Versions Compared

Old Version 3

changes.mady.by.user Sergio Pavesi

Saved on

compared with

New Version Current

changes.mady.by.user Sergio Pavesi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin

Open CyControl

Note

The firmware actually changes (it runs on USB FX2 microcontroller's RAM) only when

  • you reset the TE USB FX2 module;
  • you power off and power on the TE USB FX2 module;
  • you write the USB FX2 microcontroller's RAM (but the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle).

...

After this one of this two windows appears.

Scroll pdf title
titleStartCyControl starts
Recovery bootImage Modified
Update/normal bootImage Modified

RAM programming

...

Note

The RAM can be programmed even if EEPROM switch is disabled.

If you don't also write the IIC EEPROM  ("Program>FX2 64KB EEPROM"), the new firmware is lost if the TE USB FX2 module goes under reset or power off/on cycle.

...

EEPROM programming

To program the Large (64K) EEPROM you should click "Program FX2" and select "64KB EEPROM". Then you should select the .iic file to download.

...