Page History
...
- Industrial-grade Xilinx Spartan-3A DSP FPGA module (1800 k gates or 3400 k gates)
- USB 2.0 (Hi-Speed USB) interface with a signalling bit rate of up to 480 Mbit/s
- 32-bit wide 1 Gbit DDR SDRAM
- FPGA configuration through:
- JTAG (B2B connector, pin header)
- SPI Flash memory
- Large SPI Flash memory (for configuration and operation) accessible through:
- B2B connector (SPI direct)
- FPGA JTAG port (SPI indirect)
- USB bus (Firmware Upgrade Tool)
- On-board 100 MHz oscillator for high performance
- On-board 24 MHz oscillator available to user
- 3 on-board high-power, high-efficiency, switch-mode DC-DC converters capable of 3 A each
- Power supply range: 4.0 - 7.0 V
- Power supply via USB or B2B (carrier board)
- 4 LEDs, 2 push buttons, 8 DIP switches.
- Plug-on module with 2 female 1.27 mm pitch header connectors
- 109 FPGA I/O pins (+ 10 dual-purpose pins) available on B2B connectors
- Evenly spread supply pins for good signal integrity
- Assembly options for cost or performance optimization available on request
|
| ||||||||||
| Figure 1: TE0320, top view. | Figure 2: TE0320, bottom view. |
Overview
Content Tools