Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

CompanyTrenz Electronic GmbH
PCN NumberPCN-20210219
TitleTE0745-02 DDR3 , Flash Change and Product Update
SubjectBOM change
Issue Date

2021-0203-2209

Products Affected

This change affects all Trenz Electronic TE0745 SoMs of revision 02: TE0745-02-*

Affected Product

ChangesReplacement
TE0745-02-71I11-A#1, #2, #3, #4TE0745-02-
71I33
71I31-A
TE0745-02-71I11-AK#1, #2, #3, #4TE0745-02-
71I33
71I31-AK
TE0745-02-72I11-A#1, #2, #3, #4TE0745-02-
72I33
72I31-A
TE0745-02-73E31-A#2, #3, #4TE0745-02-
73E33
73E31-A (1)
TE0745-02-81C11-A#1, #2, #3, #4TE0745-02-
81C33
81C31-A
TE0745-02-81C11-AK#1, #2, #3, #4TE0745-02-
81C33
81C31-AK
TE0745-02-91C11-A#1, #2, #3, #4TE0745-02-
91C33
91C31-A
TE0745-02-92I11-A#1, #2, #3, #4TE0745-02-
92I33
92I31-A
TE0745-02-92I11-AK#1, #2, #3
S00010-02
, #4TE0745-02-92I31-AK
TE0745-02-92I11-B
#1, #2, #3, #4TE0745-02-92I31-B
TE0745-02-92I11-F#1, #2, #3, #4TE0745-02-
92I33
92I31-F
TE0745-02-93E11-A#1, #2, #3, #4TE0745-02-
93E33
93E31-A
TE0745-02-93E11-KA#1, #2, #3, #4
S00011
S00021-02
S00005#1, #2, #3, #4S00005-02

(1) This variant has already ISSI DDR3 assembled, therefore the article number is not changed. See also section Method of Identification.

Changes

#1 Change DDR3 RAM (U3, U5) from IM4G16D3FABG-125I to IS43TR16256BL-125KBLI

Type: BOM change
Reason: Component is end of life.
Impact: New DDR timings may be considered in designs. DDR3 setup used in reference design is known to work still.

#2

...

Type: BOM change
Reason: Ensure long time availability.
Impact: Jedec Manufacturer ID changed from 01h to 9Dh, the device ID from 18h to 19h. 512Mbit flash are now available. 

...

Clock Revision Change (U33) SiT8008AI-73-XXS-52.000000E to SiT8008BI-73-XXS-52.000000E 

Type: BOM change
Reason: Switch to actual revision. Revision A devices may be discontinued.
Impact: None. 

#3 Change Ferrite Beads (L1 .. L7, L11 .. L13) BKP0603HS121-T to MPZ0603S121HT000

Type: BOM change
Reason: Part is NRND and EOL announced.
Impact: None. DC resistance decreased from 150mOhm to 130mOhm, rated current increased from 0.85A to 1A.

#4 Set S/N to not fitted

Type: BOM change
Reason: Part is end of life.
Impact: Track it pad no more available. Pin 20 of CPLD was connected via S/N to GND and is now floating. However pin is not used in delivery CPLD Firmware, so no further impact.

Method of Identification

Locate DDR3 RAM (U3, U5 top)  and Flash (U14 bottom) on top side of PCB:

draw.io Diagram
bordertruefalse
diagramNameTE0745-02_locate_DDR_Flash
simpleViewerfalse
width
linksauto
tbstyletop
diagramDisplayName
lboxtruefalse
diagramWidth434219
revision13

oldnew

IM4G16D3FABG-125I

IS43TR16256BL-125KBLI

draw.io Diagram
borderfalse
diagramName27202
simpleViewerfalse
width200
linksauto
tbstyletop
diagramDisplayName
lboxfalse
diagramWidth337
revision1


draw.io Diagram
borderfalse
diagramName29494
simpleViewerfalse
width196
linksauto
tbstyletop
diagramDisplayName
lboxfalse
diagramWidth327
revision1

S25FL256SAGBHI20

IS25LP512M-RHLE

draw.io Diagram
borderfalse
diagramName25945
simpleViewerfalse
width200
linksauto
tbstyletop
diagramDisplayName
lboxfalse
diagramWidth309.49
revision1
draw.io Diagram
borderfalse
diagramName30275
simpleViewerfalse
width200
linksauto
tbstyletop
diagramDisplayName
lboxfalse
diagramWidth310
revision1

Production Shipment Schedule


Only for variant TE0745-02-73E31-A: DDR3 was already ISSI IS43TR16256BL-125KBLI. TE0745-02-73E31-A modules with serial number greater than 684418 are affected by the changes.

Production Shipment Schedule

From end of Juli TE0745-02- variant will be available from mid of  in parallel to the precursor. From end of Juni 2021, after old stock is gone, all variants above are replaced by the corresponding variants.


Contact Information

If you have any questions related to this PCN, please contact Trenz Electronics Technical Support at

Disclaimer

Any projected dates in this PCN are based on the most current product information at the time this PCN is being issued, but they may change due to unforeseen circumstances.  For the latest schedule and any other information, please contact your local Trenz Electronic sales office, technical support or local distributor.

...