Page History

Template Revision 2.6 - on construction

...

HTML

<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>

...

hidden	true
id	Comments

Important General Note:

...

Export PDF to download, if vivado revision is changed!

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

...

Figure template (note: inner scroll ignore/only only with drawIO object):

...

anchor	Figure_xyz
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, use

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Table template:

Layout macro can be use for landscape of large tables
Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)

...

anchor	Table_xyz
title	Text

...

Scroll pdf ignore

Overview

Page properties

hidden	true
id	Comments

Notes :

short description of the design
Short Link of "Scroll only" macro:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info
- List of available short links: https://wiki.trenz-electronic.de/display/CON/Redirects

Linux with basic periphery of TE0808 Starterkit (TEBF0808 Carrier).

Refer to http://trenz.org/te0803-info for the current online version of this manual and other available documentation.

Key Features

Page properties

hidden	true
id	Comments

Notes :

Add basic key futures, which can be tested with the design

Excerpt
Vivado 2018.3 TEBF0808 Linux USB ETH MAC from EEPROM PCIe SATA SD I2C RGPIO DP user LED access Modified FSBL for Si5338 programming Special FSBL for QSPI Programming

Revision History

Page properties

hidden	true
id	Comments

Notes :

add every update file on the download
add design changes on description

...

anchor	Table_DRH
title	Design Revision History

...

new assembly variant
TE Script update
rework of the FSBLs
SI5338 CLKBuilder Pro Project
some additional Linux features
MAC from EEPROM
new assembly variants
remove special compiler flags, which was needed in 2018.2

...

new assembly variant

...

new assembly variant

...

correction on FSBL

...

TE0803-Starterkit_noprebuilt-vivado_2018.2-build_02_20180713085800.zip
TE0803-Starterkit-vivado_2018.2-build_02_20180713085740.zip

...

small petalinux changes
IO renaming
PL Design changes
additional notes for FSBL generated with Win SDK
changed *.bif

...

new assembly variant
solved Linux flash issue

...

bugfix TE0803-01-04EG board part file

...

new assembly variant

...

same CLK for both VIO

...

new assembly variant
solved JTAG/Linux issue

...

new assembly variant

...

initial release

Release Notes and Know Issues

Page properties

hidden	true
id	Comments

Notes :

add known Design issues and general notes for the current revision
do not delete known issue, add fixed version time stamp if issue fixed

...

anchor	Table_KI
title	Known Issues

Date	Version	Changes	Author
2024-06-18	3.1.18	Design flow → point 6 changed: the file boot.scr ... changed from required to optional	ma
2023-12-14	3.1.17	updated according to Vivado 2023.2	ma
2023-06-13	3.1.16	Design flow: added alternative programming files in Petalinux added chapter FSBL Patch in Software Design - Petalinux	ma
2023-06-01	3.1.15	removed u-boot.dtb from Design flow	ma
2023-06-01	3.1.14	expandable lists for revision history and supported hardware	wh
2023-05-25	3.1.13	updated according to Vivado 2022.2	ma
2023-02-08	3.1.12	removed content of Special FSBL for QSPI programming	ma
2022-08-24	3.1.11	Modification from link "available short link"	ma
2022-01-25	3.1.10	removed u-boot.dtb from QSPI-Boot mode and SD-Boot mode. Is implemented in BOOT.bin corrected Boot Source File in Boot Script-File	ma
2022-01-14	3.1.9	extended notes for microblaze boot process with linux add u.boot.dtb to petalinux notes add dtb to prebuilt content replace 20.2 with 21.2	jh
2021-06-28	3.1.8	added boot process for Microblaze minor typos, formatting	ma
2021-06-01	3.1.7	carrier reference note	jh
2021-05-04	3.1.6	removed zynq_ from zynq_fsbl	ma
2021-04-28	3.1.5	added macro "Scroll ignore" for suppression of horizontal dividing lines during .pdf-export minor typos, formatting	ma
2021-04-27	3.1.4	Version History changed from list to table Design flow removed step 5 from Design flow changed link from TE Board Part Files to Vivado Board Part Flow changed cmd shell from picture to codeblock added hidden template for "Copy PetaLinux build image files", depending from hardware added hidden template for "Power on PCB", depending from hardware Usage update of boot process Requirements - Hardware added "^*used as reference" for hardware requirements all placed a horizontal separation line under each chapter heading changed title-alignment for tables from left to center all tables added "<project folder>\board_files" in Vivado design sources	ma
	3.1.3	Design Flow formatting Launch formatting	ma
	3.1.2	minor typing corrections replaced SDK by Vitis changed from / to \ for windows paths replaced <design name> by <project folder> added "" for path names added boot.src description added USB for programming	ma
	3.1.1	swapped order from prebuilt files minor typing corrections removed Win OS path length from Design flow, added as caution in Design flow	ma
	3.1	Fix problem with pdf export and side scroll bar update 19.2 to 20.2 add prebuilt content option
	3.0	add fix table of content add table size as macro removed page initial creator

Custom_table_size_100

Page properties

hidden	true
id	Comments

Important General Note:

Export PDF to download, if vivado revision is changed!

Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)

Figure template (note: inner scroll ignore/only only with drawIO object):

Scroll Title

anchor	Figure_xyz
title	Text

Scroll Ignore
Create DrawIO object here: Attention if you copy from other page, use

Scroll Only
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

Table template:
- Layout macro can be use for landscape of large tables
- Set column width manually (can be used for small tables to fit over whole page) or leave empty (automatically)
Scroll Title
anchor Table_xyz
title Text
Scroll Table Layout
orientation portrait
sortDirection ASC
repeatTableHeaders default
sortByColumn 1
sortEnabled false
cellHighlighting true
Example Comment
1 2

...

Overview

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Notes :

short description of the design
Short Link of "Scroll only" macro:
- Use short link the Wiki Resource page, for example: http://trenz.org/te0720-info
- List of available short links: https://wiki.trenz-electronic.de/display/TI/Redirects

Linux with basic periphery of TE0808 StarterKit (TEBF0808 Carrier).

Refer to http://trenz.org/te0803-info for the current online version of this manual and other available documentation.

Key Features

Page properties

hidden	true
id	Comments

Notes :

Add basic key futures, which can be tested with the design

Excerpt
Vitis/Vivado 2023.2 TEBF0808 PetaLinux USB ETH MAC from EEPROM PCIe SATA SD I2C RGPIO Display Port (DP) user LED access Modified FSBL for Si5338 programming

Revision History

Page properties

hidden	true
id	Comments

Notes :

