Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

HTML
<!-- tables have all same width (web max 1200px and pdfPDF full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>

...

Page properties
hiddentrue
idComments

Important General Note:

  • If some section is configurable and depends on Firmware, please refer to the addition page (for example CPLD). If not available, add note, that this part is configurable
  • Designate all graphics and pictures with a number and a description, Use "Scroll Title" macro

    • Use "Scroll Title" macro for pictures and table labels. Figure number must be set manually at the moment (automatically enumeration is planned by scrollPDF)
      • Figure template:

        Scroll Title
        anchorFigure_anchorname
        titleText


        Scroll Ignore

        Create DrawIO object here: Attention if you copy from other page, objects are only linked.


        Scroll Only

        image link to the generate DrawIO PNG file of this page. This is a workaround until scroll pdf PDF export bug is fixed



      • Table template:

        • Layout macro can be use for landscape of large tables

      • Scroll Title
        anchorTable_tablename
        titleText

        Scroll Table Layout
        orientationportrait
        sortDirectionASC
        repeatTableHeadersdefaultstyle
        widthssortByColumn1
        sortEnabledfalse
        cellHighlightingtrue

        ExampleComment
        12



    • The anchors of the Scroll Title should be named consistant consistent across TRMs. A An incomplete list of examples is given below

      • <type>_<main section>_<name>

        • type: Figure, Table
        • main section:
          • "OV" for Overview
          • "SIP" for Signal Interfaces and Pins,
          • "OBP" for On board Peripherals,
          • "PWR" for Power and Power-On Sequence,
          • "B2B" for Board to Board Connector,
          • "TS" for Technical Specification
          • "VCP" for Variants Currently in Production
          •  "RH" for Revision History
        • name: custom, some fix names, see below
      • Fix names:
        • "Figure_OV_BD" for Block Diagram

        • "Figure_OV_MC" for Main Components

        • "Table_OV_IDS" for Initial Delivery State

        • "Table_PWR_PC" for Power Consumption

        • "Figure_PWR_PD" for Power Distribution
        • "Figure_PWR_PS" for Power Sequence
        • "Figure_PWR_PM" for Power Monitoring
        • "Table_PWR_PR" for Power Rails
        • "Table_PWR_BV" for Bank Voltages
        • "Table_TS_AMR" for Absolute_Maximum_Ratings

        • "Table_TS_ROC" for Recommended_Operating_Conditions

        • "Figure_TS_PD" for Physical_Dimensions
        • "Table_VCP_SO" for TE_Shop_Overview
        • "Table_RH_HRH" for Hardware_Revision_History

        • "Figure_RH_HRN" for Hardware_Revision_Number
        • "Table_RH_DCH" for Document_Change_History
    • Use Anchor in the document: add link macro and add "#<anchorname>
    • Refer to Anchror from external : <page url>#<pagename without space characters>-<anchorname>

...

Page properties
hiddentrue
idComments

Note for Download Link of the Scroll ignore macro:


Scroll Ignore

Download PDF version of this document.

...

Trenz Electronic TE0728 is an automotive-grade FPGA module integrating a Xilinx Automotive an Automotive Xilinx  Zynq-7020 7 FPGA, two 100 Mbit Ethernet transceivers (PHY) , 512 MByte DDR3L SDRAM, 16 MByte DDR3 SDRAM, QSPI Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. 

...

Page properties
hiddentrue
idComments
    • Note:
  • Xilinx
  • XA7Z020
  • XC7Z020-1CLG484Q (Automotive)
  • Rugged for shock and high vibration
  • Dimensions: 6 x 6 cm
  • Temperature range: Automotive
  • [XA7Z014S is available on other assembly options]
    • Package: CL/CLG484
    • Speed Grade: -1
    • Temperature Grade: Expanded (-40 to +128 °C)

  • Dual-Core ARM Cortex-A9 MPCore
  • 2 x 100 MBit Ethernet transceiver (PHY)
  • 512 MByte DDR3L SDRAM, 16-bit-wide 
  • DDR3 SDRAM, up to 512MB, up to 1066 Mb/s, connected to PS  [different size is available on other assembly options]
  • 16 MByte
  • QSPI Flash memory (with XiP support)
  • Plug-on module with 3 x 80-pin Samtec Micro Tiger Eye(TM) high-speed connectors
  • 76 single ended I/O, 24 LVDS pairs (48 I/O) and 42 MIO available on board-to-board connectors
  • [different size is available on other assembly options]
  • Programmable SIT8918A , PS clock generator
  • 2 Kbit serial EEPROM
  • Three user LEDs
  • CAN transceiver (PHY)
  • 12 V power supply with watchdog
  • On-board high-efficiency DC-DC converters
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Temperature compensated RTC (real-time clock)
  • Three user LEDs
  • Evenly-spread supply pins for good signal integrity

Other assembly options for cost or performance optimization plus high volume prices available on request.

