Versions Compared

Old Version 3

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

Overview

The Trenz Electronic TE0xxx-xx ... is an industrial-grade ... module ... based on Xilinx ...TEBT0782 is a carrier for TE0782, TE0783 and TE0784 module.

Refer to http://trenz.org/tec0850tebt0782-info for the current online version of this manual and other available documentation.

...

Page properties
hiddentrue
idComments

Note:
 'Key Features' description: Important components and connector or other Features of the module
→ please sort and indicate assembly options

  • 3 x Samtec ASP-122953-01 160-pin stackable, compatible with TE078x
  • 2 mm MC LB2-A Soldered Connector for power supply (12V input)
  • 4 SMA connectors for MGT
  • 2 x 12 pin headers for XMOD
  • 1 x DIP switch for modules CPLD Access
  • 2 x RJ45 Connector
  • USB A Stacked Connector 
  • Equipped with two TE0790 XMOD FTDI JTAG adapters
  • Voltage regulators
  • Dimension: 115 x 115 mm
  • ...
  • ....
  • ....

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTExxxx TEBT0782 block diagram


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision112
diagramNameTEBT0782_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only

Image Modified


Main Components

...

Scroll Title
anchorFigure_OV_MC
titleTExxxx TEBT0782 main components


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision18
diagramNameTEBT0782_OV_MC
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641440


Scroll Only

Image Modified

  1. ...
  2. ...
  3. ...

Initial Delivery State


  1. RJ45 Transceivers, J1-J2
  2. USB A Stacked, U7
  3. XMOD JTAG/UART Adapter, J7
  4. JTAG CPLD Adapter -J8
  5. 2 Line Common Mode Choke, J10
  6. Non-isolated power jack (VIN), J9-J11
  7. DIP Switch, S1
  8. SMA Coxial Connectors (MGT_TX), J3-J4
  9. SMA Coxial Connectors (MGT_RX), J5-J6
  10. Board to Board Connector, JB1
  11. Board to Board Connector, JB3
  12. Board to Board Connector, JB2

Initial Delivery State

Page properties
hiddentrue
idComments
Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage device name

Content

Notes

Quad SPI Flash-

EEPROM-DDR3 SDRAMSystem Controller CPLD

-


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

The general Reset is provided through button S1 on TE0790 XMOD J7.

Scroll Title
anchorTable_OV_BPRST
titleBoot Reset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE

Signal

State

B2B
Boot Mode
Scroll Title
anchorTable_OV_RST
titleReset process.
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2BI/ONote
Note

RESIN

JBC3-130Board Reset


Signals, Interfaces and Pins

Page properties
hiddentrue
idComments

Notes :

  • For carrier or stand-alone boards use subsection for every connector type (add designator Designator on description, not on the subsection title), for example:
    • SD
    • USB
    • ETH
    • FMC
    • ...
  • For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
    • JTAG
    • UART
    • I2C
    • MGT
    • ...

...

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA Bank

B2B ConnectorInterfaceNumber of I/O
Signal Count
Voltage Level
Notes
Notes

...

JTAG access to the TExxxx SoM through B2B connector JMX.

...

anchorTable_SIP_JTG
titleJTAG pins connection

...

JTAG Signal

...

B2B Connector

...

MIO Pins

...

hiddentrue
idComments

you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic.

Example:

JB1








RJ45, J1B-J1C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J1A4 Differential pair, 8 Single EndedPHY1 MDIO
RJ45, J2B-J2C1 Differential pair, 2 Single EndedYellow, Green LEDs
RJ45, J2A4 Differential pair, 8 Single EndedPHY2 MDIO
TE0790 Base, J84 Single Ended
TE0790 Base, J71 Single Ended
USB A Stacked, U72 Single EndedUSB
Power Switch, U12 Single Ended
SMD Line Filter, L61 Differential pair, 2 Single EndedUSB1_D
SMD Line Filter, L71 Differential pair, 2 Single EndedUSB2_D
ESD protection diode, U51 Single EndedUSB1_VBUS
ESD protection diode, U81 Single EndedUSB2_VBUS
JB2

