Versions Compared

Old Version 21

changes.mady.by.user Sergio Pavesi

Saved on

compared with

New Version 22

changes.mady.by.user Sergio Pavesi

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

    1. C:\XilinxProject, if you have copied the folder "TE0xxx-Reference-Designs\reference-TE0xxx" to "C:\XilinxProject" ( "C:\XilinxProject\reference-TE0xxx" and "C:\XilinxProject\TE-EDK-IP");

    2. otherwise you must copy the contents of GitHub's 'TE-EDK-IP' folder inside the already existent empty folder "TE0xxx-Reference-Designs\TE-EDK-IP".

       

Warning

You should not alter folder nesting because is a Xilinx Platform Studio requirements

Tip

From now on, the choice (a) is assumed.

 

 

  • click set_xxxx_project.bat to select your xxxx FPGA mounted on TE module;
  • double click the system.xmp;
  • the Xilinx Platform Studio should open
  • you should click "Project" and then click "Project Options";

...

  • select "system.xml", "C:\XilinxProject\reference-TE0300\SDK\SDK_Export\hw\system.xml"
  • after the selection a new  hardware specification (with name "reference-TE0300_hw_platform") appears in the Procject Explorer of SDK.
Scroll pdf title
titleReferenceHWplatform
Image Added

 

  • the FX2 microcontroller on the TE0300, TE0320 or TE0630 family should contain valid firmware before proceeding. If the FX2 microcontroller has not been programmed before, please follow the instructions in the ????? family User Manuals. You can use Cypress, Python OpenFut or C# OpenFutNet programs.
  • If you are sure that the FX2 microcontroller is properly connected, you can connect to the TE0300/TE0320/TE0630 module with a JTAG adapter cable. We recommend using the Xilinx Platform Cable USB. Then connect the TE0300/TE0320/TE0630 module to a USB cable.

...