Depending on the customer design, additional cooling might be required.

Block Diagram

  • 2 x 100 MBit Ethernet transceiver (PHY)
  • Board to Board (B2B)
    • Plug-on module with 3 x 80-pin Samtec Micro Tiger Eye(TM) high-speed connectors
  • I/O Interface
    • 42x MIO
    • 200x HR
    • 128x PS IO
    • 0x GTP Transceiver
    • 0x GTX Transceiver
  • Power Supply
    • 12 V power supply with watchdog
  • Others:
    • Dimensions: 6 x 6 cm
    • Rugged for shock and high vibration
    • On-board high-efficiency DC-DC converters
    • System management and power sequencing
    • eFUSE bit-stream encryption
    • AES bit-stream encryption
    • Evenly-spread supply pins for good signal integrity

Block Diagram

Scroll Title
anchorFigure_OV_BD
titleTE0728 block diagram


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramName

Scroll Title
anchorFigure_OV_BD
titleTE0728 block diagram
Scroll Ignore

draw.io Diagram
bordertrue
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision8
diagramNameTE0728_OV_BD
simpleViewerfalse
widthlinksauto
tbstylehidden
lboxtrue
diagramWidth641
revision25


Scroll Only


Main Components

Page properties
hiddentrue
idComments

Notes :

  • |Picture of the PCB (top and bottom side) with labels of important components
  • Add List below

...

Scroll Title
anchorFigure_OV_MC
titleTE0728 main components


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalsediagramDisplayName
lboxfalse
revision38
diagramNameTE0728_MC2
simpleViewertrue
width600
linksauto
tbstylehidden
lboxfalse
diagramWidth633
revision501173


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Modified




  1. 512 MByte DDR3 SDRAM, U1
  2. Xilinx Automotive XA7Z020-1CLG484Q ,U2
  3. 100 MBit Ethernet transceiver, U3
  4. 3.5V to 60V step-down converter, U4
  5. Standard Clock Oscillators @ 25MHz, U5
  6. 1.5 A Low Dropout Linear Regulator, U6
  7. Real Time Clock, Micro Crystal @32.768 MHz, U7
  8. 3.5V to 60V step-down converter, U8
  9. 3.5V to 60V step-down converter, U9
  10. 100 MBit Ethernet transceiver, U10
  11. 100 MBit Ethernet transceiver, U10
  12. User LED Green, D4
  13. Real Time Clock, U7
  14. Standard Clock Oscillators, U5
  15. 64 Kbit I2C EEPROM, U11
  16. Low-Quiescent-Current Proggrammable Delay Supervisory Circuit, U12
  17. CAN Tranceiver, U16
  18. QSPI NOR 16 MByte QSPI Nor Flash memory, U13
  19. Standard Clock Oscillators @ 50MHzOscillators, U14
  20. Low-Quiescent-Current Priggrammable Programmable Delay Supervisory Circuit, U15
  21. CAN Tranceiver, U16
  22. Low-Quiescent-Current Programmable Delay Supervisory Circuit, U12
  23. B2B connector B2B connector  Samtec Micro Tiger Eye Connector  SEM-140-02-03 , JM2
  24. B2B connector  Samtec Micro Tiger Eye Connector  SEM-140-02-03connector , JM3
  25. B2B connector  Samtec Micro Tiger Eye Connector  SEM-140-02-03, JM1
    User LED Greenconnector , JM1

FPGA (U2), DDR3 SDRAM (U1) and QSPI (U13) can be  varied on other assembly option, for more information contact us. 

Initial Delivery State

Scroll Title
anchorTable_OV_IDS
titleInitial delivery state of programmable devices on the module

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Storage

device name

Device

Symbol

Content

Quad SPI Flash

U13
Empty

Not Programmed

EEPROMU11Not Programmed

...


Configuration Signals

Page properties
hiddentrue
idComments
  • Overview of Boot Mode, Reset, Enables,

...

