Page History
Template Revision 2.4 - on construction
HTML |
---|
<!-- tables have all same width (web max 1200px and pdf full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
width: 100% !important;
max-width: 1200px !important;
}
</style> |
...
hidden | true |
---|---|
id | Comments |
Important General Note:
...
Export PDF to download, if vivado revision is changed!
Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro
...
Figure template (note: inner scroll ignore/only only with drawIO object):
...
anchor | Figure_xyz |
---|---|
title | Text |
Scroll Ignore |
---|
Create DrawIO object here: Attention if you copy from other page, use |
Scroll Only |
---|
image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed |
...
Table template:
- Layout macro can be use for landscape of large tables
- Set column width manually(can be used for small tables to fit over whole page) or leave empty (automatically)
...
anchor | Table_xyz |
---|---|
title | Text |
...
Scroll pdf ignore | ||||
---|---|---|---|---|
Table of contents
|
Overview
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Zynq PS Design with Linux Example and PHY status LED on Vivado HW-Manager.
Refer to http://trenz.org/te0712-info for the current online version of this manual and other available documentation.
Key Features
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Excerpt |
---|
|
...
...
- add every update file on the download
- add design changes on description
...
...
...
...
...
...
...
...
...
...
- TE Script update
- rework of the FSBLs
- some additional Linux features
...
te0720-test_board-vivado_2018.2-build_03_20180823185142.zip
te0720-test_board_noprebuilt-vivado_2018.2-build_03_20180823185158.zip
...
- DDR setup bugfix for l1if only
...
- 2018.2 update
- Boart Part Files rework
...
- new assembly variant
...
- add assembly variant
- script update
...
- no design changes
- set EEPROM MAC with FSBL+u-boot
- FSBL for QSPI Programming
...
- remove duplicated content
...
- initial release
Release Notes and Know Issues
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
...
anchor | Table_KI |
---|---|
title | Known Issues |
...
Requirements
Software
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
...
anchor | Table_SW |
---|---|
title | Software |
...
Hardware
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Basic description of TE Board Part Files is available on TE Board Part Files.
Complete List is available on <design name>/board_files/*_board_files.csv
Design supports following modules:
...
anchor | Table_HWM |
---|---|
title | Hardware Modules |
...
Design supports following carriers:
...
anchor | Table_HWC |
---|---|
title | Hardware Carrier |
...
- See restrictions on usage with 7 Series Carriers: 4 x 5 SoM Carriers
...
- See restrictions on usage with 7 Series Carriers: 4 x 5 SoM Carriers
- Used as reference carrier.
...
- See restrictions on usage with 7 Series Carriers: 4 x 5 SoM Carriers
...
- See restrictions on usage with 7 Series Carriers: 4 x 5 SoM Carriers
...
- See restrictions on usage with 7 Series Carriers: 4 x 5 SoM Carriers
- No SD Slot available, pins goes to Pin Header
- For TEBA0841 REV01, please contact TE support
Additional HW Requirements:
...
anchor | Table_AHW |
---|---|
title | Additional Hardware |
...
Content
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
For general structure and of the reference design, see Project Delivery
Design Sources
...
...
...
...
...
...
Additional Sources
...
anchor | Table_ADS |
---|---|
title | Additional design sources |
...
Prebuilt
...
hidden | true |
---|---|
id | Comments |
Notes :
...
...
...
...
...
...
...
...
...
...
Debian SD-Image
...
*.img
...
Debian Image for SD-Card
...
MCS-File
...
*.mcs
...
Flash Configuration File with Boot-Image (MicroBlaze or FPGA part only)
...
MMI-File
...
*.mmi
...
File with BRAM-Location to generate MCS or BIT-File with *.elf content (MicroBlaze only)
...
SREC-File
...
*.srec
...
Converted Software Application for MicroBlaze Processor Systems
...
anchor | Table_PF |
---|---|
title | Prebuilt files (only on ZIP with prebult content) |
...
...
File
...
File-Extension
...
Description
...
Debian SD-Image
...
*.img
...
Debian Image for SD-Card
...
Download
Reference Design is only usable with the specified Vivado/SDK/PetaLinux/SDx version. Do never use different Versions of Xilinx Software for the same Project.
