...
Page properties |
---|
|
Note for Download Link of the Scroll ignore macro: |
Scroll pdf ignore |
---|
Table of Contents |
Overview
The Trenz Electronic TEF0003 is A a FPGA Mezzanine Card (FMC) integrated with a an Artix 7 FPGA, 512 Mb Flash Memory.
Refer to http://trenz.org/tef0003-info for the current online version of this manual and other available documentation.
Key Features
Page properties |
---|
|
Note: 'description: Important components and connector or other Features of the module → please sort and indicate assembly options Key Features' must be split into 6 main groups: - FPGA/Module
- Package:
- Speed:
- Temperature:
- RAM/Storage
- On Board
- Interface
- E.g. ETH, USB, B2B, Display port
- Power
- E.g. Input supply voltage
- Dimension
|
- FPGA: Xilinx Artix 7 (XC7A100T)
- Package: FGG484 (Compatible with
- Speed: -1 (Slowest)
- Temperature: Industrial Grade (–40°C to +100°C)
- RAM/Storage:
- 1x NOR SPI FLASH (128M x 4)
- 1x EEPROM (16K x 8)
- On Board:
- 4x Deserializer IC (3.12 Gbps)
- 4x I2C and SMBus I/O Expander
- 1x Programable Clock Generator
- 1x Clock Generator
- Interface:
- 2x VITA 57 SEAM/SEAF Series systemSeries
- 4x Coaxial connectorsConnectors
- Power:
- 4x Voltage Regulators
- 3.3 Supply Voltage
- Dimension:
Block Diagram
Page properties |
---|
|
add drawIO object here.
|
...
Scroll Title |
---|
anchor | Figure_OV_BD |
---|
title | TEF0003 block diagram |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 912 |
---|
diagramName | TEF0003_OV_BD |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 641 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Main Components
Page properties |
---|
|
Notes : - Picture of the PCB (top and bottom side) with labels of important components
- Add List below
|
...
Scroll Title |
---|
anchor | Figure_OV_MC |
---|
title | TEF0003 main components |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 7 |
---|
diagramName | TEF0003_OV_MC |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 641 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
- Coaxial Connectors, J2-5
- SPI Flash, U9
- Xilinx Artix 7 FPGA, U1
- Lattice MachXO FPGA, U15
- FMC Adapter, J1
- EEPROM, U4
- I2C Switches, U2, U17-20
- Jumper, J7
- Serializer, U5-8
- Connector Header, J8
- Oscillator 25MHz, U11
- Programmable Clock Generator, U10
- FMC Adapter, J6
Initial Delivery State
Page properties |
---|
|
Notes : Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture. If there is no components which might have initial data ( possible on carrier) you must keep the table empty |
...
Scroll Title |
---|
anchor | Table_OV_IDS |
---|
title | Initial delivery state of programmable devices on the module |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Storage device name | Content | Notes |
---|
SPI Flash | Not programmed |
| EEPROM | Not Programmed |
| Clock Generator | Programmed |
|
|
Configuration Signals
Page properties |
---|
|
- Overview of Boot Mode, Reset, Enables.
|
...
Scroll Title |
---|
anchor | Table_OV_RST |
---|
title | Reset Process. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Signal | Description | Note |
---|
PRSNT_TOP | Lattice MachXO Configuration Pin |
| PROG_B | Artix 7 Configuration Pin | , Connected Pulled up to 1.8 |
|
Signals, Interfaces and Pins
Page properties |
---|
|
Notes : - For carrier or stand-alone boards use subsection for every connector type (add designator on description, not on the subsection title), for example:
- For modules which needs carrier use only classes and refer to B2B connector if more than one is used, for example
|
...
FMC Connectors
FPGA bank number and number of I/O signals connected to the B2B connector:the FMC Connectors J1 and J6 which are located on top and bottom of the board.
