC_P |
| P19 | / currently_not_used | SC2 |
|
F_LA13_SC_N |
| U17 | / currently_not_used | SC2 |
|
F_LA13_SC_P |
| U18 | / currently_not_used | SC2 |
|
F_LA14_SC_N |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA14_SC_P |
| T18 | / currently_not_used | SC2 |
|
F_LA15_SC_N |
| R16 | / currently_not_used | SC2 |
|
F_LA15_SC_P |
| T17 | / currently_not_used | SC2 |
|
F_LA16_SC_N |
| V19 | / currently_not_used | SC2 |
|
F_LA16_SC_P |
| W20 | / currently_not_used | SC2 |
|
F_LA17_SC_N |
| N16 | / currently_not_used | SC2 |
|
F_LA17_SC_P |
| N17 | / currently_not_used | SC2 |
|
F_LA18_SC_N |
| L16 | / currently_not_used | SC2 |
|
F_LA18_SC_P |
/FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA19_SC_N |
| M16 | / currently_not_used | SC2 |
|
F_LA19_SC_P |
| M17 | / currently_not_used | SC2 |
|
F_LA20_SC_N |
| N6 | / currently_not_used | SC2 |
|
F_LA20_SC_P |
| N7 | / currently_not_used | SC2 |
|
F_LA21_SC_N |
| T6 | / currently_not_used | SC2 |
|
F_LA21_SC_P |
| R7 | / currently_not_used | SC2 |
|
F_LA22_SC_N |
| T5 | / currently_not_used | SC2 |
|
F_LA22_SC_P |
| R6 | / currently_not_used | SC2 |
|
F_LA23_SC_N |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA23_SC_P |
| P7 | / currently_not_used | SC2 |
|
F_LA24_SC_N |
| W3 | / currently_not_used | SC2 |
|
F_LA24_SC_P |
| V4 | / currently_not_used | SC2 |
|
F_LA25_SC_N |
| Y2 | / currently_not_used | SC2 |
|
F_LA25_SC_P |
| W4 | / currently_not_used | SC2 |
|
F_LA26_SC_N |
| U4 | / currently_not_used | SC2 |
|
F_LA26_SC_P |
| T4 | / currently_not_used | SC2 |
|
F_LA27_SC_N |
| U5 | / currently_not_used | SC2 |
|
F_LA27_SC_P |
/FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA28_SC_N |
| V2 | / currently_not_used | SC2 |
|
F_LA28_SC_P |
| W1 | / currently_not_used | SC2 |
|
F_LA29_SC_N |
| AA1 | / currently_not_used | SC2 |
|
F_LA29_SC_P |
| Y1 | / currently_not_used | SC2 |
|
F_LA30_SC_N |
| V1 | / currently_not_used | SC2 |
|
F_LA30_SC_P |
| U3 | / currently_not_used | SC2 |
|
F_LA31_SC_N |
| V3 | / currently_not_used | SC2 |
|
F_LA31_SC_P |
| W2 | / currently_not_used | SC2 |
|
F_LA32_SC_N |
/ currently_FMC_AF_1.8V | / currently_not_used | SC2 |
|
F_LA32_SC_P |
| N5 | / currently_not_used | SC2 |
|
F_LA33_SC_N |
| R2 | / currently_not_used | SC2 |
|
F_LA33_SC_P |
| R3 | / currently_not_used | SC2 |
|
F1_EN | out | C8 | 3.3V | FAN | SC1 |
|
F1PWM | out | E10 | 3.3V | FAN | SC1 |
|
F1SENSE | in | D11 | 3.3V | FAN | SC1 |
|
F2_EN | out | B4 | 3.3V | FAN | SC1 |
|
F2PWM | out | D9 | 3.3V | FAN | SC1 |
|
F2SENSE | in | G12 | 3.3V | FAN | SC1 |