Page properties | ||||
---|---|---|---|---|
| ||||
|
Reference Design is available on:
Design Flow
Page properties | ||||
---|---|---|---|---|
| ||||
Notes :
|
Note |
---|
Reference Design is available with and without prebuilt files. It's recommended to use TE prebuilt files for first lunch. |
Trenz Electronic provides a tcl based built environment based on Xilinx Design Flow.
See also:
The Trenz Electronic FPGA Reference Designs are TCL-script based project. Command files for execution will be generated with "_create_win_setup.cmd" on Windows OS and "_create_linux_setup.sh" on Linux OS.
TE Scripts are only needed to generate the vivado project, all other additional steps are optional and can also executed by Xilinx Vivado/SDK GUI. For currently Scripts limitations on Win and Linux OS see: Project Delivery Currently limitations of functionality
- _create_win_setup.cmd/_create_linux_setup.sh and follow instructions on shell:
- Press 0 and enter to start "Module Selection Guide"
- (optional Win OS) Generate Virtual Drive or use short directory for the reference design (for example x:\<design name>)
- Create Project (follow instruction of the product selection guide), settings file will be configured automatically during this process
- (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
Note: Select correct one, see TE Board Part Files
- (optional for manual changes) Select correct device and Xilinx install path on "design_basic_settings.cmd" and create Vivado project with "vivado_create_project_guimode.cmd"
- Create HDF and export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
Note: Script generate design and export files into \prebuilt\hardware\<short dir>. Use GUI is the same, except file export to prebuilt folder
- Run on Vivado TCL: TE::hw_build_design -export_prebuilt
- Create Linux (uboot.elf and image.ub) with exported HDF
- HDF is exported to "prebuilt\hardware\<short name>"
Note: HW Export from Vivado GUI create another path as default workspace. - Create Linux images on VM, see PetaLinux KICKstart
- Use TE Template from /os/petalinux
Note: run init_config.sh before you start petalinux config. This will set correct temporary path variable.
- Use TE Template from /os/petalinux
- HDF is exported to "prebuilt\hardware\<short name>"
- Add Linux files (uboot.elf and image.ub) to prebuilt folder
- "prebuilt\os\petalinux\default" or "prebuilt\os\petalinux\<short name>"
Notes: Scripts select "prebuilt\os\petalinux\<short name>", if exist, otherwise "prebuilt\os\petalinux\default"
- "prebuilt\os\petalinux\default" or "prebuilt\os\petalinux\<short name>"
- Generate Programming Files with HSI/SDK
- Run on Vivado TCL: TE::sw_run_hsi
Note: Scripts generate applications and bootable files, which are defined in "sw_lib\apps_list.csv" - (alternative) Start SDK with Vivado GUI or start with TE Scripts on Vivado TCL: TE::sw_run_sdk
Note: See SDK Projects
- Run on Vivado TCL: TE::sw_run_hsi
Launch
Programming
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Note |
---|
Check Module and Carrier TRMs for proper HW configuration before you try any design. |
Xilinx documentation for programming and debugging: Vivado/SDK/SDSoC-Xilinx Software Programming and Debugging
QSPI
Optional for Boot.bin on QSPI Flash and image.ub on SD.
- Connect JTAG and power on carrier with module
- Open Vivado Project with "vivado_open_existing_project_guimode.cmd" or if not created, create with "vivado_create_project_guimode.cmd"
- Type on Vivado TCL Console: TE::pr_program_flash_binfile -swapp u-boot
Note: To program with SDK/Vivado GUI, use special FSBL (zynq_fsbl_flash) on setup
optional "TE::pr_program_flash_binfile -swapp hello_te0720" possible - Copy image.ub on SD-Card
- Insert SD-Card
SD
- Copy image.ub and Boot.bin on SD-Card.
- For correct prebuilt file location, see <design_name>/prebuilt/readme_file_location.txt
- Set Boot Mode to SD-Boot.
- Depends on Carrier, see carrier TRM.
- Insert SD-Card in SD-Slot.
JTAG
Not used on this Example.