Module TE078x FPGA, Bank 111-11216 Differential pair, 32 Single EndedMGT_RX8...15, MGT_TX8...15
Module TE078x FPGA, Bank 341 Differential pair, 2 Single Ended

J1_B34_VRP, J1_B34_VRN

Module TE078x FPGA, Bank 341 Differential pair, 2 Single EndedJ1_B33_VRP, J1_B33_VRN
JB3



TE0790 Base, J84 Single EndedM_TCK, M_TMS, M_TDO, M_TDI
TE0790 Base, J7

4 Single Ended

2 Single Ended

1 Single Ended

TCK, TMS, TDO, TDI

UART RX/TX

RESIN

DIP Switch, S1-A1 Single EndedJTAGENB
SMA Coaxial, J3...62 Differential pair, 4 Single EndedMGT_RX0, MGT_TX0
Module TE0782...4 FPGA, Bank 109-11016 Differential pair, 32 Single EndedMGT_RX1...7, MGT_TX0...7


XMOD Pin Header

JTAG/UART to Module SoC/FPGA

JTAG access to the TE078x SoM is available through B2B connector JB3.  JTAG access is provided by TE0790 XMOD Adapter on Pin Header J7.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirection

...

SPI_CS , SPI_DQ0... SPI_DQ3

SPI_SCK

...

anchorTable_OBP_MIOs
titleMIOs pins

...

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs
Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/

JTAG Interface Pins

Designator
Signal Name

B2B Connector

Notes

Quad SPI Flash Memory

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options.

...

anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pins
AXMOD_AJB3C-129UART
BXMOD_BJB3C-135UART
CTCKJB3C-141JTAG
DTDOJB3C-148JTAG
ECPLD_GPIO4JB1A-18
FTDIJB3C-147JTAG
GRESINJB3C-130General Reset
HTMSJB3C-142JTAG
3.3V3.3V_MJB1- JB3
VIO3.3V_MJB1- JB33.3V


JTAG/ GPIO to Module CPLD

JTAG access to the System Controller CPLD is provided through B2B connector J3. JTAG access to CPLD is provided by TE0790 XMOD Adapter on Pin Header J8.

Pin 'JTAGENB' must be set high, using DIP Switch S1-A in order to program the System Controller CPLD via JTAG interaface.

Scroll Title
anchorTable_SIP_CPLDJTG
titleCPLD JTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Interface Pins

Signal Name

B2B Connector

Notes
ACPLD_GPIO0JB1A-10
BCPLD_GPIO1JB1A-12
CM_TCKJB3B-81
DM_TDOJB3B-88
ECPLD_GPIO2JB1A-14
FM_TDIJB3B-87
GCPLD_GPIO3JB1A-16
HM_TMSJB3B-82
3.3V3.3V_CPLDJB1- JB3
VIO3.3V_CPLDJB1- JB33.3V


DIP Switch S2 on TE0790 must be set and fixed like the following table.

Scroll Title
anchorTable_SIP_JTG_DIP
titleXMOD DIP Switch Setting

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP Switch

SettingNotes
S2-1ONJTAGENB (Enable/Disable module JTAG CPLD IOs)
S2-2OFFNC
S2-3OFFNC
S2-4OFFNC


RJ45 Connectors

Scroll Title
anchorTable_SIP_RJ45
titleRJ45s Connections to B2B Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NameRJ45-J1 PinRJ45-J2 PinNotes
B2B
PHY_MDI0_PJB1A-23JB1A-39
PHY_MDI0_NJB1A-21JB1A-37
PHY_MDI1_PJB1A-19JB1A-35
PHY_MDI1_NJB1A-17JB1A-33
PHY_MDI2_PJB1A-15JB1A-31
PHY_MDI2_NJB1A-13JB1A-29
PHY_MDI3_PJB1A-11JB1A-27
PHY_MDI3_NJB1A-9JB1A-25
J2_TX9_PJB1A-95-LED Green/Yellow
J2_TX9_NJB1A-97-LED Green/Yellow
J2_RX9_N-JB1A-96LED Green/Yellow
J2_RX9_P-JB1A-98LED Green/Yellow


USB A Stacked Socket

The USB A Stacked (U7) is a dual port USB Socket which provides two USB ports.

