Versions Compared

Old Version 94

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.


Scroll pdf ignore

Table of Contents

Table of Contents

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Module: Form factor 20 cm x 23,1 cm
    • Trenz Electronic Module TE0745
    • Temperature: -40 to 85 °C
  • On Board: TE0745 Module Socket (3 x Samtec connectors)
    • 24V power supply
    over ARKZ950/2 connecting
    • terminal
    • 1 x EMI Network Filter
    • 3 x Variable Step Down Regulator Module (VDRM) with head sink
    • 2 x Synchronous Buck Regulator
    • 2 x Button (User / Reset)
    • 2 x LED (Green)
  • Interfaces:
    • 1 x XMOD (TE0790) Pin Header (JTAG / UART)
    • 1 x Pin Header (JTAG)
    • 1 x microSD connector
    • 1 x RJ45 Ethernet connector
    • 1 x USB Host Connector
    • 8 x SFP-Connector
    • 6 x Pin Header 50 pol. (FPGA Bank I/O's and Power)
    • 6 x Pin Header 12 pol. (FPGA Bank I/O's and Power)
    • 1 x battery holder
    • 2 x DIP Switch Array (VCC_HR_B / Modi)
  • 2 x Button (User / Reset)
  • 2 x LED (Green)Dimension: 200 mm x 231 mm

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEB0745 block diagram


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1221
diagramNameTEB0745_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth640


Scroll Only



...

Scroll Title
anchorFigure_OV_BD
titleTEB0745 main components


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision56
diagramNameTEB0745_Figure_OV_MC
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641642


Scroll Only


  1. SFP+ Connector, J4 J6 J8 J10 J13 J15 J18 J20
  2. Board to Board Connector (B2B), J1 J2 J3
  3. RJ45 Gigabit Ethernet connector, J22
  4. SD card connector, J16
  5. USB connector, J41
  6. Push Button, S2 S3
  7. SDIO port expander, U15
  8. Power distribution switch, U4
  9. Battery holder, B1
  10. Mag I3C power, U26 U12 U5
  11. Push bottun switch, S1 S4
  12. Buck regulator, U6 U7
  13. I2C EEPROM, U33
  14. Low voltage chanel I2C switch, U16
  15. Overvoltage, undervoltage, reversesupply protection controller, U13
  16. EMI suppression filter, U29
  17. JTAG interface, J12
  18. Power jack, J31
  19. 8bit IO expandor for I2C bus, U18 U25
  20. Pin Headers J23...26 (Not Assembled)
  21. Pin Headers J27-J28-J32-J36 (Not Assembled)
  22. Pin Headers J37...40 (Not Assembled)

Initial Delivery State

Page properties
hiddentrue
idComments

Notes :

Only components like EEPROM, QSPI flash and DDR3 can be initialized by default at manufacture.

If there is no components which might have initial data ( possible on carrier) you must keep the table empty

...

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage device name

Content

Notes

EEPROMNot ProgrammedEUI-64 number programmed

Can be used for MAC



Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables.

...

Scroll Title
anchorTable_OV_BP
titleBoot process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MODE Signal State

ConnectConnected toB2BStatusBoot Mode

BOOTMODE

S1J2-133OpenQSPI
ShortSD Card


...

Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Schematic

Signal
Connected toB2BNote

PS_SRST

J2-152PS Reset
RST_IN_N

Push Button, S2

J2-131
General
Low Active Reset


Signals, Interfaces and Pins

...

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

onnected
B2B ConnectorInterfacesNumber of I/ONotes
J1

User I/O

48 singel ended, 24 Differential

2 singel ended

Connected to Bank 13

48 singel ended, 24 Differential

2 singel ended

C
Connected to Bank 12
JTAG Interface5 single endedTCK, TDI, TMS, TDO, JTAG_EN
SFP+ Connector8 DiffSPF4....7_RX_N/P , SPF4....7_TX_N/P
J2

Ethernet PHY4 Differential
2 single endedPHY_LED0...1
USB1 DifferentialOTG_N/P
Control Signals3 single endedPS_SRST, BOOTMODE, RST_IN_N
Power Control Signal2 single endedPWR_PS_OK, PWR_PL_OK
I2C Bus2 single endedI2C_SDA, I2C_SCL
User I/O4 single endedMIO12...15

J3


User I/O6 Single endedMIO46...51
SD Card Connector6 Single endedSD_CLK, SD_CMD, SD_DAT0...3 (MIO40...45)
SFP+ Connector8 Differential
SPF0
SPF0....3_RX_N/P , SPF0....3_TX_N/P

...