Scroll Title
anchorTable_OV_BP
titleBoot process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO4

Signal

FPGA BankPinB2BMIO pinSignal StateBoot Mode

Boot_R

500

E4

J2-11

Low

QSPI

MIO4HighSD Card

Zynq-7020SoC  includes a reset that is driven by the reset system. Hardware resets are driven by the power-on reset signal (PS_POR_B) and the system reset signal (PS_SRST_B).



Scroll Title
anchorTable_OV_RST
titleReset process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

FPGA BankPinB2B

PS_POR_B

500

B5

JM2-9
PS_SRST_B501C9JM2-2
B2BI/ONote

Reset

J2-7InputComes from Carrier
RST_OUTJ2-9OutputPS_PROB_B


Signals, Interfaces and Pins

...

Board to Board (B2B) I/Os

TE0728 Module has 3 B2B connectors and every connector has 80 pins (2 row, 40 pins).

FPGA bank number and number of I/O signals connected to the B2B connector:

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

FPGA BankTypeB2B ConnectorI/O Signal CountVoltage LevelNotes
13
JM1
HRJ148 Single ended (24 Diff)VCCO_13variable from carrier
500
JM1
MIOJ14 Singel ended3.3V
501MIOJ2
37
38 Singel endedVMIO1variable from carrier
33
JM3
HRJ334 Single ended (17 Diff)3.3V
35
JM3
HR
20

J3

3.3V35JM2

J2

20 Single ended (10 Diff)

22 Single ended (11 Diff)

22

3.3V

JTAG Interface



Ethernet PHY

Ethernet pins connections to Board to Board (B2B). Ethernet components ETH1 and ETH2 are connected to B2B connector J3JTAG access to the Xilinx XA7Z020 FPGA through B2B connector JM2.

Scroll Title
anchorTable_SIP_B2B_JTGEth
titleJTAG pins connectionEthernet PHY B2B connectors.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

B2B Pin

TMSJM2-12
TDIJM2-10
TDOJM2-8
TCKJM2-6

MIO Pins

...

anchorTable_OBP_MIOs
titleMIOs pins

...

UART

There is no fixed mapping for PS7 UART, if needed it can be mapped to free pins from MIO1 Bank or via EMIO to PL pins.

Recommended mapping for primary (console, debug) UART are MIO52, MIO53.

On-board Peripherals

...

hiddentrue
idComments

Notes :

...

SchematicETH1ETH2DirectionNotes
CTREFJ3-57J3-25InMagnetics center tap voltage
TD+J3-58J3-28OutTransfer
TD-J3-56J3-26Out
RD+J3-52J3-22InReceive
RD-J3-50J3-20In
LED1J3-55J3-23OutLED Yellow on carrier, multiple usage-ACK
LED2J3-53J3-21Out
LED3J3-51J3-19OutLED Green on carrier, multiple usage-Link
POWERDOWN/INTL21R20In
RESET_NM15R16InActive low PHY Reset


CAN PHY

CAN pins connections to Board to Board (B2B).

Scroll Title
anchorTable_SIP_B2B_CAN
titleCAN B2B connectors.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SchematicB2BDirectionNotes
CANH/CANLJ1-2/J1-4Inout/Inout


JTAG Interface

JTAG access to the Xilinx XA7Z020 FPGA through B2B connector JM2.

Scroll Title
anchorTable_SIP_JTG
titleJTAG pins connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

B2B Pin

TMSJ2-12
TDIJ2-10
TDOJ2-8
TCKJ2-6


MIO Pins

...

Scroll Title
anchorTable_OBP_MIOs
titleOn board peripheralsMIOs pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylesortByColumnwidthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceProductNotes
SPI FlashU1316 MByte Flash
EEPROMU1164 Kbit EEPROM
RTCU7Real Time Clock
DDR3 SDRAMU1Volatile Memory
EthernetU3, U10CAN TransceiverU16
User LEDD4Green LED

Quad SPI Flash Memory

On-board QSPI flash memory is used to store initial FPGA configuration. Datasheet is provided in Texas Instruments. Besides FPGA configuration, remaining free flash memory can be used for user application and data storage. All four SPI data lines are connected to the FPGA allowing x1, x2 or x4 data bus widths. Maximum data rate depends on the selected bus width and clock frequency used.

Quad SPI Flash (U7) is connected to the Zynq PS QSPI0 interface via PS MIO bank 500.