Scroll Title
anchorTable_SIP_USB
titleDual Port USB Connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal NamePort APort BNotes
B2BConnected to B2BConnected to 
USB_D_PJB1A-28SMD Line Filter, L7JB1A-40SMD Line Filter, L6
USB_D_NJB1A-26SMD Line Filter, L7JB1A-38SMD Line Filter, L6
USB_VBUSJB1A-24SMD Line Filter, L7JB1A-36SMD Line Filter, L6
VBUS_V_ENJB1A-30Power Switch, U1 JB1A-32Power Switch, U1 


SMA Coaxial 

The TEBT0782 carrier is equipped with 4x SMA Coaxial straight connectors.

Scroll Title
anchorTable_SIP_SMA
titleSMAs Connections

...

Scroll Title
anchorTable_OBP_RTC
titleI2C interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO Pin
Designator Schematic
U? Pin
B2BNotes
Scroll Title
anchorTable_OBP_I2C_RTC
titleI2C Address for RTC
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
MIO PinI2C AddressDesignatorNotes

...

J3MGT_TX0_NJB3A-29Transfer
J4MGT_TX0_PJB3A-31Transfer
J5MGT_RX0_NJB3A-30Receive
J6MGT_RX0_PJB3A-32Receive


Test Points

Scroll Title
anchorTable_OBPSIP_EEPTestPoint
titleI2C EEPROM interface MIOs and pinsTest Points Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicU?? PinNotes
Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
MIO PinI2C AddressDesignatorNotes

LEDs

...

anchorTable_OBP_LED
titleOn-board LEDs

Test Point

Signals

B2B Connector

Notes
TP 1VBAT_IJB3-124
TP 2OTG2_IDJB1-22
TP 3OTG1_IDJB1-34
TP 4USB1_VBUSJB1-36
TP 5USB2_VBUSJB1-24
TP 6M_TCKJB3-81
TP 7M_TDOJB3-88
TP 8M_TDIJB3-87
TP 9M_TMSJB3-82
TP 10TCKJB3-141
TP 11TDOJB3-148
TP 12TDIJB3-147
TP 13TMSJB3-142
TP 14VINJB1-165...168
TP 155V-
TP 163.3V_CPLDJB1-147...148
TP 17-18GND-


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection

...

DDR3 SDRAM

Page properties
hiddentrue
idComments

Notes :

Minimum and Maximum density of DDR3 SDRAM must be mentioned for other assembly options. (pay attention to supported address length for DDR3)

The TE???? SoM has ??? GByte volatile DDR3 SDRAM IC for storing user application code and data.

  • Part number: 
  • Supply voltage:
  • Speed: 
  • NOR Flash
  • Temperature: 

...


Scroll Title
anchorTable_OBP_ETH
titleEthernet PHY to Zynq SoC connectionsOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

BankSignal NameETH1ETH2Signal Description

...

Chip/InterfaceDesignatorNotes
DIP SwitchS1


DIP Switch

Scroll Title
anchorTable_OBP_CANDIP
titleCAN Tranciever interface MIOsDIP Switch Connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

BankSchematicU?? PinNotes
D-TxDriver InputR-RxReciever Output

...

1
sortEnabledfalse
cellHighlightingtrue

SwitchConnected to B2BNotes
S1-AJTABENBJB3C-136
S1-B...D--Not connected


Power and Power-On Sequence

Page properties
hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit


Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .


