Page History

Example of porting to a different module

The supplied reference designs were built for typical TE0300, TE0320 and TE0630. Normally, you don't need to port the reference design.

If the module used are slightly different from typical, you can use the following example as a guide to port the design to your board.

...

The supplied reference designs design of the example were built for typical TE0300-01 which uses a 125MHz oscillator and a Spartan-3E XC3S1200E-4FG320 FPGA. Other module assembly versions are listed in the table below.

...

...

To change the FPGA device, you should

• open the project in Xilinx Platform Studio;
• click on the "Project" tab;
• under "Project Options" double click on "Device";
• select a suitable FPGA device.

...