...

anchorTable_OBP_SPI
titleQuad SPI interface MIOs and pins

...

MIO PinConnected toB2BNotes
MIO0MIO0-RTC interrupt
MIO1...MIO6

SPI_CS , SPI_DQ0... SPI_DQ3

SPI_SCK

-SPI Flash
MIO7LED RED-LED
MIO8/MIO9Tx/Rx-CAN Transceiver
MIO10...MIO13IO_0 ... IO_3J1GPIO
MIO14/MIO15SCL/SDA-I2C
MIO16...MIO39-J2GPIO
MIO40...MIO48CLK, Cmd, Data0...Data3, wp, cdJ2SD
MIO48PS_MIO48_501J2LED Red on Carrier
MIO49PS_MIO49_501J2LED Yellow on Carrier
MIO50PS_MIO49_501J2LED Green on Carrier
MIO51PS_MIO51_501J2GPIO
MIO52/MIO53UART_Txd / UART_RxdJ2UART transfer/recieve


On-board Peripherals

Page properties
hiddentrue
idComments

Notes :

  • add subsection for every component which is important for design, for example:
    • Two 100 Mbit Ethernet Transceiver PHY
    • USB PHY
    • Programmable Clock Generator
    • Oscillators
    • eMMCs
    • RTC
    • FTDI
    • ...
    • DIP-Switches
    • Buttons
    • LEDs


Scroll Title
anchorTable_OBP
titleOn board peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault

...

RTC 

The RTC has an I2C Bus (2-wire SerialInterface) and offers temperature compensated time. The STC-Smart Temperature Compensation is calibrated in the factory and leads to a very high time-accuracy.

RTC intruppt is connected to MIO0 connected to Bank 500, pin G6.

Scroll Title
anchorTable_OBP_RTC
titleI2C interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicPinNotes
MIO15SDAU7-5On-board RTC, and EEPROM
MIO14SCLU7-4On-board RTC, and EEPROM

EEPROM

Chip/InterfaceDesignatorNotes
QSPI FlashU13---
EEPROMU11EEPROM
RTCU7Real Time Clock
DDR3 SDRAMU1Volatile Memory
EthernetU3, U10Two 100 Mbit Ethernet PHY
CAN TransceiverU16---
User LEDD4Green LED
OscillatorsU14, U7, U5Clock Sources


Quad SPI Flash Memory

On-board QSPI flash memory is used to store initial FPGA configuration. Besides FPGA configuration, remaining free flash memory can be used for user application and data storage. All four SPI data lines are connected to the FPGA allowing x1, x2 or x4 data bus widths. Maximum data rate depends on the selected bus width and clock frequency.

Quad SPI Flash (U7) is connected to the Zynq PS QSPI0 interface via PS MIO bank 500The Microchip Technology Inc. 24xx64 is a 64 Kbit Electrically Erasable PROM. The device is organized as a single block of 8K x 8-bit memory with a 2-wire serial interface. Lowvoltage design permits operation down to 1.7V, with standby and active currents of only 1 μA and 3 mA, respectively. It has been developed for advanced, lowpower applications such as personal communications or data acquisition. The 24xx64 also has a page write capability for up to 32 bytes of data. Functional address lines allow up to eight devices on the same bus, for up to 512 Kbits address space.

Scroll Title
anchorTable_OBP_EEPSPI
titleI2C EEPROM Quad SPI interface MIOs and pins

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematic
Pin
Notes
MIO15
MIO1
SDAU11-3On-board RTC, and EEPROM
MIO14SCLU11-1On-board RTC, and EEPROM

LEDs

SPI_CS
MIO2SPI_DQ0/M0
MIO3SPI_DQ1/M1
MIO4SPI_DQ2/M2
MIO5SPI_DQ3/M3
MIO6SPI_SCK/M4


RTC 

The RTC has an I2C Bus (2-wire SerialInterface) and offers temperature compensated time. The STC-Smart Temperature Compensation is calibrated in the factory and leads to a very high time-accuracy.

RTC interrupt is connected to MIO0 connected to Bank 500 through pin G6.

Scroll Title
anchorTable_OBP_I2C_RTC
titleI2C Address for RTC

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

Schematic
MIO Pin
Color
I2C Address
Connected to
Designator
Active LevelIO Standard
D9GreenDONELownot applicable
D8REDMIO7Highnot applicable
D4GreenBank 33 - V18HighLVCMOS33

DDR3 SDRAM

The TE0728 SoM has two 512 MByte volatile DDR3 SDRAM IC for storing user application code and data.