|
F3_EN | out | A12 | 3.3V | FAN | SC1 |
|
F3PWM | out | B13 | 3.3V | FAN | SC1 |
|
F3SENSE | in | A13 | 3.3V | FAN | SC1 |
|
FAN_A_EN | out | Y19 | 3.3V | FAN | SC1 |
|
FAN_B_EN | out | A2 | 3.3V | FAN | SC1 |
|
FAN_C_EN | out | B3 | 3.3V | FAN | SC1 |
|
FAN_D_EN | out | D7 | 3.3V | FAN | SC1 |
|
FAN_E_EN | out | D6 | 3.3V | FAN | SC1 |
|
FAN_F_EN | out | W18 | 3.3V | FAN | SC1 |
|
FMC12V_EN | out | AA8 | 3.3V | Power 8 FMC | SC1 |
|
FMCA_PG_C2M | inout | E16 | 3.3V | Power 8 FMC | SC1 |
|
FMCA_PG_M2C | in | F17 | 3.3V | Power 8 FMC | SC1 |
|
FMCA_PRSNT | in | F16 | 3.3V | Power 8 FMC | SC1 |
|
FMCA_TCK | out | T16 | 3.3V | JTAG | SC1 |
|
FMCA_TDI | out | U15 | 3.3V | JTAG | SC1 |
|
FMCA_TDO | in | U16 | 3.3V | JTAG | SC1 |
|
FMCA_TMS | out | V17 | 3.3V | JTAG | SC1 |
|
FMCAF_12V_PG | in | W9 | 3.3V | Power 8 FMC | SC1 |
|
FMCB_PG_C2M | inout | C4 | 3.3V | Power 8 FMC | SC1 |
|
FMCB_PG_M2C | in | D5 | 3.3V | Power 8 FMC | SC1 |
|
FMCB_PRSNT | in | D4 | 3.3V | Power 8 FMC | SC1 |
|
FMCB_TCK | out | E6 | 3.3V | JTAG | SC1 |
|
FMCB_TDI | out | D8 | 3.3V | JTAG | SC1 |
|
FMCB_TDO | in | E9 | 3.3V | JTAG | SC1 |
|
FMCB_TMS | out | F10 | 3.3V | JTAG | SC1 |
|
FMCC_PG_C2M | inout | U6 | 3.3V | Power 8 FMC | SC1 |
|
FMCC_PG_M2C | in | V6 | 3.3V | Power 8 FMC | SC1 |
|
FMCC_PRSNT | in | W5 | 3.3V | Power 8 FMC | SC1 |
|
FMCC_TCK | out | W6 | 3.3V | JTAG | SC1 |
|
FMCC_TDI | out | Y4 | 3.3V | JTAG | SC1 |
|
FMCC_TDO | in | Y5 | 3.3V | JTAG | SC1 |
|
FMCC_TMS | out | AA3 | 3.3V | JTAG | SC1 |
|
FMCD_PG_C2M | inout | G8 | 3.3V | Power 8 FMC | SC1 |
|
FMCD_PG_M2C | in | G10 | 3.3V | Power 8 FMC | SC1 |
|
FMCD_PRSNT | in | AA4 | 3.3V | Power 8 FMC | SC1 |
|
FMCD_TCK | out | T12 | 3.3V | JTAG | SC1 |
|
FMCD_TDI | out | U8 | 3.3V | JTAG | SC1 |
|
FMCD_TDO | in | V9 | 3.3V | JTAG | SC1 |
|
FMCD_TMS | out | U10 | 3.3V | JTAG | SC1 |
|
FMCE_PG_C2M | inout | AB3 | 3.3V | Power 8 FMC | SC1 |
|
FMCE_PG_M2C | in | AB2 | 3.3V | Power 8 FMC | SC1 |
|
FMCE_PRSNT | in | AB5 | 3.3V | Power 8 FMC | SC1 |
|
FMCE_TCK | out | Y6 | 3.3V | JTAG | SC1 |
|
FMCE_TDI | out | AB6 | 3.3V | JTAG | SC1 |
|
FMCE_TDO | in | AA7 | 3.3V | JTAG | SC1 |
|
FMCE_TMS | out | AB7 | 3.3V | JTAG | SC1 |
|
FMCF_PG_C2M | inout | AB20 | 3.3V | Power 8 FMC | SC1 |
|
FMCF_PG_M2C | in | AB21 | 3.3V | Power 8 FMC | SC1 |
|
FMCF_PRSNT | in | AA19 | 3.3V | Power 8 FMC | SC1 |
|
FMCF_TCK | out | W11 | 3.3V | JTAG | SC1 |
|
FMCF_TDI | out | V11 | 3.3V | JTAG | SC1 |
|
FMCF_TDO | in | AB10 | 3.3V | JTAG | SC1 |
|
FMCF_TMS | out | AA10 | 3.3V | JTAG | SC1 |