add every update file on the download
add design changes on description

Expand

title	Expand List

Scroll Title

anchor	Table_DRH
title-alignment	center
title	Design Revision History

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date	Vivado	Project Built	Authors	Description
2024-09-24	2023.2	TE0803-StarterKit_noprebuilt-vivado_2023.2-build_4_20240923123822.zip TE0803-StarterKit-vivado_2023.2-build_4_20240923123822.zip	John Hartfiel	remove boot.scr from uboot boot.bin to reduce size
2024-08-26	2023.2	TE0803-StarterKit-vivado_2023.2-build_4_20240822125103.zip TE0803-StarterKit_noprebuilt-vivado_2023.2-build_4_20240822125103.zip	John Hartfiel	2023.2 update new assembly variants update board files with emmc x8 instead of x4 fixed PS refc clk rounding issue update petalinux device tree and config add generic boot.scr file to petalinux
2023-09-14	2022.2	TE0803-StarterKit-vivado_2022.2-build_8_20230914124643.zip TE0803-StarterKit_noprebuilt-vivado_2022.2-build_8_20230914124643.zip	Manuela Strücker	2022.2 update new assembly variants
2022-10-17	2021.2.1	TE0803-StarterKit-vivado_2021.2-build_18_20221017093105.zip TE0803-StarterKit_noprebuilt-vivado_2021.2-build_18_20221017093105.zip	Manuela Strücker	script update
2022-08-30	2021.2.1	TE0803-StarterKit-vivado_2021.2-build_15_20220830131524.zip TE0803-StarterKit_noprebuilt-vivado_2021.2-build_15_20220830131524.zip	Manuela Strücker	new assembly variants
2022-04-05	2021.2	TE0803-StarterKit-vivado_2021.2-build_11_20220405095407.zip TE0803-StarterKit_noprebuilt-vivado_2021.2-build_11_20220405095407.zip	Manuela Strücker	2021.2 update
2021-09-06	2020.2	TE0803-StarterKit_noprebuilt-vivado_2020.2-build_7_20210906104631.zip TE0803-StarterKit-vivado_2020.2-build_7_20210906104617.zip	Manuela Strücker	2020.2 update
2020-04-06	2019.2	TE0803-StarterKit_noprebuilt-vivado_2019.2-build_9_20200406082458.zip TE0803-StarterKit-vivado_2019.2-build_9_20200406082321.zip	John Hartfiel	new assembly variants
2020-03-25	2019.2	TE0803-StarterKit_noprebuilt-vivado_2019.2-build_8_20200325082516.zip TE0803-StarterKit-vivado_2019.2-build_8_20200325082450.zip	John Hartfiel	script update
2020-01-23	2019.2	TE0803-StarterKit_noprebuilt-vivado_2019.2-build_3_20200123065955.zip TE0803-StarterKit-vivado_2019.2-build_3_20200123065933.zip	John Hartfiel	2019.2 update Vitis support FSBL SI programming procedure update petalinux device tree and u-boot update
2019-05-07	2018.3	TE0803-StarterKit-vivado_2018.3-build_05_20190507093424.zip TE0803-StarterKit_noprebuilt-vivado_2018.3-build_05_20190507093443.zip	John Hartfiel	new assembly variant TE Script update rework of the FSBLs SI5338 CLKBuilder Pro Project some additional Linux features MAC from EEPROM new assembly variants remove special compiler flags, which was needed in 2018.2
2018-10-25	2018.2	TE0803-Starterkit-vivado_2018.2-build_03_20181026141553.zip TE0803-Starterkit_noprebuilt-vivado_2018.2-build_03_20181026141611.zip	John Hartfiel	new assembly variant
2018-08-14	2018.2	TE0803-Starterkit-vivado_2018.2-build_02_20180814103204.zip TE0803-Starterkit_noprebuilt-vivado_2018.2-build_02_20180814103221.zip	John Hartfiel	new assembly variant
2018-07-23	2018.2	TE0803-Starterkit-vivado_2018.2-build_02_20180723204618.zip TE0803-Starterkit_noprebuilt-vivado_2018.2-build_02_20180723204638.zip	John Hartfiel	correction on FSBL
2018-07-12	2018.2	TE0803-Starterkit_noprebuilt-vivado_2018.2-build_02_20180713085800.zip TE0803-Starterkit-vivado_2018.2-build_02_20180713085740.zip	John Hartfiel	small petalinux changes IO renaming PL Design changes additional notes for FSBL generated with Win SDK changed *.bif
2018-05-17	2017.4	TE0803-Starterkit_noprebuilt-vivado_2017.4-build_09_20180517141540.zip TE0803-Starterkit-vivado_2017.4-build_09_20180517141523.zip	John Hartfiel	new assembly variant solved Linux flash issue
2018-04-11	2017.4	TE0803-Starterkit_noprebuilt-vivado_2017.4-build_07_20180411082139.zip TE0803-Starterkit-vivado_2017.4-build_07_20180411082116.zip	John Hartfiel	bugfix TE0803-01-04EG board part file
2018-02-13	2017.4	TE0803-Starterkit_noprebuilt-vivado_2017.4-build_06_20180213120642.zip TE0803-Starterkit-vivado_2017.4-build_06_20180213120615.zip	John Hartfiel	new assembly variant
2018-02-06	2017.4	TE0803-Starterkit_noprebuilt-vivado_2017.4-build_05_20180206082527.zip TE0803-Starterkit-vivado_2017.4-build_05_20180206082513.zip	John Hartfiel	same CLK for both VIO
2018-02-05	2017.4	TE0803-Starterkit_noprebuilt-vivado_2017.4-build_05_20180205154248.zip TE0803-Starterkit-vivado_2017.4-build_05_20180205154230.zip	John Hartfiel	new assembly variant solved JTAG/Linux issue
2018-01-31	2017.4	TE0803-Starterkit-vivado_2017.4-build_05_20180131124042.zip TE0803-Starterkit_noprebuilt-vivado_2017.4-build_05_20180131124057.zip	John Hartfiel	new assembly variant
2018-01-18	2017.4	TE0803-Starterkit-vivado_2017.4-build_05_20180118164553.zip TE0803-Starterkit_noprebuilt-vivado_2017.4-build_05_20180118164613.zip	John Hartfiel	initial release

Release Notes and Know Issues

Page properties

hidden	true
id	Comments

Notes :

add known Design issues and general notes for the current revision
do not delete known issue, add fixed version time stamp if issue fixed

Scroll Title

anchor	Table_KI
title-alignment	center
title	Known Issues

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Issues	Description	Workaround/Solution	To be fixed version
Xilinx Software	Incompatibility of board files for ZynqMP with eMMC activated between 2021.2 and 2021.2.1 patch, see Xilinx Forum Request	use corresponding board files for the Vivado versions	--
MAC from EEPROM	The MAC address stored in the EEPROM is not read out and initialised correctly during start-up. This is caused by two I2C expanders each switched to the same EEPROM with the same address i2cswitch@73 --> i2c@5 --> reg = <0x50> and i2cswitch@77 --> i2c@4 --> reg = <0x50>	Switching the second I2C expander (i2cswitch@77) to another channel in the fsbl solves the error during the start-up procedure.	Solved with 20220405update
QSPI Flash	Flash programming is not supported with boot mode QSPI or SD.	If flash programming fails, configure device for JTAG boot mode and try again or use Vivado Versions for programming. (Vivado 2020.2 or 2019.2)	--
Flash access on Linux	Device tree is not correct on Linux	add compatibility to "compatible “jedec,spi-nor”"	Solved with 20180517 update
USB UART Terminal is blocked / SDK Debugging is blocked	This happens only with 2017.4 Linux , when JTAG connection is established on Vivado HW Manager.	Do not use HW Manager connection, or if debugging is nessecary: Boot linux with usb terminal From the terminal: root root mount ifconfig eth0 Open two new SSH terminals via ethernet: root root , run user application ... Exit and close the usb terminal	Solved with 20180205 update

Requirements

Software

Page properties

hidden	true
id	Comments

Notes :

list of software which was used to generate the design

Scroll Title

anchor	Table_SW
title-alignment	center
title	Software

...

Do not use HW Manager connection, or if debugging is nessecary:

Boot linux with usb terminal
From the terminal: root root mount ifconfig eth0
Open two new SSH terminals via ethernet: root root , run user application ...
Exit and close the usb terminal

...

Requirements

Software

Page properties

hidden	true
id	Comments

Notes :

list of software which was used to generate the design

...

anchor	Table_SW
title	Software

...

Hardware

Page properties

hidden	true
id	Comments

Notes :

list of software which was used to generate the design

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on <design name>/board_files/*_board_files.csv

Design supports following modules:

...

anchor	Table_HWM
title	Hardware Modules

...

Note: Design contains also Board Part Files for TE0808 only configuration, this boart part files are not used for this reference design.

Design supports following carriers:

...

Content

...

content of the zip file

For general structure and of the reference design, see Project Delivery

list of hardware which was used to generate the design
mark the module and carrier board, which was used tested with an ^*

Basic description of TE Board Part Files is available on TE Board Part Files.

Complete List is available on "<project folder>\board_files\*_board_files.csv"

Design supports following modules:

Expand

title	Expand List

...