Usage
- Prepare HW like described on section 68616214
- Connect UART USB (most cases same as JTAG)
- Select SD Card as Boot Mode (or QSPI - depending on step 1)
Note: See TRM of the Carrier, which is used. - Power On PCB
Note: 1. Zynq Boot ROM loads FSBL from SD into OCM, 2. FSBL loads U-boot from SD into DDR, 3. U-boot load Linux from SD into DDR
Linux
- Open Serial Console (e.g. putty)
- Speed: 115200
- COM Port: Win OS, see device manager, Linux OS see dmesg |grep tty (UART is *USB1)
- Linux Console:
Note: Wait until Linux boot finished For Linux Login use:- User Name: root
- Password: root
- You can use Linux shell now.
- I2C 0 Bus type: i2cdetect -y -r 0
- I2C 1 Bus type: i2cdetect -y -r 1
- RTC check: dmesg | grep rtc
- ETH0 works with udhcpc
- USB: insert USB device
- Option Features
- Webserver to get access to Zynq
- insert IP on web browser to start web interface
- init.sh scripts
- add init.sh script on SD, content will be load automatically on startup (template included in ./misc/SD)
- Webserver to get access to Zynq
Vivado HW Manager
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Open Vivado HW-Manager and add VIO signal to dashboard (*.ltx located on prebuilt folder
Monitoring: PHY LED
Scroll Title | ||||
---|---|---|---|---|
| ||||
System Design - Vivado
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
Block Design
Scroll Title | ||||
---|---|---|---|---|
| ||||
PS Interfaces
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
...
Constrains
Basic module constrains
Code Block | ||||
---|---|---|---|---|
| ||||
#
# Common BITGEN related settings for TE0720 SoM
#
set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
set_property CONFIG_VOLTAGE 3.3 [current_design]
set_property CFGBVS VCCO [current_design |
Code Block | ||||
---|---|---|---|---|
| ||||
#
set_property BITSTREAM.CONFIG.UNUSEDPIN PULLUP [current_design] |
Design specific constrain
Code Block | ||||
---|---|---|---|---|
| ||||
#
# Constraints for System controller support logic
#
set_property PACKAGE_PIN K16 [get_ports PL_pin_K16]
set_property PACKAGE_PIN K19 [get_ports PL_pin_K19]
set_property PACKAGE_PIN K20 [get_ports PL_pin_K20]
set_property PACKAGE_PIN L16 [get_ports PL_pin_L16]
set_property PACKAGE_PIN M15 [get_ports PL_pin_M15]
set_property PACKAGE_PIN N15 [get_ports PL_pin_N15]
set_property PACKAGE_PIN N22 [get_ports PL_pin_N22]
set_property PACKAGE_PIN P16 [get_ports PL_pin_P16]
set_property PACKAGE_PIN P22 [get_ports PL_pin_P22]
#
# If Bank 34 is not 3.3V Powered need change the IOSTANDARD
#
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_P22]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_P16]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_N22]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_N15]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_M15]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_L16]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K20]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K19]
set_property IOSTANDARD LVCMOS33 [get_ports PL_pin_K16] |
Software Design - SDK/HSI
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For SDK project creation, follow instructions from:
Application
...
hidden | true |
---|---|
id | Comments |
----------------------------------------------------------
FPGA Example
todo..
----------------------------------------------------------
Zynq Example:
zynq_fsbl
TE modified 2018.3 FSBL
General:
- Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device ID
Module Specific:
- Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY
zynq_fsbl_flash
TE modified 2018.3 FSBL
General:
- Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
ZynqMP Example:
...
zynqmp_fsbl
TE modified 2018.3 FSBL
General:
- Modified Files: xfsbl_main.c, xfsbl_hooks.h/.c, xfsbl_board.h/.c(search for 'TE Mod' on source code)
- Add Files: te_xfsbl_hooks.h/.c (for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device Name
Module Specific:
- Add Files: all TE Files start with te_*
- Si5338 Configuration
- ETH+OTG Reset over MIO
zynqmp_fsbl_flash
TE modified 2018.3 FSBL
General:
- Modified Files: xfsbl_initialisation.c, xfsbl_hw.h, xfsbl_handoff.c, xfsbl_main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
zynqmp_pmufw
Xilinx default PMU firmware.
