Page History
...
Industrial-grade Xilinx Spartan-3A DSP FPGA module (1800 k gates or 3400 k gates)
USB 2.0 (Hi-Speed USB) interface with a signalling bit rate of up to 480 Mbit/s
32-bit wide 1 Gbit DDR SDRAM
FPGA configuration through:
JTAG (B2B connector, pin header)
SPI Flash memory
Large SPI Flash memory (for configuration and operation) accessible through:
B2B connector (SPI direct)
FPGA
JTAG port (SPI indirect)
USB bus (Firmware Upgrade Tool)
On-board 100 MHz oscillator for high performance
On-board 24 MHz oscillator available to user
3 on-board high-power, high-efficiency, switch-mode DC-DC converters capable of 3 A each
Power supply range: 4.0 - 7.0 V
Power supply via USB or B2B (carrier board)
4 LEDs, 2 push buttons, 8 DIP switches.
Plug-on module with 2 female 1.27 mm pitch header connectors
109 FPGA I/O pins (+ 10 dual-purpose pins) available on B2B connectors
Evenly spread supply pins for good signal integrity
Assembly options for cost or performance optimization available on request
Figure 1: TE0320, top view.
Figure 2: TE0320, bottom view.
Overview
Content Tools