Module Model	Board Part Short Name	PCB Revision Support	DDR	QSPI Flash	EMMC	Others	Notes
TE0803-01-02CG-1E	2cg_2gb	REV01	2GB	64MB	NA	NA	NA
TE0803-01-02CG-1EA	2cg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-02EG-1E	2eg_2gb	REV01	2GB	64MB	NA	NA	NA
TE0803-01-02EG-1EA	2eg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-03CG-1E	3cg_2gb	REV01	2GB	64MB	NA	NA	NA
TE0803-01-03CG-1EA	3cg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-03EG-1E	3eg_2gb	REV01	2GB	64MB	NA	NA	NA
TE0803-01-03EG-1EA	3eg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-04CG-1EA	4cg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-04CG-1EB	4cg_2gb	REV01	2GB	256MB	NA	NA	NA
TE0803-01-04EG-1EA	4eg_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-04EV-1E3	4ev_2gb	REV01	2GB	128MB	NA	1 mm connectors	NA
TE0803-01-05EV-1EA	5ev_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-01-05EV-1IA	5ev_i_2gb	REV01	2GB	128MB	NA	NA	NA
TE0803-02-03EG-1EB	3eg_4gb	REV02\|REV01	4GB	128MB	NA	NA	NA
TE0803-02-04EG-1E3	4eg_4gb	REV02	4GB	128MB	NA	1 mm connectors	NA
TE0803-02-04EV-1EA	4ev_2gb	REV02\|REV01	2GB	128MB	NA	NA	NA
TE0803-02-04EV-1E3	4ev_4gb	REV02	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-2AE11-A	2cg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-2BE11-A	2eg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-3AE11-A	3cg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-3AE11-AK	3cg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-3AE10-R	3cg_0_2gb	REV03	2GB	NA	NA	NA	PS MIO 3.3V, not compatible to trenz carrier
TE0803-03-3BE11-A	3eg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-3BE21-A	3eg_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-3BE31-A	3eg_8gb	REV03	8GB	128MB	NA	NA	dual die ddr
TE0803-03-3BI21-A	3eg_i_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-3RI21-A	3eg_li_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-4AE11-A	4cg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-4BE11-A	4eg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-4BE21-L	4eg_4gb	REV03	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-4BI21-A	4eg_i_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-4BI21-X	4eg_i_4gb	REV03	4GB	128MB	NA	NA	U41 replaced with diode
TE0803-03-4BI61-A	4eg_8gb	REV03	8GB	128MB	NA	NA	dual die ddr
TE0803-03-4BI61-X	4eg_8gb	REV03	8GB	128MB	NA	NA	dual die ddr
TE0803-03-4DE11-A	4ev_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-4DE21-L	4ev_4gb	REV03	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-4DE21-LZ	4ev_4gb	REV03	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-4DI21-D	4ev_i_4gb	REV03	4GB	128MB	NA		NA
TE0803-03-4DI21-L	4ev_i_4gb	REV03	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-4GE11-A	4eg_2_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-4GE21-L	4eg_2_4gb	REV03	4GB	128MB	NA	1 mm connectors	NA
TE0803-03-4GI11-A	4eg_2i_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-4GI21-A	4eg_2i_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-5BE11-A	5eg_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-5DE11-A	5ev_2gb	REV03	2GB	128MB	NA	NA	NA
TE0803-03-5DI21-A	5ev_i_4gb	REV03	4GB	128MB	NA	NA	NA
TE0803-03-5DI24-A	5ev_i_4gb	REV03	4GB	512MB	NA	NA	NA
TE0803-03-S003	4ev_2gb	REV03	2GB	128MB	NA	NA	CAO: TE0803-03-4DE11-A
TE0803-03-S005	4eg_2gb	REV03	2GB	128MB	NA	NA	CAO: TE0803-03-4BI1?-A
TE0803-04-2AE11-A	2cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-2BE11-A	2eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-2BE11-AK	2eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-3AE10-R	3cg_0_2gb	REV04	2GB	NA	NA	NA	PS MIO 3.3V, not compatible to trenz carrier
TE0803-04-3AE11-A	3cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-3AE11-AK	3cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-3BE11-A	3eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-3BE21-A	3eg_4gb	REV04	4GB	128MB	NA	NA	NA
TE0803-04-3BE21-L	3eg_4gb	REV04	4GB	128MB	NA	NA	NA
TE0803-04-4AE11-A	4cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4AE11-AK	4cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4AE11-AZ	4cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4BE11-A	4eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4BE11-AK	4eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4BE21-L	4eg_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4BI21-A	4eg_i_4gb	REV04	4GB	128MB	NA	NA	NA
TE0803-04-4BI21-X	4eg_i_4gb	REV04	4GB	128MB	NA	NA	U41 replaced with diode
TE0803-04-4BI61-A	4eg_8gb	REV04	8GB	128MB	NA	NA	dual die ddr
TE0803-04-4BI61-X	4eg_8gb	REV04	8GB	128MB	NA	NA	dual die ddr
TE0803-04-4DE11-A	4ev_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4DE11-AK	4ev_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4DE11-AZ	4ev_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-4DE21-L	4ev_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4DE21-LZ	4ev_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4DI21-D	4ev_i_4gb	REV04	4GB	128MB	NA		NA
TE0803-04-4DI21-L	4ev_i_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4GE21-L	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4GE81-L	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-4GI21-A	4eg_2i_4gb	REV04	4GB	128MB	NA	NA	NA
TE0803-04-5BE11-A	5eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-5DE11-A	5ev_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-5DI21-A	5ev_i_4gb	REV04	4GB	128MB	NA	NA	NA
TE0803-04-S006	4ev_4gb	REV04	4GB	128MB	NA	1 mm connectors	CAO: TE0803-04-4DE21-L
TE0803-04-S009	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	CAO: TE0803-04-4GE21-L
TE0803-04-S010	5ev_2gb	REV04	2GB	128MB	NA	NA	CAO: TE0803-04-5DE11-A
TE0803-04-S011	4eg_2_4gb	REV04	4GB	64MB	NA	1 mm connectors	CAO: TE0803-04-4GE25-L
TE0803-04-S012	2cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-S013	3cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-S014	4eg_2_4gb	REV04	4GB	64MB	NA	1 mm connectors	CAO: TE0803-04-4GE2?-LZ
TE0803-04-S016	4cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-S017	2eg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-S018	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	NA
TE0803-04-S020	4cg_2gb	REV04	2GB	128MB	NA	NA	NA
TE0803-04-S022	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	CAO: TE0803-04-4GE21-LZ
TE0803-04-S023	4eg_2_4gb	REV04	4GB	128MB	NA	1 mm connectors	CAO: TE0803-04-4GE81-L
TE0803-04-S026	5ev_i_4gb	REV04	4GB	128MB	NA	NA	CAO: TE0803-04-5DI21-A
TE0803-04-S027	3cg_2gb	REV04	2GB	128MB	NA	NA	CAO:TE0803-04-3AE11-A

^*used as reference

Note: Design contains also Board Part Files for TE0803 only configuration, this board part files are not used for this reference design.

Design supports following carriers:

Scroll Title

anchor	Table_HWC
title-alignment	center
title	Hardware Carrier

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Carrier Model	Notes
TEBF0808^*	Used as reference carrier. Important: CPLD Firmware REV07 or newer is recommended

^*used as reference

Additional HW Requirements:

Scroll Title

anchor	Table_AHW
title-alignment	center
title	Additional Hardware

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Additional Hardware	Notes
DP Monitor	Optional HW Not all monitors are supported, also Adapter to other Standard can make trouble. Design was tested with DELL P2421
USB Keyboard	Optional HW Can be used to get access to console which is show on DP
USB Stick	Optional HW USB was tested with USB memory stick
SATA Disk	Optional HW
PCIe Card	Optional HW
ETH cable	Optional HW Ethernet works with DHCP, but can be setup also manually
SD card	with fat32 partition

Content

Page properties

hidden	true
id	Comments

Notes :

content of the zip file

For general structure and usage of the reference design, see Project Delivery - AMD devices

Design Sources

Scroll Title

anchor	Table_DS
title-alignment	center
title	Design sources

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Type	Location	Notes
Vivado	<project folder>\block_design <project folder>\constraints <project folder>\ip_lib <project folder>\board_files	Vivado Project will be generated by TE Scripts
Vitis	<project folder>\sw_lib	Additional Software Template for Vitis and apps_list.csv with settings automatically for Vitis app generation
PetaLinux	<project folder>\os\petalinux	PetaLinux template with current configuration

Additional Sources

Scroll Title

anchor	Table_ADS
title-alignment	center
title	Additional design sources

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Type	Location	Notes
SI5338	<project folder>\misc\PLL\Si5338_B	SI5338 Project with current PLL Configuration
init.sh	<project folder>\misc\sd	Additional Initialization Script for Linux

Prebuilt

Page properties

hidden	true
id	Comments

Notes :

prebuilt files

Template Table:

Scroll Title

anchor	Table_PF
title-alignment	center
title	Prebuilt files

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

File	File-Extension	Description
BIF-File	*.bif	File with description to generate Bin-File
BIN-File	*.bin	Flash Configuration File with Boot-Image (Zynq-FPGAs)
BIT-File	*.bit	FPGA (PL Part) Configuration File
Boot Script-File	*.scr	Distro Boot Script file
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Debian SD-Image	*.img	Debian Image for SD-Card
Diverse Reports	---	Report files in different formats
Device Tree	*.dts	Device tree (2 possible, one for u-boot and one for linux)
Hardware-Platform-Description-File	*.xsa	Exported Vivado hardware description file for Vitis and PetaLinux
LabTools Project-File	*.lpr	Vivado Labtools Project File
MCS-File	*.mcs	Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
MMI-File	*.mmi	File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
OS-Image	*.ub	Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems
SREC-File	*.srec	Converted Software Application for MicroBlaze Processor Systems

Scroll Title

anchor	Table_PF
title-alignment	center
title	Prebuilt files (only on ZIP with prebult content)

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

File	File-Extension	Description
BIF-File	*.bif	File with description to generate Bin-File
BIN-File	*.bin	Flash Configuration File with Boot-Image (Zynq-FPGAs)
BIT-File	*.bit	FPGA (PL Part) Configuration File
Boot Script-File	*.scr	Distro Boot Script file
DebugProbes-File	*.ltx	Definition File for Vivado/Vivado Labtools Debugging Interface
Diverse Reports	---	Report files in different formats
Device Tree	*.dts	Device tree (2 possible, one for u-boot and one for linux)
Hardware-Platform-Description-File	*.xsa	Exported Vivado hardware description file for Vitis and PetaLinux
LabTools Project-File	*.lpr	Vivado Labtools Project File
OS-Image	*.ub	Image with Linux Kernel (On Petalinux optional with Devicetree and RAM-Disk)
Software-Application-File	*.elf	Software Application for Zynq or MicroBlaze Processor Systems

Download

Reference Design is only usable with the specified Vivado/Vitis/PetaLinux version. Do never use different Versions of Xilinx Software for the same Project.