|
I2C_RST | out | L2 | 1.8V | Reset | SC2 |
|
INIT_B | in | J3 | 1.8V | PS Config | SC2 |
|
JTAGENB | in | A16 | 3.3V | JTAG / Enable to get access to CPLD over JTAG. Pin is not accessible on CPLD. Is set by DIP-Switch S3-2 | SC1 |
|
LED_1A |
/ currently_not_used | 3.3V | ETH LED yellow (right connector LED) | SC1 |
|
LED_2A |
/ currently_not_used | 3.3V | ETH LED green (left connector LED) (LED_2A high LED_2B low) | SC1 |
|
LED_2B |
/ currently_not_used | 3.3V | ETH LED orange (left connector LED) (LED_2B high LED_2A low) | SC1 |
|
LED1 | out | U12 | 3.3V | USR (D13 green) | SC1 |
|
LED2 | out | V12 | 3.3V | USR (D14 green) | SC1 |
|
LED3 | out | W12 | 3.3V | USR (D15 green) | SC1 |
|
LED4 | out | V13 | 3.3V | USR (D16 red) | SC1 |
|
MEM_SCL | in | W16 |
I2C3.3V | I2C | SC1 |
|
MEM_SDA | inout | V16 | 3.3V | I2C | SC1 |
|
MIO24 |
F51.8V | MIO / currently_not_used | SC2 |
|
MIO25 |
G51.8V | MIO / currently_not_used | SC2 |
|
MIO26 | out | G15 | 3.3V | MIO / PJTAG TCK | SC1 |
|
MIO27 | out | E12 | 3.3V | MIO / PJTAG TDI | SC1 |
|
MIO28 | in | E15 | 3.3V | MIO / PJTAG TDO | SC1 |
|
MIO29 | out | C11 | 3.3V | MIO / PJTAG TMS | SC1 |
|
MIO30 |
/ currently_not_used in | B12 | 3.3V | MIO / currently_not_used | SC1 |
|
MIO32 |
B113.3V | MIO / currently_not_used | SC1 |
|
MIO33 | in | U7 | 3.3V | MIO / PCIe Reset | SC1 |
|
MIO34 |
/ currently_not_used MIO / currently_not_used | G73.3V | MIO / currently_not_used | SC1 |
|
MIO37 |
D143.3V | MIO / currently_not_used | SC1 |
|
MIO40 |
F123.3V | MIO / currently_not_used | SC1 |
|
MIO41 |
T83.3V | MIO / currently_not_used | SC1 |
|
MIO42 | out | B14 | 3.3V | MIO / UART RX | SC1 |
|
MIO43 | in | E7 | 3.3V | MIO / UART TX | SC1 |
|
MIO44 | out | E14 | 3.3V | MIO / SD-WP | SC1 |
|
MIO45 | out | A20 | 3.3V | MIO / SD-CP | SC1 |
|
MIO6 | in | F6 | 1.8V | MIO / QSPI FB CLK from ZynqMP | SC2 |
|
MODE0 | out | H3 | 1.8V | PS Config Boot Mode | SC2 |
|
MODE1 | out | H2 | 1.8V | PS Config Boot Mode | SC2 |
|
MODE2 | out | G2 | 1.8V | PS Config Boot Mode | SC2 |
|
MODE3 | out | G1 | 1.8V | PS Config Boot Mode | SC2 |
|
MR | out | L7 | 1.8V | PS Config (PS_POR_B) Reset | SC2 |
|
NC | out | AA20 | 3.3V | used as dummi output pin / Not connected | SC1 |
|
NC |
T15 W17 V15 W15 V14 W14 U13 T13 AB16 Y3 A21SC1 G6 N1 N2 M1 N3 P2 M7 M6 P3 R1 M5 H5 J5 J4 | K5 | Not connected | SC2 | NC | | L3 | Not connected | SC2 |
|
PG_12V | in | A11 | 3.3V | Power 1 | SC1 |
|
PG_FPD | in | A10 | 3.3V | Power 2 | SC1 |
|
PG_GT_L | in | K3 | 1.8V | Power 5BC | SC2 |
|