Power Supply

Power supply with minimum current capability of 3A for system startup is recommended.

Power Consumption

Scroll Title
anchorTable_OBPPWR_CLKPC
titleOsillatorsPower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorDescriptionFrequencyNote
MHzMHzKHz

Power and Power-On Sequence

...

hiddentrue
idComments

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Power Input PinTypical Current
VINTBD*


* TBD - To Be Determined

Power Distribution Dependencies

12V power supply (VIN) on J9/J11 (2 mm MC LB2-A solder-in) or on J10 (TE1.5/2-3.5H).

Power Supply

Power supply with minimum current capability of xx A for system startup is recommended.

Power Consumption

Scroll Title
anchorTableFigure_PWR_PCPD
titlePower ConsumptionDistribution


scroll-
tablelayout
ignore
orientation
scroll-pdf
portrait
false
sortDirection
scroll-office
ASC
true
repeatTableHeaders
scroll-chm
default
true
style
scroll-docbook
widths
true
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
Power Input PinTypical Current
VINTBD*

* TBD - To Be Determined

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Distribution
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision7
diagramNameTEBT0784_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only

Image Added


Power-On Sequence

Power-On Sequence

...

anchorFigure_PWR_PS
titlePower Sequency
Scroll Ignore

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed

...

Scroll Title
anchorFigure_PWR_VMCPS
titleVoltage Monitor CircuitPower Sequency


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision9
diagramNameTEBT0782_PWR_PS
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641


Scroll Only

Image Added

Create DrawIO object here: Attention if you copy from other page, objects are only linked.

Scroll Only

image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf export bug is fixed


Power Rails

Scroll Title
anchorTable_PWR_PR
titleModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue


Power Rail Name

B2B

ConnectorJM1

JB1 Pin

B2B

ConnectorJM2

JB2 Pin

B2B Connector

JM3

B2B JB3 Pin

DirectionNotes

Bank Voltages

Notes
VIN165, 166, 167, 168--Input/OutputDirectly to module
3.3V_M99, 100, 111,112, 123, 124, 135, 136, 159, 160, 169, 170, 171, 172-99, 100, 159, 160Input/Output160, 169, 170, 171, 172 are output other ones input for IO Banks
3.3V_CPLD147,148--OutputDirectly to module
1.8V_M-99,100, 159, 160, 169, 170, 171, 172124Input/Output169, 170, 171, 172 are output other ones input for IO Banks
VBAT_IN
Scroll Title
anchorTable_PWR_BV
titleZynq SoC bank voltages.
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Bank          

Schematic Name

Voltage







Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.

  • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors

    Include Page
    PD:6 x 6 SoM LSHM B2B ConnectorsPD:
    6 x 6 SoM LSHM B2B Connectors

? x ? modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

3 x REF-??????? (compatible to ????????), (?? pins, ?? per row)

  • Connectors

Include Page
8.5 x 8.5 SoM QSH and QTH B2B Connectors
8.5 x 8.5 SoM QSH and QTH B2B Connectors

...

Technical Specifications

Absolute Maximum Ratings

Scroll Title
anchorTable_TS_AMR
titlePS absolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnit
VVVVVVVV
Note
VINInput supply voltage----V

Attention: Depends on connected module!

171050601 of the TEBT0782  (-0,3V - 40V)

T_STGStorage Temperature-40+85°CDIP Switch S1


Recommended Operating Conditions

...

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ParameterMinMaxUnitsReference Document
VSee ???? datasheets.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.VSee Xilinx ???? datasheet.°CSee Xilinx ???? datasheet.
VIN11.412.6V

Attention: Depends on connected module! See TE078x TRMs, recommended normally 12V

Without module: 171050601 of the  TEBT0782  (6V - 36V)

T_OPT-40+85°C
°CSee Xilinx ???? datasheet.