Page properties

hidden	true
id	Comments

Important set new Vivado version link on every Design update of new vivado version!
Set Link to download folder (Remove ../de/.. ../en/.. from url) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

Reference Design is available on:

TE0803 "StarterKit" Reference Design

Design Flow

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Notes :

Basic Design Steps
Add/ Remove project specific description

Note
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first launch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

Additional Sources

...

anchor	Table_ADS
title	Additional design sources

...

Prebuilt

...

hidden	true
id	Comments

Notes :

...

anchor	Table_PF
title	Prebuilt files

...

File

...

File-Extension

...

Description

...

Debian SD-Image

...

*.img

...

Debian Image for SD-Card

...

MCS-File

...

*.mcs

...

Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)

...

MMI-File

...

*.mmi

...

File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)

...

SREC-File

...

*.srec

...

Converted Software Application for MicroBlaze Processor Systems

...

anchor	Table_PF
title	Prebuilt files (only on ZIP with prebult content)

...

File

...

File-Extension

...

Description

...

Download

Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.

Page properties

hidden	true
id	Comments

Important set new Vivado version link on every Design update of new vivado version!
Set Link to download folder (Remove ../de/.. ../en/.. from url) for example: https://shop.trenz-electronic.de/Download/?path=Trenz_Electronic/Modules_and_Module_Carriers/4x5/TE0712/Reference_Design/2018.2/test_board

Reference Design is available on:

TE0803 "StarterKit" Reference Design

Design Flow

Page properties

hidden	true
id	Comments

Notes :

Basic Design Steps
Add/ Remove project specific description

Note
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch.

Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.

Launch

Page properties

hidden	true
id	Comments

Note:

Programming and Startup procedure

Programming

Note
Check Module and Carrier TRMs for proper HW configuration before you try any design.

Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging

QSPI

Optional for Boot.bin on QSPI Flash and image.ub on SD.

Connect JTAG and power on carrier with module
Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
Type on Vivado TCL Console: TE::pr_program_flash_binfile -swapp u-boot
Note: To program with SDK/Vivado GUI, use special FSBL (zynqmp_fsbl_flash) on setup
optional "TE::pr_program_flash_binfile -swapp hello_te0803" possible
Copy image.ub on SD-Card
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
Set Boot Mode to QSPI-Boot and insered SD.
- Depends on Carrier, see carrier TRM.
- TEBF0808 change automatically the Boot Mode to SD, if SD is insered, optional CPLD Firmware without Boot Mode changing for mircoSD Slot is available on the download area

SD

Copy image.ub and Boot.bin on SD-Card.
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

Prepare HW like described on section 68616267
Connect UART USB (JTAG XMOD)
Select SD Card as Boot Mode (or QSPI - depending on step 1)
Note: See TRM of the Carrier, which is used.
(Optional) Insert PCIe Card (detection depends on Linux driver. Only some basic drivers are installed)
(Optional) Connect Sata Disc
(Optional) Connect DisplayPort Monitor (List of usable Monitors: https://www.xilinx.com/support/answers/68671.html)
(Optional) Connect Network Cable
Power On PCB
Note: 1. ZynqMP Boot ROM loads PMU Firmware and FSBL from SD into OCM, 2. FSBL loads ATF(bl31.elf) and U-boot from SD/QSPI into DDR, 3. U-boot load Linux from SD into DDR.

Linux

Open Serial Console (e.g. putty)
1. Speed: 115200
2. COM Port: Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)
Linux Console:
Note: Wait until Linux boot finished For Linux Login use:
1. User Name: root
2. Password: root
You can use Linux shell now.
1. I2C 0 Bus type: i2cdetect -y -r 0
2. ETH0 works with udhcpc
3. USB type "lsusb" or connect USB device
4. PCIe type "lspci"
Option Features
1. Webserver to get access to Zynq
  1. insert IP on web browser to start web interface
2. init.sh scripts
  1. add init.sh script on SD, content will be load automatically on startup (template included in ./misc/SD)

Vivado Hardware Manager

Page properties

hidden	true
id	Comments

Note:

Add picture of HW Manager
add notes for the signal either groups or topics, for example:
Control:
- add controllable IOs with short notes..
Monitoring:
- add short notes for signals which will be monitored only
SI5338_CLK0 Counter:
Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).Set radix from VIO signals to unsigned integer.Note: Frequency Counter is inaccurate and displayed unit is Hz

Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).

RGPIO Interface (Important: CPLD Firmware REV07 or newer is needed) for Control and Monitoring:
- Set Enable to send Write date over RGPIO interface.
  - Important use CPLD Firmware REV07 or newer: https://wiki.trenz-electronic.de/display/PD/TEBF0808+CPLD
    - Buttons, LEDs, Status...

...

anchor	Figure_VHM
title	Vivado Hardware Manager

...

Image Removed

...

Image Removed

System Design - Vivado

HTML
<!-- Description of Block Design, Constrains... BD Pictures from Export... -->

Block Design

Scroll Title

anchor	Figure_BD
title	Block Design

Image Removed

PS Interfaces

Page properties

hidden	true
id	Comments

Note:

optional for Zynq / ZynqMP only
add basic PS configuration

Activated interfaces:

...

Constrains

Basic module constrains

Code Block

language	ruby
title	_i_bitgen.xdc

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

Design specific constrain

Code Block

language	ruby
title	_i_io.xdc

# system controller ip
#LED_HD SC0 J3:31
#LED_XMOD SC17 J3:48 
#CAN RX SC19 J3:52 B26_L11_P
#CAN TX SC18 J3:50 B26_L11_N
#CAN S  SC16 J3:46 B26_L1_N

set_property PACKAGE_PIN G14 [get_ports BASE_sc0]
set_property PACKAGE_PIN D15 [get_ports BASE_sc5]
set_property PACKAGE_PIN H13 [get_ports BASE_sc6]
set_property PACKAGE_PIN H14 [get_ports BASE_sc7]
set_property PACKAGE_PIN A13 [get_ports BASE_sc10_io]
set_property PACKAGE_PIN B13 [get_ports BASE_sc11]
set_property PACKAGE_PIN A14 [get_ports BASE_sc12]
set_property PACKAGE_PIN B14 [get_ports BASE_sc13]
set_property PACKAGE_PIN F13 [get_ports BASE_sc14]
set_property PACKAGE_PIN G13 [get_ports BASE_sc15]
set_property PACKAGE_PIN A15 [get_ports BASE_sc16]
set_property PACKAGE_PIN B15 [get_ports BASE_sc17]
set_property PACKAGE_PIN J14 [get_ports BASE_sc18]
set_property PACKAGE_PIN K14 [get_ports BASE_sc19 ]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc0]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc5]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc6]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc7]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc10_io]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc11]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc12]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc13]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc14]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc15]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc16]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc17]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc18]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc19]

# Audio Codec
#LRCLK          J3:49 
#BCLK            J3:51 
#DAC_SDATA    J3:53 
#ADC_SDATA    J3:55 
set_property PACKAGE_PIN L13 [get_ports LRCLK ]
set_property PACKAGE_PIN L14 [get_ports BCLK ]
set_property PACKAGE_PIN E15 [get_ports DAC_SDATA ]
set_property PACKAGE_PIN F15 [get_ports ADC_SDATA ]
set_property IOSTANDARD LVCMOS18 [get_ports LRCLK ]
set_property IOSTANDARD LVCMOS18 [get_ports BCLK ]
set_property IOSTANDARD LVCMOS18 [get_ports DAC_SDATA ]
set_property IOSTANDARD LVCMOS18 [get_ports ADC_SDATA ]

Software Design - SDK/HSI

Page properties

hidden	true
id	Comments

Note:

optional chapter separate
sections for different apps

For SDK project creation, follow instructions from:

SDK Projects

Application

...

hidden	true
id	Comments

----------------------------------------------------------

FPGA Example

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2018.3 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

Modified Files: blconfig.h, bootloader.c
Changes:
- Add some console outputs and changed bootloader read address.
- Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2018.3 xilisf_v5_11

Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

zynq_fsbl

TE modified 2018.3 FSBL

General:

Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\
General Changes:
- Display FSBL Banner and Device ID

Module Specific:

Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY

zynq_fsbl_flash

TE modified 2018.3 FSBL

General:

Modified Files: main.c
General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2018.3 FSBL

General:

Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
Add Files: te_xfsbl_hooks.h/.c (for hooks and board)\n\
General Changes:
- Display FSBL Banner and Device Name

Module Specific:

Add Files: all TE Files start with te_*
- Si5338 Configuration
- ETH+OTG Reset over MIO

zynqmp_fsbl_flash

TE modified 2018.3 FSBL

General:

Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation

zynqmp_pmufw

Xilinx default PMU firmware.

