Page History
...
For detailed information about the pin out, please refer to the Master Pinout Table.
Peripherals
LED's
There are 3 LED's on TE0729:
| LED | Color | Connected to | Notes |
|---|---|---|---|
| D1 | red | System Controller | Global Status LED |
| D2 | green | DONE | Inverted DONE, ON when FPGA not configured |
| D8 | red | MIO7 | OFF when PS7 not booted and not controlling MIO7 by software, else user controlled |
...
LED D2 is connected to the FPGA Done pin and will go off as soon as PL is configured.
This LED will not operate if the SC can not power on the 3.3V output rail that also powers the 3.3V circuitry on the module.
...
Overview
Content Tools