Scroll Title |
---|
anchor | Table_SIP_B2BFMC |
---|
title | General PL I/O to B2B connectors FMC Connectors information |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
FPGA | FPGA Bank | Connector Designator | I/O Signal Count | Voltage Level | Notes |
---|
Artix 7, U1 | 16 | J1B | 68 Single Ended, 34 Differential | 1.8V |
| 35 | J6B | 68 Single Ended, 34 Differential | 1.8V |
| Lattice MachXO, U | 0 | J1F | 4 Single Ended | 3.3V | CPLD | 0 | J6F | 4 Single Ended | 3.3V |
|
...
Coaxial Connectors
The Lattice MachXO (U15) is available to meet the requirement of a CPLD, JTAG access to the MachXO is available through FMC Adapter J6. JTAG access to the Artix 7(U1) is available via MachXO, Bank 2.
scroll-title |
---|
anchor | Table_SIP_CPLDJTGCoaxial |
---|
title | CPLD JTAG pins connectionCoaxial Connectors information |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
JTAG Signal | B2B Connector |
---|
FMC_TMS | J6F-TCK |
FMC_TDI_TOP | J6F-J1-TDI |
FMC_TDO_TOP | J6F-TDO |
FMC_TCK | J6F-TCK |
JTAGEN | J7 |
Scroll Title |
---|
Designator | Schematic | Connected to | Notes |
---|
J2 | GA_OUT | Serializer, U5 |
| J3 | GB_OUT | Serializer, U6 |
| J4 | GC_OUT | Serializer, U7 |
| J5 | GD_OUT | Serializer, U8 |
|
|
JTAG Interface
The Lattice MachXO (U15) is available to meet the requirement of a CPLD, JTAG access to the MachXO is available through FMC Adapter J6. JTAG access to the Artix 7(U1) is available via MachXO, Bank 2.
Scroll Title |
---|
anchor | Table_SIP_CPLDJTG |
---|
title | CPLD JTAG pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection |
---|
|
|
anchor | Table_SIP_JTG |
---|
title | JTAG pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Connected toNoteNotes |
---|
FMC_TMS | J6F-TCK |
| FMC_TDI_TOP | J6F-J1-TDI |
| FMC_TDO_TOP | J6F-TDO |
| FMC_TCK | J6F-TCK |
| JTAGEN | Pulled down |
|
|
Scroll Title |
---|
anchor | Table_SIP_JTG |
---|
title | JTAG pins connection |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
JTAG Signal | Connected to | Note |
---|
TMS | Lattice MachXO, U15 BankArtix 7 FPGA, U1 | Bank 2 Bank 0 | TDI | Lattice MachXO, U15 Artix 7 FPGA, U1 | Bank 2 Bank 0 | TDO | Lattice MachXO, U15 Artix 7 FPGA, U1 | Bank 2 Bank 0 | TCK | Lattice MachXO, U15 BankArtix 7 FPGA, U1 | Bank 2 Bank 0 INIT | TDI | Lattice MachXO, U15 Artix 7 FPGA, U1 | Connected to 1.8 |
|
MIO Pins
Bank 2 Bank 0 | TDO | Lattice MachXO, U15 Artix 7 FPGA, U1 | Bank 2 Bank 0 | TCK | Lattice MachXO, U15 Artix 7 FPGA, U1 | Bank 2 Bank 0 | INIT | Artix 7 FPGA, U1 | Pulled up to 1.8 |
|
Page properties |
---|
|
you must fill the table below with group of MIOs which are connected to a specific components or peripherals, you do not have to specify pins in B2B, Just mention which B2B is connected to MIOs. The rest is clear in the Schematic. Example: MIO Pin | Connected to | B2B | Notes |
---|
MIO12...14 | SPI_CS , SPI_DQ0... SPI_DQ3 SPI_SCK | J2 | QSPI
|
On-board Peripherals
Page properties |
---|
|
Notes : - add subsection for every component which is important for design, for example:
- Two 100 Mbit Ethernet Transciever PHY
- USB PHY
- Programmable Clock Generator
- Oscillators
- eMMCs
- RTC
- FTDI
- ...