...

General Example:

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

----------------------------------------------------------
-------------------------TE Reference Design---------------------------
--------------------------------------------------------------------
-- (0)  Module selection guide, project creation...prebuilt export...
-- (1)  Create minimum setup of CMD-Files and exit Batch
-- (2)  Create maximum setup of CMD-Files and exit Batch
-- (3)  (internal only) Dev
-- (4)  (internal only) Prod
-- (c)  Go to CMD-File Generation (Manual setup)
-- (d)  Go to Documentation (Web Documentation)
-- (g)  Install Board Files from Xilinx Board Store (beta)
-- (a)  Start design with unsupported Vivado Version (beta)
-- (x)  Exit Batch (nothing is done!)
----
Select (ex.:'0' for module selection guide)

Press 0 and enter to start "Module Selection Guide"
Createproject and follow instructions of the product selection guide, settings file will be configured automatically during this process.
- optional for manual changes: Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
  Note
  Note: Select correct one, see also Vivado Board Part Flow
  Important: Use Board Part Files, which ends with *_tebf0808
Create hardware description file (.xsa file) for PetaLinux project and export to prebuilt folder
Code Block
language py
theme Midnight
title run on Vivado TCL (Script generates design and export files into "<project folder>\prebuilt\hardware\<short name>")
TE::hw_build_design -export_prebuilt
Info
Using Vivado GUI is the same, except file export to prebuilt folder.
Create and configure your PetaLinux project with exported .xsa-file, see PetaLinux KICKstart
- use TE Template from "<project folder>\os\petalinux"
- use exported .xsa file from "<project folder>\prebuilt\hardware\<short name>" . Note: HW Export from Vivado GUI creates another path as default workspace.
- The build images are located in the "<plnx-proj-root>/images/linux" directory
(optional) Configure the boot.scr file as needed, see Distro Boot with Boot.scr

Generate Programming Files with Vitis (recommended)

Copy PetaLinux build image files to prebuilt folder

copy u-boot.elf, system.dtb, bl31.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder

Info
"<project folder>\prebuilt\os\petalinux\<ddr size>" or "<project folder>\prebuilt\os\petalinux\<short name>"

Page properties

hidden	true
id	Comments

This step depends on Xilinx Device/Hardware

for Zynq-7000 series

copy u-boot.elf, system.dtb, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder

for ZynqMP

copy u-boot.elf, system.dtb, bl31.elf, image.ub and boot.scr from "<plnx-proj-root>/images/linux" to prebuilt folder

for Microblaze

...

Generate Programming Files with Vitis

Code Block

language	py
theme	Midnight
title	run on Vivado TCL (Script generates applications and bootable files, which are defined in "test_board\sw_lib\apps_list.csv")

TE::sw_run_vitis -all
TE::sw_run_vitis (optional; Start Vitis from Vivado GUI or start with TE Scripts on Vivado TCL)

Note
TCL scripts generate also platform project, this must be done manually in case GUI is used. See Vitis

Generate Programming Files with Petalinux (alternative), see PetaLinux KICKstart

Launch

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Note:

Programming and Startup procedure

Programming

Note

Check Module and Carrier TRMs for proper HW configuration before you try any design.

Reference Design is also available with prebuilt files. It's recommended to use TE prebuilt files for first launch.

Xilinx documentation for programming and debugging: Vivado/Vitis/SDSoC-Xilinx Software Programming and Debugging

Get prebuilt boot binaries

Run _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell
Press 0 and enter to start "Module Selection Guide"
1. Select assembly version
2. Validate selection
3. Select create and open delivery binary folder
  Info
  Note: Folder "<project folder>\_binaries_<Article Name>" with subfolder "boot_<app name>" for different applications will be generated

QSPI-Boot mode

Option for Boot.bin on QSPI Flash.

Connect JTAG and power on carrier with module
Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
Code Block
language py
theme Midnight
title run on Vivado TCL (Script programs BOOT.bin on QSPI flash)
TE::pr_program_flash -swapp hello_te0803
Copy image.ub and boot.scr on SD or USB
- use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder,see: Get prebuilt boot binaries
- or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt"
Set Boot Mode to QSPI-Boot
- Depends on Carrier, see carrier TRM.
- TEBF0808 automatically changes the boot mode to SD when the SD card is inserted. Optional CPLD firmware without boot mode change for microSD slot is available in the download area

SD-Boot mode

Copy image.ub, boot.src and Boot.bin on SD
- use files from "<project folder>\_binaries_<Article Name>\boot_linux" from generated binary folder, see: Get prebuilt boot binaries
- or use prebuilt file location, see "<project folder>\prebuilt\file_location.txt"
Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
Insert SD-Card in SD-Slot.

JTAG

Not used on this Example.

Usage

Prepare HW like described on section Programming
Connect UART USB (JTAG XMOD)

Select SD Card as Boot Mode (or QSPI - depending on step 1)

Info
Note: See TRM of the Carrier, which is used.

Tip

Starting with Petalinux version 2020.1, the industry standard "Distro-Boot" boot flow for U-Boot was introduced, which significantly expands the possibilities of the boot process and has the primary goal of making booting much more standardised and predictable.
The boot options described above describe the common boot processes for this hardware; other boot options are possible.
For more information see Distro Boot with Boot.scr

(Optional with TEBF0808) Insert PCIe Card (detection depends on Linux driver. Only some basic drivers are installed)
(Optional with TEBF0808) Connect SATA Disc
(Optional with TEBF0808) Connect DisplayPort Monitor (List of usable Monitors: https://www.xilinx.com/support/answers/68671.html)
(Optional with TEBF0808) Connect Network Cable

Power On PCB

Expand

title	boot process

1. ZynqMP Boot ROM loads FSBL from SD/QSPI into OCM,

2. FSBL init the PS, programs the PL using the bitstream and loads PMU, ATF and U-boot from SD/QSPI into DDR,

3. U-boot loads Linux (image.ub) from SD/QSPI/... into DDR

Linux

Open Serial Console (e.g. putty)
- Speed: 115200
- select COM Port
  Info
  Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)
Linux Console:
Code Block
language bash
theme Midnight
# password disabled petalinux login: root Password: root
Info
Note: Wait until Linux boot finished

You can use Linux shell now.

Code Block

language	bash
theme	Midnight

i2cdetect -y -r 0	(check I2C Bus, replace 0 with other bus number is also possible)
dmesg | grep rtc	(RTC check)
udhcpc				(ETH0 check)
lsusb				(USB check)
lspci				(PCIe check)

Option Features
- Webserver to get access to Zynq
  - insert IP on web browser to start web interface
- init.sh scripts
  - add init.sh script on SD, content will be load automatically on startup (template included in "<project folder>\misc\SD")

Vivado Hardware Manager

Page properties

hidden	true
id	Comments

Note:

Add picture of HW Manager
add notes for the signal either groups or topics, for example:
Control:
- add controllable IOs with short notes..
Monitoring:
- add short notes for signals which will be monitored only
- SI5338 CLKs:
  - Set radix from VIO signals to unsigned integer.
    Note: Frequency Counter is inaccurate and displayed unit is Hz
  - expected CLK Frequency...

Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder).

RGPIO Interface (Important: CPLD Firmware REV07 or newer is needed) for Control and Monitoring:
- Set Enable to send Write date over RGPIO interface.
  - Important use CPLD Firmware REV07 or newer: https://wiki.trenz-electronic.de/display/PD/TEBF0808+CPLD
    - Buttons, LEDs, Status...

Control:
- LEDs: XMOD 2 (without green dot) and HD LED are accessible.
- CAN_S

Scroll Title

anchor	Figure_VHM
title-alignment	center
title	Vivado Hardware Manager

Image Added

System Design - Vivado

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Note:

Description of Block Design, Constrains... BD Pictures from Export...