PG_GT_R | in | F11 | 3.3V | Power 5BC | SC1 |
|
PG_PSGT | in | A5 | 3.3V | Power 6A | SC1 |
|
PHY_CLK125M | in | K2 | 1.8V | CLK | SC2 |
|
PHY_LED0 |
/ currently_not_used / currently_not_used in | K1 | 1.8V | / currently_not_used | SC2 |
|
PLL_RST | out | L4 | 1.8V | Reset | SC2 |
|
PROG_B | out | E2 | 1.8V | PS Config (opt. PL Reset) | SC2 |
|
PSGT_EN | out | B10 | 3.3V | Power 4A | SC1 |
|
SC_SW1 | in | E17 | 3.3V | USR S3-3 / Set Boot Mode | SC1 |
|
SC_SW2 | in | D16 | 3.3V | USR S3-4 / Set Boot Mode | SC1 |
|
SD_CD | in | T11 | 3.3V | SD CD | SC1 |
|
SD_EN | out | U11 | 3.3V | Power 8 | SC1 |
|
SD_WP | in | T10 | 3.3V | SD WP | SC1 |
|
SFP_LED1 |
AB173.3V | / currently_not_used | SC1 |
|
SFP_LED2 |
AB183.3V | / currently_not_used | SC1 |
|
SFP_LED3 |
AA163.3V | / currently_not_used | SC1 |
|
SFP_LED4 |
AB153.3V | / currently_not_used | SC1 |
|
SFP0_LOS |
V83.3V | / currently_not_used | SC1 |
|
SFP0_TX_DIS | out | Y7 | 3.3V | SFP | SC1 |
|
SFP1_LOS |
W73.3V | / currently_not_used | SC1 |
|
SFP1_TX_DIS |
V7 1.8V | / currently_not_used | SC2 |
|
SSD1_LED |
AA133.3V | / currently_not_used | SC1 |
|
SSD1_PERSTN | out | AA11 | 3.3V | SSD Reset | SC1 |
|
SSD1_SLEEP |
AA123.3V | / currently_not_used | SC1 |
|
SSD1_WAKE | out | AB11 | 3.3V | SSD | SC1 |
|
U_SW1 | in | D18 | 3.3V | USR (S4-1) / currently_not_used | SC1 |
|
U_SW2 | in | D17 | 3.3V | USR (S4-2) / currently_not_used | SC1 |
|
U_SW3 | in | C19 | 3.3V | USR (S4-3)/ currently_not_used | SC1 |
|
U_SW4 | in | C18 | 3.3V | USR (S4-4) / currently_not_used | SC1 |
|
USB0_RST | out | M2 | 1.8V | Reset | SC2 |
|
USBH_MODE0 | out | Y17 | 3.3V | USB | SC1 |
|
USBH_MODE1 | out | Y16 | 3.3V | USB | SC1 |
|
USBH_RST | out | Y15 | 3.3V | Reset | SC1 |
|
USR_BUT1 | in | F13 | 3.3V | USR (S1) | SC1 |
|
USR_BUT2 | in | G13 | 3.3V | USR (S2) / Power Reset | SC1 |
XMOD1A B19 | XMOD J35 / currently_not_used | SC1 | 3.3V | USR (S3) / optional Power Reset | SC1 | N.C. on PCB REV02,REV03 |
XMOD1_A |
| B19 | 3.3V | XMOD J35 / currently_not_used | SC1 |
|
XMOD1_ |
XMOD1_B | out | A17 | 3.3V | XMOD J35 LED / Attention this is connected to XMOD1_E | SC1 |
|
XMOD1_E |
C173.3V | XMOD J35 / Attention this is connected to XMOD1_B / currently_not_used | SC1 |
|
XMOD1_G | in | A18 | 3.3V | XMOD J35 Button | SC1 |
|
XMOD2_A | out | K7 | 1.8V | UART RXD (XMOD J24) | SC2 |
|
XMOD2_B | in | K6 | 1.8V | UART TX (XMOD J24) | SC2 |
|
XMOD2_E | out | H7 | 1.8V | XMOD J24 LED / Boot Mode | SC2 |
|
XMOD2_G | in | H6 | 1.8V | XMOD J24 Button / PS Reset | SC2 |
...
Functional Description
JTAG
...
