Page History

...

Bank	Type	B2B Connector	I/O Signal Count	Voltage	Notes
0	HR	-	-	3.3V	Configuration bank
12	HR	JM2	50 I/O-pins 24 LVDS-pairs possible	User	HR-Banks support voltages from 1.2V to 3.3V standards. NOTE: BANK 12 IS NOT AVAILABLE ON THE K70T DEVICE.
13	HR	JM1	48 I/O-pins 24 LVDS-pairs possible	User	HR-Banks support voltages from 1.2V to 3.3V standards.
14	HR	JM1, JM3	8 I/O-pins, 4 I/O-pins (2 LVDS-pairs possible)	3.3V	pins at B2B connector JM1, 3.3V IO-voltage.
15	HR	JM2	18 I/O-pins 9 LVDS-pairs possible	User	HR-Banks support voltages from 1.2V to 3.3V standards.
16	HR	JM1	16 I/O-pins 8 LVDS-pairs possible	User	HR-Banks support voltages from 1.2V to 3.3V standards.
32	HP	NC	-	-	Bank not used.
33	HP	NC	-	-	Bank not used.
34	HP	NC	-	-	Bank not used.

...

Power Input Pin	Max Current
VIN	TBD*
3.3VIN	TBD*

Table 8: maximal Maximum current of power supplys supplies

* TBD - To Be Determined soon with reference design setup.

...

Variants Currently In Production

...

Hardware revision number is printed on the PCB board together with the module model number separated by the dash.

Image RemovedImage Added

...