- DIP-Switches
- Buttons
- LEDs
|
...
Scroll Title |
---|
anchor | Table_OBP |
---|
title | On board peripherals |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
Quad SPI Flash Memory
Page properties |
---|
|
Notes : Minimum and Maximum density of quad SPI flash must be mentioned for other assembly options. |
TEF0003 is equipped with a 512Mb Serial NOR Flash (x1/x2/x4) which is provided to store an application on in the SPI Flash memory in order to boot the module. The SPI Flash data is connected to Artix 7 FPGBA via FPGA Bank 14.
Scroll Title |
---|
anchor | Table_OBP_SPI |
---|
title | Quad SPI interface MIOs and pins |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Schematic | U9 Pin | Notes |
---|
SPI-CS | CS |
| SPI-CLK | CLK |
| SPI-DQO | DI/IO0 |
| SPI_DQ3 | HOLD/IO3 |
| SPI-DQ2 | WP/IO2 |
| SPI-DQ1 | DO/IO1 |
| 1.8V | VCC |
|
|
EEPROM
A Microchip 24LC128-I/LC microchip serial EEPROM (U4) is provided for IPMI data. It is accessible via the LPC FMC connector J1 (SCL, SDA).
Scroll Title |
---|
anchor | Table_OBP_EEP |
---|
title | I2C EEPROM interface MIOs and pins |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
U4 Pin | FMC Pcam Adapter | Schematic |
---|
U4 PinNotesSCLSDAA0A1
| A2 | - | - | Pulled Low | WP | - | - | Pulled Low |
|
Scroll Title |
---|
anchor | Table_OBP_I2C_EEPROM |
---|
title | I2C address for EEPROM |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
I2C Address | Designator | Notes |
---|
0x500xA0 | U4 | Write operations are enabled |
|
Clock Sources
Scroll Title |
---|
anchor | Table_OBP_CLK |
---|
title | Osillators |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Designator | Description | Frequency | Note |
---|
U4U11 | Oscillator, | 25 MHz.00 MHz | MHz |
| U10 | Programmable Clock Generator | MHzVariable |
|
|
Programmable Clock Generator
There is a Silicon Labs I2C programmable clock generator on-board (U10) in order to generate reference clocks for the module. Programming can be done using I2C via PIN header J8. The I2C Address is 0x69.
Scroll Title |
---|
anchor | Table_OBP_PCLK |
---|
title | Programmable Clock Generator Inputs and Outputs |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Si5345A Pin
| Signal Name / Description
| Connected To | Direction | Note |
---|
IN0 | Reference input clock. | U11 | Input | 25.00 MHz oscillator, SiT8008BI | IN1 | FMCT_GBTCLK0 | J6E | Input | FMC Pcam Adapter | IN2 | FMCT_GBTCLK1 | J6E | Input | FMC Pcam Adapter | IN3 | FMCT_CLK0 | J6E | Input | FMC Pcam Adapter | XAXB | - | GND | Input | 54.0000 00 MHz XTAL CX3225SB | SCLK | PLL_SCL | J8, U20 | Input | EEPROM Programming | SDA | PLL_SDA | J8, U20 | Input | EEPROM Programming | OUT0 | GA_PCLK | U5/U1 | Output | FPGA bank 15 | OUT1 | GB_PCLK | U6/U1 | Output | FPGA bank 15 | OUT2 | GC_PCLK | U7/U1 | Output | FPGA bank 15 | OUT3 | GD_PCLK | U8/U1 | Output | FPGA bank 15 | OUT4 | CLK4_P | U1H | Output |
| OUT5 | GBTCLK0 | J1E/J6E | Output |
| OUT6 | GBTCLK1 | J1E/J6E | Output |
| OUT7 | GBTCLK0 | J1E | Output |
| OUT8/OUT9 | CLK8/CLK9 | Not ConnetedPulled low | OutputNot Used |
|
|
Power and Power-On Sequence
Page properties |
---|
|
In 'Power and Power-on Sequence' section there are three important digrams which must be drawn: - Power on-sequence
- Power distribution
- Voltage monitoring circuit
|
Power Supply
Power supply with minimum current capability of 3 A for system startup is recommended.