XMOD Pin Header

JTAG access to the TEB0745 SoM is available through B2B connector JB1 and JB2. JTAG_EN is connected to J1-138, JTAG_EN can be activated through DIP Switch S1-B2.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator

Connected to

B2B Pin

XMOD Header JB1Note
AMIO15J2-129JB1-3UART
Txd - input
TX - Input to the module
BMIO14J2-127JB1-7UART
Rxd
RX - Output of the module
CTCKJ1-143JB1-4JTAG interface signal
DTDOJ1-145JB1-8JTAG interface signal
FTDIJ1-142JB1-10JTAG interface signal
HTMSJ1-144JB1-12

JTAG interface signal

GRST_IN_NJ2-131JB1-11RESET will be connected to Push Button on JTAG Programmer

...


There is a DIP switch, S2, on TE0790 adapter which must be set as following.

Scroll Title
anchorTable_OBPSIP_I2CXmod_RTCDIP
titleI2C Address for RTC Xmod Adapter DIP-Switch Setting Description

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C DeviceI2C AddressDesignatorNotes
I2C_EXP0x72U16SFP 0-9
EEPROM0x51U33I/O EXP0x20...27U18...25

On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs

SD Card Socket

Power supply voltage for SD card holder is 3.3V.

...

anchorTable_OBP_SDcard
titleSD card interface MIOs and pins

...

RJ45 Connector

Etherneth Socket is connected to Board to Board (B2B)  JM2.

...

anchorTable_OBP_RJ45
titleLAN Transformer

...

DIP Switch,S2DefaultDescription
1ONUpdate Mode JTAG access to SC CPLD only
2OFFMust be always in OFF state.
3OFFVIO is supplied from Module
4ON3.3V  from XMOD


SFP+ Connectors

The TEB0745 is equipped with 8 SFP+ Connectors, 

Scroll Title
anchorTable_OBP_SFP
titleSFP Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

PinConnected to Notes
SFP+ , J4SFP+, J6SFP+, J8SFP+, J10SFP+, J13SFP+, J15SFP+, J18SFP+, J20
TD+B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
TD-B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
RD+B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
RD-B2B, J3B2B, J3B2B, J3B2B, J3B2B, J1B2B, J1B2B, J1B2B, J1GT
TX FAULTIO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
TX DISABLE IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF2 IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF1IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
MOD-DEF0IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
RS0IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
LOSIO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL
RS1IO Exp, U18IO Exp, U19IO Exp, U20IO Exp, U21IO Exp, U22IO Exp, U23IO Exp, U24IO Exp, U25SFP_CTRL


SD Card Socket

Power supply voltage for SD card holder is 3.3V.

Scroll Title
anchorTable_OBP_SDcard
titleSD card interface MIOs and pins

...

EEPROM

...

anchorTable_OBP_EEP
titleI2C EEPROM interface MIOs and pins

...

DIP Switches

There are two DIP Switches S1,S4.

Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S1

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator
SignalsConnected toB2B
Note
Notes
S1A
SD_CLK
BootMode
MIO40
J2
J3-
133
150
S1BJTAG_ENJ1-148S1C-S1DPS_SWJ2-123

VCC_HR_B voltage can be selected using DIP Switch S4 .


SD_CMDMIO41J3-152
SD_DAT0MIO42J3-154
SD_DAT1MIO43J3-156
SD_DAT2MIO44J3-158
SD_DAT3MIO45J3-160


RJ45 Connector

Ethernet Socket is connected to Board to Board (B2B)  JM2.