Block Design

Scroll Title

anchor	Figure_BD
title-alignment	center
title	Block Design

Image Added

PS Interfaces

Page properties

hidden	true
id	Comments

Note:

optional for Zynq / ZynqMP only
add basic PS configuration

Activated interfaces:

Scroll Title

anchor	Table_PSI
title-alignment	center
title	PS Interfaces

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Type	Note
DDR
QSPI	MIO
SD0	MIO(emmc)
SD1	MIO(sd)
CAN0	EMIO
I2C0	MIO
PJTAG0	MIO
UART0	MIO
GPIO0	MIO
SWDT0..1
TTC0..3
GEM3	MIO
USB0	MIO/GTP
PCIe	MIO/GTP
SATA	GTP
DisplayPort	EMIO/GTP

Constrains

Basic module constrains

Code Block

language	ruby
title	_i_bitgen.xdc

set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLNONE [current_design]

Design specific constrain

Code Block

language	ruby
title	_i_io.xdc

# system controller ip
#LED_HD SC0 J3:31
#LED_XMOD SC17 J3:48 
#CAN RX SC19 J3:52 B26_L11_P
#CAN TX SC18 J3:50 B26_L11_N
#CAN S  SC16 J3:46 B26_L1_N

set_property PACKAGE_PIN G14 [get_ports BASE_sc0]
set_property PACKAGE_PIN D15 [get_ports BASE_sc5]
set_property PACKAGE_PIN H13 [get_ports BASE_sc6]
set_property PACKAGE_PIN H14 [get_ports BASE_sc7]
set_property PACKAGE_PIN A13 [get_ports BASE_sc10_io]
set_property PACKAGE_PIN B13 [get_ports BASE_sc11]
set_property PACKAGE_PIN A14 [get_ports BASE_sc12]
set_property PACKAGE_PIN B14 [get_ports BASE_sc13]
set_property PACKAGE_PIN F13 [get_ports BASE_sc14]
set_property PACKAGE_PIN G13 [get_ports BASE_sc15]
set_property PACKAGE_PIN A15 [get_ports BASE_sc16]
set_property PACKAGE_PIN B15 [get_ports BASE_sc17]
set_property PACKAGE_PIN J14 [get_ports BASE_sc18]
set_property PACKAGE_PIN K14 [get_ports BASE_sc19 ]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc0]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc5]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc6]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc7]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc10_io]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc11]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc12]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc13]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc14]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc15]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc16]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc17]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc18]
set_property IOSTANDARD LVCMOS18 [get_ports BASE_sc19]

# Audio Codec
#LRCLK		 J3:49 
#BCLK		 J3:51 
#DAC_SDATA	 J3:53 
#ADC_SDATA	 J3:55 
set_property PACKAGE_PIN L13 [get_ports I2S_lrclk ]
set_property PACKAGE_PIN L14 [get_ports I2S_bclk ]
set_property PACKAGE_PIN E15 [get_ports I2S_sdin ]
set_property PACKAGE_PIN F15 [get_ports I2S_sdout ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_lrclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_bclk ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdin ]
set_property IOSTANDARD LVCMOS18 [get_ports I2S_sdout ] 


# MGTs only for ZU4/5 Devices
#   Y6    MGT_224_CLK0_P -> B2B,J3-61 -> TEBF0808-04a_B230_CLK_P/CLK7_P -> B2B,J2-13 -> floating
#   Y5    MGT_224_CLK0_N -> B2B,J3-59 -> TEBF0808-04a_B230_CLK_N/CLK7_N -> B2B,J2-15 -> floating
#   V6    MGT_224_CLK1_P -> U5,38 -> Si5338 -> CLK1
#   V5    MGT_224_CLK1_N -> U5,37 -> Si5338 -> CLK1

#set_property PACKAGE_PIN Y6   [get_ports {MGT_CLK_IN_clk_p[0]}]
#set_property PACKAGE_PIN V6   [get_ports {MGT_CLK_IN_clk_p[1]}]

Software Design - Vitis

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Note:

optional chapter separate
sections for different apps

For Vitis project creation, follow instructions from:

Vitis

Application

Page properties

hidden	true
id	Comments

----------------------------------------------------------

FPGA Example

----------------------------------------------------------

scu

MCS Firmware to configure SI5338 and Reset System.

srec_spi_bootloader

TE modified 2023.2 SREC

Bootloader to load app or second bootloader from flash into DDR

Descriptions:

Modified Files: blconfig.h, bootloader.c
Changes:
- Add some console outputs and changed bootloader read address.
- Add bugfix for 2018.2 qspi flash

xilisf_v5_11

TE modified 2023.2 xilisf_v5_11

Changed default Flash type to 5.

----------------------------------------------------------

Zynq Example:

----------------------------------------------------------

fsbl

TE modified 2023.2 FSBL

General:

Modified Files: main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c (for hooks and board)
General Changes:
- Display FSBL Banner and Device ID

Module Specific:

Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY

----------------------------------------------------------

ZynqMP Example:

----------------------------------------------------------

zynqmp_fsbl

TE modified 2023.2 FSBL

General:

Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
General Changes:
- Display FSBL Banner and Device Name

Module Specific:

Add Files: all TE Files start with te_*
- Si5338 Configuration
- ETH+OTG Reset over MIO

zynqmp_pmufw

Xilinx default PMU firmware.

----------------------------------------------------------

General Example:

----------------------------------------------------------

hello_te0820

Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Template location: "<project folder>\sw_lib\sw_apps\"

zynqmp_fsbl

TE modified 2023.2 FSBL

General:

Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c (search for 'TE Mod' on source code)
Add Files: te_xfsbl_hooks.h/.c (for hooks and board)
General Changes:
- Display FSBL Banner and Device Name

Module Specific:

Add Files: all TE Files start with te_*
- Si5338 Configuration
- OTG+PCIe Reset over MIO
- I2C MUX for EEPROM MAC

hello_te0803

Hello TE0803 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. Vitis is used to generate Boot.bin.

Software Design - PetaLinux

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Note:

optional chapter separate
sections for linux
Add "No changes." or "Activate: and add List"

For PetaLinux installation and project creation, follow instructions from:

PetaLinux KICKstart

Config

Start with petalinux-config or petalinux-config --get-hw-description

Changes:

select SD default instead of eMMC:
- CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y
add new flash partition for bootscr and sizing
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART0_SIZE=0xE00000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART1_SIZE=0x3000000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART2_SIZE=0x40000
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_NAME="bootscr"
- CONFIG_SUBSYSTEM_FLASH_PSU_QSPI_0_BANKLESS_PART3_SIZE=0x80000
- CONFIG_SUBSYSTEM_UBOOT_QSPI_FIT_IMAGE_OFFSET=0xE00000
- CONFIG_SUBSYSTEM_UBOOT_QSPI_FIT_IMAGE_SIZE=0x3000000
Identification
- CONFIG_SUBSYSTEM_HOSTNAME="Trenz"
- CONFIG_SUBSYSTEM_PRODUCT="TE0803_TEBF0808"

U-Boot

Start with petalinux-config -c u-boot
Changes:

MAC from eeprom together with uboot and device tree settings:
- CONFIG_NVMEM=y
- CONFIG_DM_RTC=y (needed for nvmem driver because of bug in uboot )
Boot Modes:
- CONFIG_BOOT_SCRIPT_OFFSET=0x3E40000
- CONFIG_QSPI_BOOT=y
- CONFIG_SD_BOOT=y
- CONFIG_ENV_OVERWRITE=y
- # CONFIG_ENV_IS_IN_FAT is not set
- # CONFIG_ENV_IS_IN_NAND is not set
- # CONFIG_ENV_IS_IN_SPI_FLASH is not set

Identification
- CONFIG_IDENT_STRING=" TE0803_TEBF0808"

Add generic boot.scr:

See "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\u-boot\u-boot-xlnx-scr\boot.cmd.generic"

Change platform-top.h:

Code Block

language	js

#no changes

Device Tree

Code Block

language	js
title	project-spec\meta-user\recipes-bsp\device-tree\files\system-user.dtsi

/include/ "system-conf.dtsi"


/*------------------ gtr --------------------*/

//https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/18841716/Zynq+Ultrascale+MPSOC+Linux+SIOU+driver

/ {
  refclk3:psgtr_dp_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <27000000>;
  };

  refclk2:psgtr_pcie_usb_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <100000000>;
  };

  //refclk1:psgtr_unused_clock {
  //        compatible = "fixed-clock";
  //        #clock-cells = <0x00>;
  //        clock-frequency = <100000000>;
  //};

  refclk0:psgtr_sata_clock {
          compatible = "fixed-clock";
          #clock-cells = <0x00>;
          clock-frequency = <150000000>;
  };
};

&psgtr {
  clocks = <&refclk0 &refclk2 &refclk3>;
  /* ref clk instances used per lane */
  clock-names = "ref0\0ref2\0ref3";
};