Set DIP-Switch S3-2 to ON to get CPLD into JTAG Chain. This is only needed for CPLD update. Otherwise JTAG is routed thought FMCs or to PJTAG dependign on boot mode. JTAG is connected into cascade from FMC A to F, if module is detected, otherwise corresponding connector is left out.
Boot Mode | Description |
---|
PJTAG0 | PJTAG MIOs are connected to JTAG chain |
all other | FMC IOs are connected to JTAG chain |
Note: FPGA/SoC JTAG access is available directly over second XMOD.
...
Power is controlled by different state machines and can be restart over S2 Button or S3 Button (PCB REV04 only). Main Power sequence must be finished successfully before other power management units starts. Power Management can be checked over status LEDs, see LED section.
...
FMCF_PB_C2M, FMCC_PG_C2M, FMCD_PG_C2M, FMCE_PG_C2M are bidirectional. External Pull up is used to check power fails. 12V is sourced and controlled by main power.
Reset
Button | Description |
---|
S2 | Main Power Reset Button. Restart power management. |
FPGA XMOD | PS MR Reset Button. Restart PS (PS_POR_B) |
...
S3-3 (SC_SW1) | S3-4 (SC_SW2) | Description |
---|
OFF | OFF | SD1 Boot Mode (SD-Card on J11), if SD is insered |
OFF | OFF | eMMC Boot Mode, if SD is not insered |
OFF | ON | PJTAG0 |
ON | OFF | QSPI32 |
ON | ON | JTAG |
...
Display Port
Output | Input |
---|
DP_AUX_TX | B66_T1 |
DP_AUX_DE | not B66_T2 |
B66_T3 | DP_AUX_RX |
B67_T1 | DP_TX_HPD |
CAN
- CAN_S soured by B65_T1
- CAN_FAULT is connected to B65_T2
- CAN_RX is connected to MIO34
- CAN_TX sourced by MIO35
SD
- SD_EN is controlled by power management.
- SD_CD is connected to MIO45.
- SD_WP is connected to MIO44.
SFP
- Transmit for all SFP is enabled.
USB
- USB Mode pins constant "11" (default boot mode).
- USB0_RST is controlled by power management.
- USBH_RST is controlled by power management.
SSD
- SSD1_WAKE is "0".
- SSD1_PERSTn is controlled by power management and MIO33.
I2C
- I2C_RST is controlled by power management.
FAN
FAN1 to FAN3 speed can be controlled via I2C Bus. FMC FANs can be disabled over I2C Bus and only run, if FMCx_PRESNT is available.
...
Register Address | Name | Description |
---|
0 | FAN CTRL | Enable FAN, Bit 0-2 Fan1 to Fan2, Bit 3 FMC A and FB, Bit 4 FMC B and C , Bit 5 FMC D and , Bit 6 FMC E, Bit 7 FMC A and F. Default all enabled (1) |
1 | FAN1 PWM | FAN1 PWM (0%-100%, Default 30%) |
2 | FAN2 PWM | FAN2 PWM (0%-100%, Default 30%) |
3 | FAN3 PWM | FAN3 PWM (0%-100%, Default 30%) |
...
Register Address | Name | Description |
---|
0 | FAN CTRL | FAN Control register |
1 | FAN1 RPS | FAN1 Revolutions per second |
2 | FAN2 RPS | FAN2 Revolutions per second |
3 | FAN3 RPS | FAN3 Revolutions per second |
...
FMC
FMC present (FMCx_PRESNT) signals are used for board detect and enables.
FMC JTAG: See JTAG section
FAN : See FAN section
UART
UART is connected to FPGA XMOOD on J24. XMOD UART RXD output is connected to MIO42. MIO43 is connected to XMOD UART TX input.
...