Power Consumption
Scroll Title |
---|
anchor | Table_PWR_PC |
---|
title | Power Consumption |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Input Pin | Typical Current |
---|
VIN3P3V | TBD* |
|
* TBD - To Be Determined
Power Distribution Dependencies
Scroll Title |
---|
anchor | Figure_PWR_PD |
---|
title | Power Distribution |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 47 |
---|
diagramName | TEF0003_PWR_PD |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 641 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Power-On Sequence
Scroll Title |
---|
anchor | Figure_PWR_PS |
---|
title | Power Sequency |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 12 |
---|
diagramName | TEF0003_PWR_PS |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 641 |
---|
|
|
Scroll Only |
---|
Image Modified |
|
Power Rails
Scroll Title |
---|
anchor | Table_PWR_PR |
---|
title | Module power rails. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Power Rail Name | FMC Adapter J1G Pin | FMC Adapter J6G Pin | Direction | Notes |
---|
12V | C35, C37 | C35, C37 | Input |
| 3P3VAUX | D32 | D32 | Input |
| 3P3V | D36, D38, D40, C39 | D36, D38, D40, C39 | Input |
| VREFA | H1 | H1 | Input |
| VREFB | K1 | K1 | Input |
| VIOB | J39, K40 | J39, K40 | Input |
| VADJ | H40, G39, F40, E39 | H40, G39, F40, E39 | Input |
|
|
Bank Voltages
Scroll Title |
---|
anchor | Table_PWR_BV |
---|
title | Zynq SoC bank voltages. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
| Schematic Name | | Notes |
---|
Bank 13 | VCCO_13 | 1.8 V |
| Bank 14 | VCCO_14 | 1.8 V |
| Bank 15 | VCCO_15 | 1.8 V |
| Bank 16 | VCCO_16 | VADJ | Bank 34 | VCCO_34 | 1.8 V | Bank 34 | VCCO_35 | VADJ | Bank 0 | VCCO_0 | 1.8 V |
|
Board to Board Connectors
| VCCO_34 | 1.8 V |
| Bank 35 | VCCO_35 | VADJ | 1.8 V | Bank 0 | VCCO_0 | 1.8 V |
|
Page properties |
---|
|
This section is optional and only for modules. use "include page" macro and link to the general B2B connector page of the module series, For example: 6 x 6 SoM LSHM B2B Connectors
Include Page |
---|
| PD:6 x 6 SoM LSHM B2B Connectors | PD:6 x 6 SoM LSHM B2B Connectors
Technical Specifications
Absolute Maximum Ratings
Scroll Title |
---|
anchor | Table_TS_AMR |
---|
title | PS absolute maximum ratings |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Symbols | Description | Min | Max | Unit |
---|
12V3P3V | Input Supply Voltage | -12120.5 | 3.75 | V | T_STG | Storage Temperature | -40 | 85 | °C |
|
Recommended Operating Conditions
Operating temperature range depends also on customer design and cooling solution. Please contact us for options.
Scroll Title |
---|
anchor | Table_TS_ROC |
---|
title | Recommended operating conditions. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Parameter | Min | Max | Units | Reference Document |
---|
12V12 | 12See Xilinx ???? See MT25QU512ABB8E12-0SIT (U9) datasheet. |
|
Physical Dimensions
Module size: 84 mm × 65 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 10 mm.
PCB thickness: 1.54 56 mm.