 Configuration of the DDR3 memory controller in the FPGA should be done using the MIG tool in the Xilinx Vivado Design Suite IP catalog.

Ethernet

There are two 100 MBit Extreme Temperature Ethernet provided by Texas Instrument on the board. Datasheet is provided TI website. Both PHY's are connected with all I/O Pins to FPGA Bank 34 (VCCIO = 3.3V). PHY Clock 25 MHz source is provided from MEMS Oscillator. There is no sharing of signals for the two PHY's.

PUDC pin is connected with pull-up to 3.3V those pre-configuration pull-ups are disabled by default. Strapping resistor exist to change the PUDC mode.

...

anchorTable_OBP_ETH
titleEthernet PHY to Zynq SoC connections

...

CAN Transceiver

...

Notes
MIO14...150x56U7Slave address


EEPROM

The Microchip Technology Inc. 24xx64 is a 64 Kbit Electrically Erasable PROM. The device is organized as a single block of 8K x 8-bit memory with a 2-wire serial interface. The 24xx64 also has a page write capability for up to 32 bytes of data. Functional address lines allow up to eight devices on the same bus, for up to 512 Kbits address space.

Scroll Title
anchorTable_OBP_I2C_EEPROM
titleI2C address for EEPROM

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinI2C AddressDesignatorNotes
MIO14...150x50U11Slave address


LEDs

Scroll Title
anchorTable_OBP_CANLED
titleCAN Tranciever interface MIOsOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

MIO PinSchematicPinNotes
MIO8DU16-1Driver Input
MIO9RU16-4Reciever Output

Low Dropout Linear Regulator

The low-dropout (LDO)  provides an easy-to-use robust power management  solution for a wide variety of applications. User programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic and well- suited for powering many different types of Monitoring or Provides a Sequencing Signal processors and ASICs. The enable input and power for Other Supplies good output allow easy sequencing with external regulators. This complete flexibility permits the user to configure a solution that meets the sequencing Voltage Startup requirements of FPGAs, DSPs, and other applications with special start-up requirements.

...

sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorColorConnected toActive Level
D9GreenDONELow
D8REDMIO7High
D4GreenBank 33 - V18High


DDR3 SDRAM

The TE0728 SoM has a volatile DDR3 SDRAM, 256Mx16bit (512MB), IC for storing user application code and data. Size of DDR3 can be varied in different assembly versions.

  • Part number: NT5CB256M16CP-DIH
  • Supply voltage: 1.5V
  • Organization: 256M x 16 bits

DDR3 SDRAM can be varied on demand for other assembly options. DDR3 can have density of maximum 512MB due to available addressing. The maximum possible speed for DDR3 SDRAM is 1066 Mb/s.

Ethernet

There are two 100 MBit Extreme Temperature Ethernet provided by Texas Instrumen on the board. Datasheet is provided at TI website. Both PHY's are connected with all I/O Pins to FPGA Bank 34 (VCCIO = 3.3V). PHY Clock 25 MHz sources is provided from MEMS Oscillator. There is no sharing of signals for the two PHY's.

PUDC pin is connected with pull-up to 3.3V those pre-configuration pull-ups are disabled by default. Strapping resistor exist to change the PUDC mode.

Scroll Title
anchorTable_OBP_CLKETH
titleOsillatorsEthernet PHY to Zynq SoC connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

ICDescriptionFrequencyUsed as
U14MEMS Oscillator50 MHzPS PLL clock
U5MEMS Oscillator25 MHzEthernet PHY Clock
U7RTC (internal oscillator)32.768 KHzUsed by RTC, CLKOUT of RTC not connected

Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of 3.5 A for system startup is recommended.

Power Consumption

...

anchorTable_PWR_PC
titlePower Consumption

...

BankSignal NameETH1ETH2Signal Description
34ETH-RSTM15R16Ethernet reset, active-low.
34ETH_COLL16P20
34MDCP16T17

Ethernet management clock.

