Page History

...

<!-- tables have all same width (web max 1200px and pdfPDF full page(640px), flexible width or fix width on menu for single column can be used as before) -->
<style>
.wrapped{
  width: 100% !important;
  max-width: 1200px !important;
 }
</style>

...

...

...

Trenz Electronic TE0728 is an automotive-grade FPGA module integrating a Xilinx Automotive an Automotive Xilinx  Zynq-7020 7 FPGA, two 100 Mbit Ethernet transceivers (PHY) , 512 MByte DDR3L SDRAM, 16 MByte DDR3 SDRAM, QSPI Flash memory for configuration and operation, and powerful switching-mode power supplies for all on-board voltages. Numerous configurable I/Os are provided via rugged high-speed strips. 

...

• Xilinx
XA7Z020
• XC7Z020-1CLG484Q (Automotive)
• Rugged for shock and high vibration
• Dimensions: 6 x 6 cm
Temperature range: Automotive
• [XA7Z014S is available on other assembly options]
  • Package: CL/CLG484
  • Speed Grade: -1
  • Temperature Grade: Expanded (-40 to +128 °C)
• • 
    
• Dual-Core ARM Cortex-A9 MPCore
  
• 2 x 100 MBit Ethernet transceiver (PHY)
• 512 MByte DDR3L SDRAM, 16-bit-wide 
• DDR3 SDRAM, up to 512MB, up to 1066 Mb/s, connected to PS  [different size is available on other assembly options]
16 MByte
• QSPI Flash memory (with XiP support)
• Plug-on module with 3 x 80-pin Samtec Micro Tiger Eye(TM) high-speed connectors
76 single ended I/O, 24 LVDS pairs (48 I/O) and 42 MIO available on board-to-board connectors
• [different size is available on other assembly options]
• Programmable SIT8918A , PS clock generator
• 2 Kbit serial EEPROM
• Three user LEDs
• CAN transceiver (PHY)
• 12 V power supply with watchdog
• On-board high-efficiency DC-DC converters
System management and power sequencing
• eFUSE bit-stream encryption
• AES bit-stream encryption
• Temperature compensated RTC (real-time clock)
• Three user LEDs
• Evenly-spread supply pins for good signal integrity

Depending on the customer design, additional cooling might be required.

Block Diagram

• 2 x 100 MBit Ethernet transceiver (PHY)
• Board to Board (B2B)
  • Plug-on module with 3 x 80-pin Samtec Micro Tiger Eye(TM) high-speed connectors
• I/O Interface
  • 42x MIO
  • 200x HR
  • 128x PS IO
  • 0x GTP Transceiver
  • 0x GTX Transceiver

• Power Supply
  • 12 V power supply with watchdog
• Others:
  • Dimensions: 6 x 6 cm
  • Rugged for shock and high vibration
  • On-board high-efficiency DC-DC converters
  • System management and power sequencing
  • eFUSE bit-stream encryption
  • AES bit-stream encryption
  • Evenly-spread supply pins for good signal integrity
    
    

Block Diagram

Main Components

...

1. 512 MByte DDR3 SDRAM, U1
2. Xilinx Automotive XA7Z020-1CLG484Q ,U2
3. 100 MBit Ethernet transceiver, U3
4. 100 MBit Ethernet transceiver, U10
5. User LED Green, D4
6. Real Time Clock, U7
7. Standard Clock Oscillators @ 25MHzOscillators, U5
8. 1.5 A Low Dropout Linear Regulator, U6
9. Real Time Clock, Micro Crystal @32.768 MHz, U7
10. 100 MBit Ethernet transceiver, U10
11. 64 Kbit I2C EEPROM, U11
12. Low-Quiescent-Current Proggrammable Delay Supervisory Circuit, U12
13. CAN Tranceiver, U16
14. QSPI NOR 16 MByte QSPI Nor Flash memory, U13
15. Standard Clock Oscillators @ 50MHzOscillators, U14
16. Low-Quiescent-Current Priggrammable Programmable Delay Supervisory Circuit, U15
17. CAN Tranceiver, U16Low-Quiescent-Current Programmable Delay Supervisory Circuit, U12
18. B2B connector , JM2
19. B2B connector , JM3
20. B2B connector  Samtec Micro Tiger Eye Connector  SEM-140-02-03, JM1
    User LED Greenconnector , JM1

FPGA (U2), DDR3 SDRAM (U1) and QSPI (U13) can be  varied on other assembly option, for more information contact us. 

Initial Delivery State

...

Configuration Signals

...

Zynq-7020SoC  includes a reset that is driven by the reset system. Hardware resets are driven by the power-on reset signal (Reset) connected to carrier and the system reset signal (PS_SRST_B)  connected to VMIO, it means after power on the PS will be reset.