Scroll Title
anchorTable_OBP_RJ45
titleLAN Transformer

scroll-

Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S4

scroll-tablelayout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Output Voltage
Signal
1
B2B
234Note1.2VOffOffOff-1.5VOnOnOff-

1.8V

OnOnOn-2.5VOnOffOff-

3.3V

OnOffOn-

Push Button

There are two push buttons S2, S3.

Notes
PHY_MDIO0_PJ2-120
PHY_MDIO_NJ2-122
PHY_MDIO1_PJ2-126
PHY_MDIO1_NJ2-128
PHY_MDIO2_PJ2-132
PHY_MDIO2_NJ2-134
PHY_MDIO3_PJ2-138
PHY_MDIO3_NJ2-140
PHY_LED0J2-144
PHY_LED1J2-146


Test Points

scroll-scroll-title
anchorTable_OBPSIP_Push_ButtonTestPoint
titleOn-board push button =sTest Points Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Designator

Test Point

Connected to
Signals

B2B Connector

Active Level
Notes
Note
TP 1
S3J3
5V
USR_BTN
-
153
Active highS2

TP 2VBAT
RST
_IN
_N
J2
J1-
131
146
Active highGeneral Reset

LEDs

...

anchorTable_OBP_LED
titleOn-board LEDs

TP 3VCCIO18VJ2- J3
TP 4VCC_HR_BJ1
TP 5-9GND-
TP 10PS_1.8VJ2
TP 11VCC_HR_BJ1
TP 123.3VJ1- J2
TP 13--
TP 14--
TP 15PWR_PL_OKJ2- 135
TP 16PWR_PS_OKJ2-139
TP 1724V_FUSED-
TP 183.3V_SFP-


On-board Peripherals

...

In 'Power and Power-on Sequence' section there are three important digrams which must be drawn:

  • Power on-sequence
  • Power distribution
  • Voltage monitoring circuit
Page properties
hiddentrue
idComments
Note

For more information regarding how to draw diagram, Please refer to "Diagram Drawing Guidline" .

Power Supply

Power supply with minimum current capability of 2.5 A for system startup is recommended.

Power Consumption

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transciever PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Page properties
hiddentrue
idComments

Notes :

In the on-board peripheral table "chip/Interface" must be linked to the corresponding chapter or subsection


Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input PinTypical Current
24VTBD*
VBATTBD*

* TBD - To Be Determined

...

Chip/InterfaceDesignatorNotes
EEPROMU33

DIP Switches

S1, S4
I2C SwitchU16
I/O ExpanderU18...U25
Push ButtonsS2, S3
LEDsD1, D5


EEPROM

Scroll Title
anchorFigureTable_PWROBP_PDEEP
titlePower DistributionI2C EEPROM interface MIOs and pins

scroll-

ignore

tablelayout

drawio

orientation

border

portrait

false

sortDirection

viewerToolbar

ASC

true

repeatTableHeaders

fitWindow

default

false

style

diagramDisplayName

widths

lbox

sortByColumn

true

1

revision

sortEnabled

7

false

diagramNameTEB0745_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641
Scroll Only

Image Removed

...

cellHighlightingtrue

MIO PinSchematicB2BNotes
MIO10I2C_SCLJ2-119
MIO11I2C_SDAJ2-121



Scroll Title
anchorFigureTable_OBP_PWRI2C_PSEEPROM
titlePower SequencyI2C address for EEPROM

scroll-

ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision4
diagramNameTEB0745_PWR_PS
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth641
Scroll Only

Image Removed

...

tablelayout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

I2C DeviceDesignatorI2C AddressNotes
EEPROMU330x51


DIP Switches

There are two DIP Switches S1,S4.

Scroll Title
anchorTable_PWROBP_PRDIP
titleModule power rails.DIP Switch S1

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorConnected toB2B
VCC / VCCIODirectionNotesJB13.3VIN
Note
S1-ABootModeJ2-133
S1-BJTAG_ENJ1-148
S1-C-

S1-DPS_SWJ2-123
PL_VIN