/*------------------ SD --------------------*/
&sdhci0 {
    // bus-width
    bus-width = <8>;

};

&sdhci1 {
    // disable-wp;
    no-1-8-v;

};


/*------------------- USB --------------------*/
&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    snps,usb3_lpm_capable;
    snps,dis_u3_susphy_quirk;
    snps,dis_u2_susphy_quirk;
    phy-names = "usb2-phy","usb3-phy";
    maximum-speed = "super-speed";
};


/*------------------ ETH PHY --------------------*/
&gem3 {
    /delete-property/ local-mac-address;
    phy-handle = <&phy0>;
    
    nvmem-cells = <ð0_addr>;
    nvmem-cell-names = "mac-address";
    
    phy0: phy0@1 {
        device_type = "ethernet-phy";
        reg = <1>;
    };
};
 
/*----------------- SATA PHY --------------------*/
&sata {
 
            ceva,p0-burst-params = <0x13084a06>;
            ceva,p0-cominit-params = <0x18401828>;
            ceva,p0-comwake-params = <0x614080e>;
            ceva,p0-retry-params = <0x96a43ffc>;
            ceva,p1-burst-params = <0x13084a06>;
            ceva,p1-cominit-params = <0x18401828>;
            ceva,p1-comwake-params = <0x614080e>;
            ceva,p1-retry-params = <0x96a43ffc>;
 
};
 
 
/*-------------------- QSPI ---------------------*/
&qspi {
    num-cs = <2>;

    flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0>, <1>;
        parallel-memories = /bits/ 64 <0x1000000 0x1000000>; /* 2* 16MB --> dummy for all types of this QSPI type */

        spi-rx-bus-width = <4>;
        spi-tx-bus-width = <4>;
        spi-max-frequency = <166000000>; //166MHz max. frequency for mt25qu512
        
        #address-cells = <1>;
        #size-cells = <1>;
    };
};



/*------------------ I2C --------------------*/
&i2c0 {
    i2cswitch@73 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x73>;
        i2c-mux-idle-disconnect;
        i2c@0 { // MCLK TEBF0808 SI5338A, 570FBB000290DG_unassembled
            reg = <0>;
        };
        i2c@1 { // SFP TEBF0808 PCF8574DWR
            reg = <1>;
        };
        i2c@2 { // PCIe
            reg = <2>;
        };
        i2c@3 { // SFP1 TEBF0808
            reg = <3>;
        };
        i2c@4 {// SFP2 TEBF0808
            reg = <4>;
        };
        i2c@5 { // TEBF0808 EEPROM
            reg = <5>;
            eeprom: eeprom@50 {
                compatible = "microchip,24aa025", "atmel,24c02";
                reg = <0x50>;
                
                #address-cells = <1>;
                #size-cells = <1>;
                eth0_addr: eth-mac-addr@FA {
                  reg = <0xFA 0x06>;
                };
           };
        };
        i2c@6 { // TEBF0808 FMC
            reg = <6>;
        };
        i2c@7 { // TEBF0808 USB HUB
            reg = <7>;
        };
    };
    i2cswitch@77 { // u
        compatible = "nxp,pca9548";
        reg = <0x77>;
        i2c-mux-idle-disconnect;
        i2c@0 { // TEBF0808 PMOD P1
            reg = <0>;
        };
        i2c@1 { // i2c Audio Codec
            reg = <1>;
            /*
            adau1761: adau1761@38 {
                compatible = "adi,adau1761";
                reg = <0x38>;
            };
            */
        };
        i2c@2 { // TEBF0808 Firefly A
            reg = <2>;
        };
        i2c@3 { // TEBF0808 Firefly B
            reg = <3>;
        };
        i2c@4 { //Module PLL Si5338 or SI5345
            reg = <4>;
        };
        i2c@5 { //TEBF0808 CPLD
            reg = <5>;
        };
        i2c@6 { //TEBF0808 Firefly PCF8574DWR
            reg = <6>;
        };
        i2c@7 { // TEBF0808 PMOD P3
            reg = <7>;
        };
    };
};

Kernel

Start with petalinux-config -c kernel

Changes:

Only needed to fix JTAG Debug issue:
- # CONFIG_CPU_FREQ is not set
Support PCIe memory card
- CONFIG_NVME_CORE=y
- CONFIG_BLK_DEV_NVME=y
- # CONFIG_NVME_MULTIPATH is not set
- # CONFIG_NVME_HWMON is not set
- CONFIG_NVME_TARGET=y
- # CONFIG_NVME_TARGET_PASSTHRU is not set
- # CONFIG_NVME_TARGET_LOOP is not set
- # CONFIG_NVME_TARGET_FC is not set
- # CONFIG_NVME_TARGET_TCP is not set
- CONFIG_SATA_AHCI=y
- CONFIG_SATA_MOBILE_LPM_POLICY=0

Rootfs

Start with petalinux-config -c rootfs

Changes:

For web server app:
- CONFIG_busybox-httpd=y
For additional test tools only:
- CONFIG_i2c-tools=y
- CONFIG_packagegroup-petalinux-utils=y (util-linux,cpufrequtils,bridge-utils,mtd-utils,usbutils,pciutils,canutils,i2c-tools,smartmontools,e2fsprogs)
For auto login:
- CONFIG_imagefeature-serial-autologin-root=y

FSBL patch (alternative for vitis fsbl trenz patch)

See "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw"

Note
te_* files are identical to files in "<project folder>\sw_lib\sw_apps\zynqmp_fsbl\src" except for the PLL files (SI5338) which depend on PLL revision. The PLL files may have to be copied again manually into the appropriate petalinux folder "<project folder>\os\petalinux\project-spec\meta-user\recipes-bsp\embeddedsw\fsbl-firmware\git\lib\sw_apps\zynqmp_fsbl\src"

Applications

See "<project folder>\os\petalinux\project-spec\meta-user\recipes-apps\"

startup

Script App to load init.sh from SD Card if available.

webfwu

Webserver application suitable for Zynq access. Need busybox-httpd

Additional Software

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Page properties

hidden	true
id	Comments

Note:

Add description for other Software, for example SI CLK Builder ...
SI5338 and SI5345 also Link to:
- Si5345
- Si5338

SI5338

File location "<project folder>\misc\PLL\Si5338_B\Si5338-*.slabtimeproj"

General documentation how you work with this project will be available on Si5338

Appx. A: Change History and Legal Notices

Scroll Ignore

scroll-pdf	true
scroll-office	true
scroll-chm	true
scroll-docbook	true
scroll-eclipsehelp	true
scroll-epub	true
scroll-html	true

Document Change History

To get content of older revision go to "Change History" of this page and select older document revision number.

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro (date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

Scroll Title

anchor	Table_dch
title-alignment	center
title	Document change history.

Scroll Table Layout

orientation	portrait
sortDirection	ASC
repeatTableHeaders	default
widths	2,,3,4
sortByColumn	1
sortEnabled	false
cellHighlighting	true

Date

Document Revision

Authors

Description

Page info

infoType	Modified date
dateFormat	yyyy-MM-dd
type	Flat

Page info

infoType	Current version
prefix	v.
type	Flat

Page info

infoType	Modified by
type	Flat

update files
update linux documentation

2024-08-26

v.39

John Hartfiel

Release 2023.2
new assembly variants
design update(see design revision history)

2023-09-20

v.38

Manuela Strücker

Release 2022.2
new assembly variants

2022-10-17

v.36

Manuela Strücker

script update

2022-09-06

v.35

Manuela Strücker

new assembly variants

2022-07-15

v.33

Manuela Strücker

Release 2021.2

2021-09-09

v.29

Manuela Strücker

Release 2020.2
update document style

2020-04-06

v.28

John Hartfiel

new assembly variants

2020-03-25

v.27

John Hartfiel

script update

2020-02-25

v.26

John Hartfiel

Update requirement section

2020-01-23

v.25

John Hartfiel

Release 2019.2

2019-05-07

v.24

John Hartfiel

SDK template in ./sw_lib/sw_apps/ available.

zynqmp_fsbl

TE modified 2018.3 FSBL

General:

Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
Add Files: te_xfsbl_hooks.h/.c (for hooks and board)\n\
General Changes:
- Display FSBL Banner and Device Name

Module Specific:

Add Files: all TE Files start with te_*
- Si5338 Configuration
- OTG+PCIe Reset over MIO
- I2C MUX for EEPROM MAC

zynqmp_fsbl_flash

TE modified 2018.3 FSBL

General:

Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation

hello_te0803

Hello TE0803 is a Xilinx Hello World example as endless loop instead of one console output.

u-boot

U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.

