Page History

You should click "File" >"New" > "Project".

A pop up "New Project" will appear.

Click "Xilinx" > "Application Project".

A new pop up "New Project Application Project" will appear.

You should set the value of parameters as in the image below.

Scroll Title
title ApplicationProject demo creation

After this clik "Finish".

A new pop-up "New Project Templates" will appear.

Scroll Title
title Available Templates

In this case select "Empty Apllication" under "Available Templates".

Click "Finish".

A new "Application Project" named "demo" will be created in the "Project Explorer".

Now you should click "Project" > "Properties". A pop-up "Properties for demo" will appear. Now you should select "Project References".

Now you should assure that "reference-TE0300_hw_platform" and "standalon_bsp_0" are both checked; if their box are not already checked, you should check them now;

Scroll Title
title Project References checking

Now the contents of "Project Explorer" should be this one below.

Scroll Title
title Application Project "demo", BSP and reference hardware checked

Now you should copy the contents of the original demo (all .c and .h files from "TE0xxx-Reference-Designs\reference-TE0xxx\SDK\SDK_Workspace\demo\src" already moved in the temporary folder "C:\demo_src_TE") inside the folder "C:\XilinxProject\reference-TE0xxx\SDK\SDK_Workspace\demo\scr" as already do in the figure below.

Scroll Title
title Application Project "demo" created and original .c and .h file are moved inside src subfolder

• You should select "src" folder in "Project Explorer" > "demo", right click and select "Refresh"; in this way the .h and .c files will appears under the "src" folder of "Project Explorer".
• You should select "demo" folder in "Project Explorer", right click and select "Refresh".

Scroll Title
title Refresh the Application Project "demo"

You should select (left click) "demo" folder in "Project Explorer".

Scroll Title
title Select "demo" project

You should click "Xilinx Tools" and then click "Generate linker script".

Scroll Title
title Generate linker script for application project "demo"

A pop-up "Generate a linker script" will appear; you should click "Generate";

Scroll Title
title Generate a linker script

The pop-up will close and "lscript.ld" file will be (re)written in "src" subfolder of "demo".

After this, you should wait that building (compile and linking) procedure ends; "Finished Building: demo.elf.elfcheck" should appear in Console C-build [demo].