...
...
...
General Example:
hello_te0820
Hello TE0820 is a Xilinx Hello World example as endless loop instead of one console output.
u-boot
U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.
Template location: ./sw_lib/sw_apps/
zynq_fsbl
TE modified 2018.3 FSBL
General:
- Modified Files:main.c, fsbl_hooks.h/.c (search for 'TE Mod' on source code)
Add Files: te_fsbl_hooks.h/.c(for hooks and board)\n\
- General Changes:
- Display FSBL Banner and Device ID
Module Specific:
- Add Files: all TE Files start with te_*
- READ MAC from EEPROM and make Address accessible by UBOOT (need copy defines on uboot platform-top.h)
- CPLD access
- Read CPLD Firmware and SoC Type
- Configure Marvell PHY
zynq_fsbl_flash
TE modified 2018.3 FSBL
General:
- Modified Files: main.c
- General Changes:
- Display FSBL Banner
- Set FSBL Boot Mode to JTAG
- Disable Memory initialisation
hello_te0720
Hello World App in Endless loop.
u-boot
U-Boot.elf is generated with PetaLinux. SDK/HSI is used to generate Boot.bin.
Software Design - PetaLinux
Page properties | ||||
---|---|---|---|---|
| ||||
Note:
|
For PetaLinux installation and project creation, follow instructions from:
Config
Start with petalinux-config or petalinux-config --get-hw-description
Changes:
- CONFIG_SUBSYSTEM_SERIAL_PS7_UART_0_SELECT=y
- CONFIG_SUBSYSTEM_SERIAL_IP_NAME="ps7_uart_0"
U-Boot
Start with petalinux-config -c u-boot
Changes:
- CONFIG_ENV_IS_NOWHERE=y
- # CONFIG_ENV_IS_IN_SPI_FLASH is not set
Change platform-top.h:
...
language | js |
---|
...
...
...
...
...
...
...
...
Device Tree
Code Block | ||
---|---|---|
| ||
/include/ "system-conf.dtsi"
/ {
};
/* default */
/* QSPI PHY */
&qspi {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
flash0: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
#address-cells = <1>;
#size-cells = <1>;
};
};
/* ETH PHY */
&gem0 {
phy-handle = <&phy0>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@0 {
compatible = "marvell,88e1510";
device_type = "ethernet-phy";
reg = <0>;
};
};
};
/* USB PHY */
/{
usb_phy0: usb_phy@0 {
compatible = "ulpi-phy";
//compatible = "usb-nop-xceiv";
#phy-cells = <0>;
reg = <0xe0002000 0x1000>;
view-port = <0x0170>;
drv-vbus;
};
};
&usb0 {
dr_mode = "host";
//dr_mode = "peripheral";
usb-phy = <&usb_phy0>;
};
/* I2C need I2C1 connected to te0720 system controller ip */
&i2c1 {
iexp@20 { // GPIO in CPLD
#gpio-cells = <2>;
compatible = "ti,pcf8574";
reg = <0x20>;
gpio-controller;
};
iexp@21 { // GPIO in CPLD
#gpio-cells = <2>;
compatible = "ti,pcf8574";
reg = <0x21>;
gpio-controller;
};
rtc@6F { // Real Time Clock
compatible = "isl12022";
reg = <0x6F>;
};
}; |
Kernel
Start with petalinux-config -c kernel
Changes:
- CONFIG_RTC_DRV_ISL12022=y
Rootfs
Start with petalinux-config -c rootfs
Changes:
- CONFIG_i2c-tools=y
- CONFIG_busybox-httpd=y (for web server app)
Applications
startup
Script App to load init.sh from SD Card if available.
See: \os\petalinux\project-spec\meta-user\recipes-apps\startup\files
webfwu
Webserver application accemble for Zynq access. Need busybox-httpd
Additional Software
Page properties | ||||
---|---|---|---|---|
| ||||
Note: |
No additional software is needed.
Appx. A: Change History and Legal Notices
Document Change History
To get content of older revision got to "Change History" of this page and select older document revision number.
Page properties | ||||
---|---|---|---|---|
| ||||
|
...
anchor | Table_dch |
---|---|
title | Document change history. |
...
...