Software Design - PetaLinux

Page properties

hidden	true
id	Comments

Note:

optional chapter separate
sections for linux
Add "No changes." or "Activate: and add List"

For PetaLinux installation and project creation, follow instructions from:

PetaLinux KICKstart

Config

Start with petalinux-config or petalinux-config --get-hw-description

Activate:

CONFIG_SUBSYSTEM_PRIMARY_SD_PSU_SD_1_SELECT=y
CONFIG_SUBSYSTEM_ETHERNET_PSU_ETHERNET_3_MAC=""

U-Boot

Start with petalinux-config -c u-boot
Changes:

CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_SPI_FLASH is not set

Change platform-top.h:

Code Block

language	js

#include <configs/platform-auto.h>
#define CONFIG_SYS_BOOTM_LEN 0xF000000

#define DFU_ALT_INFO_RAM \
                "dfu_ram_info=" \
        "setenv dfu_alt_info " \
        "image.ub ram $netstart 0x1e00000\0" \
        "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
        "thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO_MMC \
        "dfu_mmc_info=" \
        "set dfu_alt_info " \
        "${kernel_image} fat 0 1\\\\;" \
        "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \
        "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0"

/*Required for uartless designs */
#ifndef CONFIG_BAUDRATE
#define CONFIG_BAUDRATE 115200
#ifdef CONFIG_DEBUG_UART
#undef CONFIG_DEBUG_UART
#endif
#endif

/*Define CONFIG_ZYNQMP_EEPROM here and its necessaries in u-boot menuconfig if you had EEPROM memory. */
#define CONFIG_ZYNQMP_EEPROM
#ifdef CONFIG_ZYNQMP_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
#define CONFIG_CMD_EEPROM
#define CONFIG_ZYNQ_EEPROM_BUS          0
#define CONFIG_ZYNQ_GEM_EEPROM_ADDR     0x50
#define CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET  0xFA
#endif

Device Tree

Code Block

language	js

/include/ "system-conf.dtsi"
/ {
};
/* notes:
serdes: // PHY TYP see: dt-bindings/phy/phy.h
*/

/* default */

/* SD */

&sdhci1 {
	// disable-wp;
	no-1-8-v;

};

/*PCIE*/
&pcie {
     phys = <&lane0 2 0 2 100000000>;  //not recognized at the moment on linux
};

/* DP */ 
&zynqmp_dpsub {
    phys = <&lane3 5 0 3 27000000>; //Xilinx default is 5 (UFS), 6 (DP) does not work
};

/* SATA */

&sata {
    //phys = <&lane2 1 0 1 150000000>;  //TE0808,TE0807
    phys = <&lane2 1 0 0 150000000>; //TE0803
};


/* USB  */


&dwc3_0 {
    status = "okay";
    dr_mode = "host";
    snps,usb3_lpm_capable;
    snps,dis_u3_susphy_quirk;
    snps,dis_u2_susphy_quirk;
    phy-names = "usb2-phy","usb3-phy";
    phys = <&lane1 4 0 2 100000000>;
    maximum-speed = "super-speed";
};

/* ETH PHY */

&gem3 {
	phy-handle = <&phy0>;
	phy0: phy0@1 {
		device_type = "ethernet-phy";
		reg = <1>;
	};
};

/* QSPI */

&qspi {
    #address-cells = <1>;
    #size-cells = <0>;
    status = "okay";
    flash0: flash@0 {
        compatible = "jedec,spi-nor";
        reg = <0x0>;
        #address-cells = <1>;
        #size-cells = <1>;
    };
};

/* I2C */

&i2c0 {
    i2cswitch@73 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x73>;
        i2c-mux-idle-disconnect;

        i2c@2 { // PCIe
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // i2c SFP
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 { // i2c SFP
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { // i2c EEPROM
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
        };
        i2c@6 { // i2c FMC
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;

            si570_2: clock-generator3@5d {
                #clock-cells = <0>;
                compatible = "silabs,si570";
                reg = <0x5d>;
                temperature-stability = <50>;
                factory-fout = <156250000>;
                clock-frequency = <78800000>;
            };
        };
        i2c@7 { // i2c USB HUB
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <7>;
        };
    };
    i2cswitch@77 { // u
        compatible = "nxp,pca9548";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0x77>;
        i2c-mux-idle-disconnect;
        i2c@0 { // i2c PMOD
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <0>;
        };
        i2c@1 { // i2c Audio Codec
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <1>;
			/*
            adau1761: adau1761@38 {
                compatible = "adi,adau1761";
                reg = <0x38>;
            };
			*/
        };
        i2c@2 { // i2c FireFly A
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <2>;
        };
        i2c@3 { // i2c FireFly B
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <3>;
        };
        i2c@4 { // i2c PLL
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <4>;
        };
        i2c@5 { // i2c SC
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <5>;
        };
        i2c@6 { // i2c
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <6>;
        };
        i2c@7 { // i2c
            #address-cells = <1>;
            #size-cells = <0>;
            reg = <7>;
        };
    };
};

Kernel

Start with petalinux-config -c kernel

Changes:

CONFIG_CPU_IDLE is not set (only needed to fix JTAG Debug issue)
CONFIG_CPU_FREQ is not set (only needed to fix JTAG Debug issue)
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set (only needed to fix JTAG Debug issue)
CONFIG_EDAC_CORTEX_ARM64=y

Rootfs

Start with petalinux-config -c rootfs

Changes:

CONFIG_i2c-tools=y
CONFIG_busybox-httpd=y (for web server app)

Applications

startup

Script App to load init.sh from SD Card if available.

See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\files

webfwu

Webserver application accemble for Zynq access. Need busybox-httpd

Additional Software

Page properties

hidden	true
id	Comments

Note:

Add description for other Software, for example SI CLK Builder ...
SI5338 and SI5345 also Link to:
- Si5345
- Si5338

SI5338

File location <design name>/misc/Si5338/Si5338-*.slabtimeproj

General documentation how you work with these project will be available on Si5338

Appx. A: Change History and Legal Notices

Document Change History

To get content of older revision got to "Change History" of this page and select older document revision number.

Page properties

hidden	true
id	Comments

Note this list must be only updated, if the document is online on public doc!
It's semi automatically, so do following
- Add new row below first
- Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template
- Metadata is only used of compatibility of older exports

...

anchor	Table_dch
title	Document change history.

...

Authors

...

Page info

infoType	Current version
prefix	v.
type	Flat

...

Release 2018.3

2018-10-26

v.21

John Hartfiel

new assembly variant

2018-08-14

v.19

John Hartfiel

design update

2018-07-23

v.18

John Hartfiel

new assembly variant

2018-07-20

v.16

John Hartfiel

Release 2018.2

2018-05-17

v.14

John Hartfiel

new assembly variant
solved known issues

2018-04-30

v.13

John Hartfiel

Update known Issues

2018-04-11

v.12

John Hartfiel

bugfix board part files

2018-02-13

v.11

John Hartfiel

new assembly variant
solved known issues

2018-01-29

v.4

John Hartfiel

Update known Issues

2018-01-18

v.3

John Hartfiel

Release 2017.4

All

Page info

	modified-users
	modified-users

Legal Notices

Include Page

	IN:Legal Notices
	IN:Legal Notices

Scroll Only

HTML
<style> .wiki-content .columnLayout .cell.aside { width: 0%; }</style>

Scroll pdf ignore

Custom_fix_page_content

Trenz Electronic Documentation

Page History

Versions Compared

Old Version 23

New Version Current

Key

Table of contents

Overview

Key Features

Revision History

Release Notes and Know Issues

Overview

Key Features

Revision History

Release Notes and Know Issues

Requirements

Software

Requirements

Software

Hardware

Content

Hardware

Content

Design Sources

Additional Sources

Prebuilt

Download

Design Flow

Additional Sources

Prebuilt

Download

Design Flow

Launch

Programming

QSPI

SD

JTAG

Usage

Linux

Vivado Hardware Manager

System Design - Vivado

Block Design

PS Interfaces

Constrains

Basic module constrains

Design specific constrain

Software Design - SDK/HSI

Application

scu

srec_spi_bootloader

xilisf_v5_11

zynq_fsbl

zynq_fsbl_flash

zynqmp_fsbl

zynqmp_fsbl_flash

zynqmp_pmufw

hello_te0820

u-boot

Launch

Programming

Get prebuilt boot binaries

QSPI-Boot mode

SD-Boot mode

JTAG

Usage

Linux

Vivado Hardware Manager

System Design - Vivado

Block Design

PS Interfaces

Constrains

Basic module constrains

Design specific constrain

Software Design - Vitis

Application

scu

srec_spi_bootloader

xilisf_v5_11

fsbl

zynqmp_fsbl