34MDIOM16T16Ethernet management data.
34ETH_TX_D0J22N22Ethernet transmit data 0. Output to Ethernet PHY.
34ETH_TX_D1M17P21Ethernet transmit data 1. Output to Ethernet PHY.
34ETH_TX_D2K21P22Ethernet transmit data 2. Output to Ethernet PHY.
34ETH_TX_D3M22R21Ethernet transmit data 3. Output to Ethernet PHY.
34ETH_TX_ENJ21M21Ethernet transmit enable.
34ETH_RX_D0L17R18Ethernet receive data 0. Input from Ethernet PHY. 
34ETH_RX_D1K18R19Ethernet receive data 1. Input from Ethernet PHY. 
34ETH_RX_D2J18T18Ethernet receive data 2. Input from Ethernet PHY. 
34ETH_RX_D3J20T19Ethernet receive data 3. Input from Ethernet PHY. 
34ETH_RX_DVN17P15Ethernet receive data valid.


CAN Transceiver

Controller Area Network (CAN) transceivers are designed for use with the Texas Instruments TMS320Lx240x 3.3-V DSPs with CAN controllers. The datasheet is available in TI website. Each CAN transceiver is designed to provide differential transmit capability to the bus and differential receive capability to a CAN controller at speeds up to 1 Mbps. 

Scroll Title
anchorTable_OBP_CAN
titleCAN Tranciever interface MIOs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

BankSignal nameNotes
500D - TxDriver Input
500R - RxReciever Output


Oscillators

Scroll Title
anchorTable_OBP_CLK
titleOsillators

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorDescriptionFrequencyUsed as
U14MEMS Oscillator50 MHzPS_CLK
U5MEMS Oscillator25 MHzEthernet PHY Clock
U7RTC (internal oscillator)32.768 KHzCLKOUT of RTC is not connected


Power and Power-On Sequence

Power Supply

Power supply with minimum current capability of 2.5A for system startup is recommended.

Power Consumption

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input PinTypical Current
VINTBD*


* TBD - To Be Determined

Power Distribution Dependencies

Scroll Title
anchorFigure_PWR_PD
titlePower Dependencies


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTE7028_PWR_PD
simpleViewerfalse
linksauto
tbstylehidden
lboxfalse
diagramWidth641
revision8


Scroll Only

Image Added


Power on Sequence

The TE07028 SoM meets the recommended criteria to power up the Xilinx Zynq properly by keeping a specific sequence of enabling the on-board DC-DC converters and regulators dedicated to the particular functional units of the Zynq chip and powering up the on-board voltages. When

* TBD - To Be Determined

Power on Sequence

The PS and PL power supplies are fully independent. PS power supplies (VCCPINT, VCCPAUX, VCCPLL, VCCO_DDR, VCCO_MIO0, and VCCO_MIO1) can be powered before or after any PL power supplies. The PS and PL power regions are isolated to prevent damage. The recommended power-on sequence is VCCPINT, then VCCPAUX and VCCPLL together, then the PS VCCO supplies (VCCO_MIO0, VCCO_MIO1, and VCCO_DDR) to achieve minimum current draw and ensure that the I/Os are 3-stated at power-on. The PS_POR_B input is required to be asserted to GND during the power-on sequence until VCCPINT, VCCPAUX and VCCO_MIO0 have reached minimum operating levels to ensure PS eFUSE integrity. 

...

anchorFigure_PWR_PS
titlePower On Sequence

...

scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

...

Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Removed

Power Distribution Dependencies

...

anchorFigure_PWR_PD
titlePower Dependencies

...

Scroll Only

Image Removed

The PS and PL power supplies are fully independent. PS power supplies (VCCPINT, VCCPAUX, VCCPLL, VCCO_DDR, VCCO_MIO0, and VCCO_MIO1) can be powered before or after any PL power supplies. The PS and PL power regions are isolated to prevent damage. The recommended power-on sequence is VCCPINT, then VCCPAUX and VCCPLL together, then the PS VCCO supplies (VCCO_MIO0, VCCO_MIO1, and VCCO_DDR) to achieve minimum current draw and ensure that the I/Os are 3-stated at power-on. The PS_POR_B input is required to be asserted to GND during the power-on sequence until VCCPINT, VCCPAUX and VCCO_MIO0 have reached minimum operating levels to ensure PS eFUSE integrity.

Voltage Monitor Circuit

The microprocessor supervisory circuits monitor system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user adjustable delay time after the SENSE voltage and MR return above their thresholds. Datasheet is available in Texas Instruments website.

