Page History

...

• SoC/FPGA
  
  • Package: SFVC784
  • Device: ZU2 ...ZU5, *
  • Engine:  EG, CG, EV, *
  • Speed: -1, -1L, -2, -2L, 3, *, **
  • Temperature: I, E, *, **
• RAM/Storage
  • 2x  DDR4 SDRAM,
    • Data Width: 16 Bit
    • Size: 8 Gb, *
    • Speed: 2400 Mbps, ***
  • 2x QSPI boot Flash in dual parallel mode
    • Data Width: 8 Bit
    • Size: 512 Mb Gb, *
  • 1x e.MMC Memory
    • Data Width: 16 Bit
    • Size: 8 Gb, *
  • MAC address serial EEPROM
• On Board
  
  • Lattice MachXO2 CPLD
  • Programmable Clock Generator
  • Hi-speed USB2 ULPI Transceiver
  • 4x LEDS
• Interface
  • 1 GB/s serial GMII Gbps RGMII Ethernet interface
  • Hi-speed USB2 ULPI transceiver with full OTG support
  • Graphic Processor Mali-400 MP2, *
  • 34 156 x High Performance (HP) und 96 x High Density PL I/Os
  • 4 x serial PS GTR transceivers
    • PCI Express interface version 2.1 compliant
    • SATA 3.1 specification compliant interface

    • DisplayPort source-only interface with video resolution up to 4k x 2k

    • 2x USB 3.0 specification compliant interface implementing a 5 Gbit/s line rate
• Power
  • All power regulators on board
• Dimension
  • 40 x 50 mm
• Note
  • * depends on assembly version
  • ** also non low power assembly options possible
  • *** depends on used U+ Zynq and DDR4 combination
  • Rugged for shock and high vibration

...

Main Components

...

1. Xilinx Zynq ZYNQ UltraScale+ XCZU3EGMPSoC, U1
2. Red LED (ERR_OUT), D3
3. Green LED (ERR_STATUS), D4
4. Red LED (DONE), D1
5. 10/100/1000 Mbps energy efficient ethernet transceiverEnergy Efficient Ethernet Transceiver, U8
6. 8Gb DDR4, U2-U3
7. 512 Mbit QSPI flash memory, U7-U17
8. Green User LED, D2
9. B2B connector Samtec Razor Beam, JM1
10. Programmable clock generator, U10
11. USB2.0 Transceiver,  U18
12. B2B connector Samtec Razor Beam, JM3
13. B2B connector Samtec Razor Beam, JM2
14. 8 GByte eMMC memory, U6
15. Lattice Semiconductor MachXO2 System Controller CPLD, U21

...