Page History

...

...

Industrial-grade Xilinx Kintex-7 FPGA module (70T*, 160T*, 325T, 410T)
* Device Devices supported by the free Xilinx Vivado WebPACK software.
256-Mbit (32-MByte) Quad SPI Flash memory (for configuration and operation) accessible through:
- FPGA
- JTAG port (SPI indirect (Bus width x4))
8 GTX transceivers
FPGA configuration through:
- JTAG (B2B connector)
- SPI Flash memory
25 MHz low jitter oscillator with shutdown control
Programmable quad PLL clock generator
On-board high-efficiency DC-DC converters
- GTX voltage regulators with control enable
- Core voltage regulator: 20A (2 x Enpirion DC/-DC regulators with load-sharing)
- Supply voltages: either 3.3V or 3.3V and 5V
Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
Up to 144 (94 for 70T) FPGA I/O pins available on B2B strips (up to 65 LVDS pairs possible)
2 user LED's, 1 DONE FPGA pin LED, 1 System Controller status LED
System management and power sequencing
AES bit-stream encryption
eFUSE bit-stream encryption
Evenly spread supply pins for good signal integrity
Assembly options for cost or performance optimization available on request

...

Storage device name	Content	Notes
SPI Flash OTP Area	Empty, not programmed	Except serial number programmed by flash vendor.
SPI Flash Quad Enable bit	Programmed	-
SPI Flash main array	Demo design	-
EFUSE eFUSE USER	Not programmed	-
EFUSE eFUSE Security	Not programmed	-

Table 1: Initial delivery state.

...

All dimensions are shown in millimeters.

Image Modified

Figure 7: Physical Dimensions dimensions of the TE0741-02 board.

...

19 g - Plain module.

...

8.8 g

...

- Set of nuts and bolts.

Revision History

...