When the U8 and U9 generates PWRGD signal, it turns on the U4 which generates PWRGD_3.3V, it turns on the U6 and it generates PWROK signal which is connected to MR. Whenever the supply voltage for U12 drops down below the threshold it resets the system. Actually it resets the system when all regulators are working.

...

Scroll Title
anchorTableFigure_PWR_PR
titleModule power rails.
Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
stylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B Name

B2B

JM1 Pin

B2B

JM2 Pin

B2B

JM3 Pin

DirectionNotes
VIN1,3--InputSupply voltage from carrier board.
VCCO_1339--I/O
VBATT-1-OutputRTC Supply voltage
3.3V192, 425,57OutputInternal 3.3V voltage level.

1.8V

-5-OutputInternal 1.8V voltage level.

Bank Voltages

...

anchorTable_PWR_BV
titleZynq SoC bank voltages.

...

Bank          

...

Voltage

...

VCCO_MIO1_500

...

Supplied by the carrier board. JM2,JM3

Board to Board Connectors

...

hiddentrue
idComments

...

PS
titlePower On Sequence


Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTE0728_PWR_PS
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth649
revision7


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


Voltage Monitor Circuit

The microprocessor supervisory circuits monitor system voltages asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user adjustable delay time after the SENSE voltage and MR return above their thresholds. Datasheet is available in Texas Instruments website.

Scroll Title
anchorFigure_PWR_VMC
titleVoltage Monitor Circuit


Scroll Ignore
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramNameTE0728_PWR_VMC
simpleViewerfalse
linksauto
tbstylehidden
lboxtrue
diagramWidth644
revision4



Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

Image Added


Power Rails

...

6 x 6 modules use two or three Samtec Micro Tiger Eye Connector on the bottom side.

  • 3 x REF-189018-01 (compatible to SEM-140-02-03.0-H-D-A), (80 pins, "40" per row)

    Operating Temperature:-55°C ~ 125°C
    Current Rating: 2.6A per ContactNumber of Positions: 80
    Number of Rows: 2

Technical Specifications

Absolute Maximum Ratings

...

Scroll Title
anchorTable_TSPWR_AMR_PSPR
titlePS absolute maximum ratingsModule power rails.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnit
VCCPINTPS internal logic supply voltage-0.51.1V
VCCPAUXPS auxiliary supply voltage-0.52.0V
VCCPLLPS PLL supply-0.52.0V
VCCO_DDRPS DDR I/O supply voltage-0.52.0V
VPREFPS input reference voltage-0.52.0V
VCCO_MIO0PS MIO I/O supply voltage for HR I/O banks-0.53.6V
VCCO_MIO1PS MIO I/O supply voltage for HR I/O banks1.713.45V

...

Power Signal

B2B

JM1 Pin

B2B

JM2 Pin

B2B

JM3 Pin

DirectionNotes
VIN1,3--InputSupply voltage from carrier board.
VCCO_1339--Input
VBATT-1-OutputRTC Supply voltage
3.3V19425,57OutputInternal 3.3V voltage level.
VMIO

-

2
InputVariable and supplied by carrier

1.8V

-5-OutputInternal 1.8V voltage level.


Bank Voltages

Scroll Title
anchorTable_TSPWR_AMR_PLBV
titlePL absolute maximum ratingsZynq SoC bank voltages.

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolsDescriptionMinMaxUnit
VCCINTPL internal logic supply voltage-0.51.1V
VCCPAUXPL auxiliary supply voltage-0.52.0V
VCCPLLPL PLL supply-0.51.1V
VPREFPL input reference voltage-0.52.0V
VCCOPL supply voltage for HR I/O banks-0.53.6V
VINI/O input voltage for HR I/O banks1.713.45V

...

cellHighlightingtrue

Bank          

Schematic Name

Voltage

I/O TypeNotes
500VCCO_MIO0_5003.3VMIO
501

VCCO_MIO1_501

2.5V or 3.3VMIOsupplied by carrier.
502VCCO_DDR_5021.5VDDR3
13VCCO_131.8V or 3.3VHRSupplied by the carrier board. J1
333.3V3.3VHRSupplied by carrier board. J3
343.3V3.3VHR


353.3V3.3VHR

Supplied by the carrier board. J2, J3


Board to Board Connectors

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.
  • use "include page" macro and link to the general B2B connector page of the module series, for example: 4 x 5 SoM LSHM B2B Connectors