LED | Description |
---|
LED4 (D16 red) | User FPGA IO B67_T3 |
LED3 (D15 green) | User FPGA IO B67_T2 |
LED2 (D14 green) | PS Status. Status depends on blink sequence and priority. - ******** : Reset button is pressed
- *****ooo : Init_B failed
- ****oooo : PS_Error_Status and PS_Error failed
- ***ooooo : PS_Error_Status failed
- **oooooo : PS_Error failed
- *ooooooo : Done is low-> SoC PL not programmed
- LED OFF or ON : All ready → user defined from FPGA IOMIO30
|
LED4 (D13 green) | Power LED. Status depends on blink sequence and priority.- LED ON OFF: Power button is pressed (Note, 1 and 8 are swapped with CPLD REV03)
- ******** : Main power up failed
- *****ooo : Main power error after successfully startup
- *****ooo : MGT or Periphery power up failed
- ***ooooo : MGT or Periphery power error after successfully startup
- **oooooo : FMC power up failed
- *ooooooo : FMC power error after successfully startup
- LED OFF ON: Power good (Note, 1 and 8 are swapped with CPLD REV03)
|
FPGA XMOD (J24-XMOD2) | Boot Mode. Status depends on blink sequence and priority. - LED ON : JTAG
- ******** : Error unknown state
- *****ooo : not used
- *****ooo : not used
- ***ooooo : not used
- **oooooo : QSPI
- *ooooooo : PJTAG_0
- LED OFF : SD1
|
CPLD XMOD (J35-XMOD1) | User FPGA IO |
Appx. A: Change History and Legal Notices
Revision Changes
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
HTML |
---|
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview, CPLD/PCB(or update)to the empty row
3.Update Metadate =Page Information Macro Preview+1
--> |
- ******** : one or more of FMCx_PG_M2C of connected FMC are not ready
- LED OFF : all connected FMCx_PG_M2C are ready
|
ETH LED Left (Green/Orange) | OFF, if Main Power Failed otherwise PHY_LED0(depends on PHY Configuration) - Green, if FAN1...3 enabled and FMC FAN with connected modules are enabled
- Orange, if one of FAN1..3 or FMC FAN wirg connected modules are disabled
|
ETH LED Right (Yellow) | OFF, if Main Power Failed otherwise PHY_LED1(depends on PHY Configuration) |
Appx. A: Change History and Legal Notices
Revision Changes
CPLD REV04 to REV05
add can
DP_TX_HPD input pin threshold changed
CPLD REV03 to REV04
- bugfix FMC JTAG (support multiple device in the chain now)
CPLD REV02 to REV03
- add main Reset to optional User Button 3 (only on PCB REV04 usable)
- add PHY LEDs
- add emmC Boot Mode
- new I2C controller
- swapped LED1 0,7 state (LED ON is ready now)
CPLD REV01 to REV02
Correction of FAN_A_EN and FAN_AF_EN Location constrains
Add Pullup attribute to FMCX_PRSNT signals
I2C Enable mapping is changed
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
HTML |
---|
<!--
Generate new entry:
1:add new row below first
2:Copy Page Information Macro(date+user) Preview, Page Information Macro Preview, CPLD/PCB(or update)to the empty row
3.Update Metadate =Page Information Macro Preview+1
--> |
Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description |
---|
Page info |
---|
| modified-date |
---|
| modified-date |
---|
dateFormat | yyyy-MM-dd |
---|
|
| Page info |
---|
| current-version |
---|
| current-version |
---|
prefix | v. |
---|
|
| REV05 | REV02, REV03, REV04 | Page info |
---|
| modified-user |
---|
| modified-user |
---|
|
| - firmware update
- released at 2019-09-10
|
2018-12-10 | v.29 | REV04 | REV02, REV03, REV04 | John Hartfiel | - firmware update
- released at 2018-12-06
|
| v.28 | REV03 | REV02, REV03, REV04 | John Hartfiel | - firmware update
- released at 2018-11-19
|
| v.24 | REV02 | REV02, REV03 | John Hartfiel | |
2017-09-18 | v.23 | REV02 | REV02 | John Hartfiel | |
2017-08-16 | v.21 | REV01 | REV02 | John Hartfiel | |
Date | Document Revision | CPLD Firmware Revision | Supported PCB Revision | Authors | Description |
---|
Page info |
---|
modified-date | modified-date |
dateFormat | yyyy-MM-dd |
---|
Page info |
---|
current-version | current-version | prefix | v. |
---|
REV01 | REV02 | Page info |
---|
modified-user | modified-user | Work in progress | 2017-07-25 | v.1 | REV01 | REV02 | | |
| All | | |
|
| Page info |
---|
| modified-users |
---|
| modified-users |
---|
|
|
|
Legal Notices
Include Page |
---|
| IN:Legal Notices |
---|
| IN:Legal Notices |
---|
|