Page properties |
---|
|
In 'Physical Dimension' section, top and bottom view of module must be inserted, information regarding physical dimensions can be obtained through webpage for product in Shop.Trenz, (Download> Documents> Assembly part) for every SoM. For Example: for Module TE0728, Physical Dimension information can be captured by snipping tools from the link below: https://www.trenz-electronic.de/fileadmin/docs/Trenz_Electronic/Modules_and_Module_Carriers/5.2x7.6/TE0745/REV02/Documents/AD-TE0745-02-30-1I.PDF
|
...
Scroll Title |
---|
anchor | Figure_TS_PD |
---|
title | Physical Dimension |
---|
|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 25 |
---|
diagramName | TEF0003_TS_PD |
---|
aspect | 5e705185-5827-752c-089d-756568e6698b |
---|
simpleViewer | false |
---|
width | 639 |
---|
aspectHash | 7695f7bc00c98da1082cb1c11a0a6258edf875fc |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 436 |
---|
|
Scroll Only |
---|
scroll-pdf | true |
---|
scroll-office | true |
---|
scroll-chm | true |
---|
scroll-docbook | true |
---|
scroll-eclipsehelp | true |
---|
scroll-epub | true |
---|
scroll-html | true |
---|
| Image Modified |
|
Currently Offered Variants
Page properties |
---|
|
Set correct link to the shop page overview table of the product on English and German. Example for TE0728: ENG Page: https://shop.trenz-electronic.de/en/Products/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/ DEU Page: https://shop.trenz-electronic.de/de/Produkte/Trenz-Electronic/TE07XX-Zynq-SoC/TE0728-Zynq-SoC/ For Baseboards or modules, where no overview page is available (and revision number is coded in the direct link) use shop search link, e.g. TE0706: ENG Page: https://shop.trenz-electronic.de/en/search?sSearch=TE0706 DEU Page: https://shop.trenz-electronic.de/de/search?sSearch=TE0706 |
...
Scroll Title |
---|
anchor | Table_VCP_SO |
---|
title | Trenz Electronic Shop Overview |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
|
Revision History
Hardware Revision History
...
Scroll Title |
---|
anchor | Table_RH_HRH |
---|
title | Hardware Revision History |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Date | Revision | Changes | Documentation Link |
---|
2017-06-27 | REV01 | Initial Release | REV01 |
|
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
Scroll Title |
---|
anchor | Figure_RV_HRN |
---|
title | Board hardware revision number. |
---|
|
Scroll Ignore |
---|
draw.io Diagram |
---|
border | false |
---|
viewerToolbar | true |
---|
| |
---|
fitWindow | false |
---|
diagramDisplayName | |
---|
lbox | true |
---|
revision | 14 |
---|
diagramName | TEF0003_RV_HRN |
---|
simpleViewer | false |
---|
width | |
---|
links | auto |
---|
tbstyle | hidden |
---|
diagramWidth | 290196 |
---|
|
|
Scroll Only |
---|
|
|
Document Change History
Page properties |
---|
|
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
...
Scroll Title |
---|
anchor | Table_RH_DCH |
---|
title | Document change history. |
---|
|
Scroll Table Layout |
---|
orientation | portrait |
---|
sortDirection | ASC |
---|
repeatTableHeaders | default |
---|
sortByColumn | 1 |
---|
sortEnabled | false |
---|
cellHighlighting | true |
---|
|
Date | Revision | Contributor | Description |
---|
Page info |
---|
infoType | Modified date |
---|
dateFormat | yyyy-MM-dd |
---|
type | Flat |
---|
|
| Page info |
---|
infoType | Current version |
---|
prefix | v. |
---|
type | Flat |
---|
showVersions | false |
---|
|
| Page info |
---|
infoType | Modified by |
---|
type | Flat |
---|
showVersions | false |
---|
|
| | -- | all | Page info |
---|
infoType | Modified users |
---|
type | Flat |
---|
showVersions | false |
---|
|
| |
|
Disclaimer
Include Page |
---|
| IN:Legal Notices |
---|
| IN:Legal Notices |
---|
|
...