    Include Page
    6 x 6 SoM LSHM B2B Connectors
    6 x 6 SoM LSHM B2B Connectors

Include Page
6 x 6 SoM TEM and SEM B2B Connectors
6 x 6 SoM TEM and SEM B2B Connectors

Technical Specifications

Absolute Maximum Ratings

widths

Scroll Title
anchorTable_TS_ROCAMR
titleRecommended operating conditionsAbsolute maximum ratings

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault

style
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Parameter
SymbolsMinMax
Units
Unit
Reference Document
Description
VIN supply voltage-0.3
.5
60
65VTPS54260-Q1 datasheets.
Supply voltage for PS MIO banks1.71
VMIO-0.53.
465
6V
See Xilinx DS187 datasheet.I/O input voltage for
PS MIO
banks-0.2VCCO_MIO + 0.20VSee Xilinx DS187 datasheet.Supply voltage for PS DDR1.141.89VSee Xilinx DS187 datasheet.
I/O
input voltage for PS DDR
supply voltage
VCCO-0.
20VCCO_DDR + 0.20
53.6V
See Xilinx DS187 datasheet.Supply
PL supply voltage for HR I/
Os banks1.143.465VSee Xilinx DS187 datasheet.I/O input voltage for HR I/O banks-0.20VCCIO + 0.20VSee Xilinx DS187 datasheet.Storage Temperature-65150°CSee Xilinx DS187 datasheet.CAN Transceiver Temperature-40125°CSee Texas Instrument sn65hvd230q-q1 datasheet.SPI Flash Memory-4085°CSee Cypress S25FL127S datasheet.DDR3 SDRAM Temperature-4095°C

See Nanya NT5CC256M16CP-DIA datasheet.

Temprature range: -40°C to +85°C.

Operating temperature range depends also on customer design and cooling solution. Please contact us for options.

O banks
Storage Temperature-40+85°C


Recommended Operating Conditionse

Scroll Title
anchorTable_TS_ROC
titleRecommended operating conditions

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

SymbolMinMaxUnitsReference Document
VIN supply voltage3.560VTPS54260-Q1 datasheets.
VMIO1.713.465VSee Xilinx DS187 data sheet.
VCCO1.143.465VSee Xilinx DS187 datasheet.
Operating Temperature-40+105°C


Physical Dimensions

  • Module size: 60 mm × 60 mm.  Please download the assembly diagram for exact numbers.

  • Mating height with standard connectors: 7 mm.

  • PCB thickness: 1.6 mm.

Scroll Title
anchorFigure_TS_PD
titlePhysical Dimension


Scroll Ignore

draw.io Diagram
width
borderfalse
viewerToolbartrue
fitWindowfalsediagramDisplayName
lboxfalse
falserevision20
diagramNameTE0728_MC1
simpleViewertrue
600linksauto
tbstylehidden
lboxfalse
diagramWidth632
revision221721


Scroll Only
scroll-pdftrue
scroll-officetrue
scroll-chmtrue
scroll-docbooktrue
scroll-eclipsehelptrue
scroll-epubtrue
scroll-htmltrue

...


Currently

...

Offered Variants 

Page properties
hiddentrue
idComments

...

Scroll Title
anchorTable_VCP_SO
titleTrenz Electronic Shop Overview

Scroll Table Layout
widths
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstyle
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Trenz shop TE0728 overview page
English pageGerman page


Revision History

Hardware Revision History

Product changes can be seen in PCN page.

Scroll Title
anchorTable_RH_HRH
titleHardware Revision History

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionNotePCNDocumentation Link
-01Prototypes--
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionChanges

 2016-08-18

04
  • U1 DDR3 IC changed from NT5CB256M16CP-DIH to NT5CC256M16CP-DIH
  • Net DDR3-ODT0: added series resistor R55
  • Added Traceability pad
  • Net PS-POR-B: added pull-down resistor R56
 2015-12-0103
  • ...
2015-06-1202
  • ...
2015-03-0301
  • ...


Hardware revision number is printed on the PCB board next to the module model number separated by the dash.

...

Page properties
hiddentrue
idComments
  • Note this list must be only updated, if the document is online on public doc!
  • It's semi automatically, so do following
    • Add new row below first

    • Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf PDF export template

    • Metadata is only used of compatibility of older exports

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
style
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
widthssortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse

Page info
infoTypeModified by
typeFlat
showVersionsfalse

change list
  • smale style update

2019-05-16v. 367Pedram Babakhani
  • initial release

--

all

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


...