Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Warning

If the TE0300 module is used, the S2 switch must be turned on (RUN).

If the TE0320 module is used, the S1D switch must be turned on (RUN).

 

DEWESoft device (Generation 2)

...

If DEWESoft driver is not installed, this immage appears inWindows in Windows "Device manager"

Scroll Title
titleDEWESoft driver is not installed: Unknow Device

If DEWESoft driver is installed, one of these two immage appears in Windows "Device manager"

Scroll Title
titleDewwsoft DEWESoft device driver installed
Dewesoft DEWESoft Driver VersionDevice Manager image
Current
Prevoius

...

  1. Generation 3 firmware is correctly stored in FX2 microcontroller's EEPROM;
  2. the EEPROM connection is enabled when the TE USB FX2 module is powered on.

If TE USB FX2 driver is not installed, this immage appears in Windows "Device manager"

Scroll Title
titleTE USB FX2 driver is not installed

...

Image Modified

If TE USB FX2 driver is installed, this immage appears in Windows "Device manager"

Scroll Title
titleTE USB FX2 driver is installed.
Image Modified

Cypress device (Recovery procedure)

...

  1. the EEPROM connection is disabled when the TE USB FX2 module is powered on.

If Cypress USB Generic Driver is not installed this immage appears in Windows "Device manager"

Scroll Title
titleCypress USB Generic Driver is not installed
Image Modified

If Cypress USB Generic Driver is installed, this immage appears in Windows "Device manager"

Scroll Title
titleCypress USB Generic Driver is installed
Image Modified