Page History
...
Summary of VCCIO- and supply-voltage-configuration via jumpers
There are two base board supply-voltages VIOTA, VIOTB and for the 4x5 SoM's PL IO-banks. The supply-voltages have following pin assignments on B2B-connectors:
base-board VCCIO | base-board B2B connector-pins | standard assignment of PL IO-bank supply-voltages on TE 4x5 modules B2B connectors | base-board voltages and signals connected with |
|---|---|---|---|
| VIOTA | JB2-2, JB2-4, JB2-6 | VCCIOB (JM2-1, JM2-3) / VCCIOC (JM2-5) | HDMI_SCL, HDMI_SDA, HDMI_INT, J5 VCCIO |
| VIOTB | JB1-10, JB1-12, JB2-8, JB2-10 | VCCIOA (JM1-9, JM1-11) / VCCIOD (JM2-7, JM2-9) | VCCIO1 (Systm-Controller-CPLD pin 55, 73) |
...
supported 4x5 SoMs vs base-board VCCIO | TE0710 | TE0711 | TE0712 | TE0713 | TE0715-xx-15 | TE0715-xx-30 | TE0720 | TE0741 | TE0841 |
|---|---|---|---|---|---|---|---|---|---|
| VIOTA | NC | B34 (VCCIOB) | B13 (VCCIOB) | - | B34 (VCCIOC) | B34 (HP bank, VCCIOC) | B33 (VCCIOC) B34 (VCCIOB) | B15 (VCCIOC) B16 (VCCIOB) | B66 (HP bank, VCCIOB) B68 (HP bank, VCCIOC) |
| VIOTB | B15 (VCCIOA) B34 (VCCIOD) | B15 (VCCIOA) B35 (VCCIOD) | B16 (VCCIOA) B15 (VCCIOD) | - | B13 (VCCIOA) B35 (VCCIOD) | B13 (VCCIOA) B35 (HP bank, VCCIOD) | B35 (VCCIOA) B13 (VCCIOD) | B13 (VCCIOA) B12 (VCCIOD) | B64 (VCCIOA) B67 (HP bank, VCCIOD) |
T
Following table describes how to configure the base-board supply-voltages by jumpers:
base-board supply-voltages vs voltage-levels | VIOTA | VIOTB | USB-VBUS | 12V0_CL |
|---|---|---|---|---|
| 3V3 | J17:1-2, 3 & J16: open | J17: 1-2, 3 & J16: open & J21:1-2, 3 | - | - |
| 2V5 | J17:1, 2-3 & J16: open | J17:1, 2-3 & J16: open & J21: 1-2, 3 | - | - |
| FMC-VADJ | J17: open & J16: 1-2 | J21:1, 2-3 | - | - |
| 5V0 intern | - | - | J9:1-2, 3 & J19: 1-2 (J20: 1-2: additional blocking-capacitors) | - |
| Vbus extern | - | - | J9: 1, 2-3 & J19: open | - |
| 12V_LC | - | - | - | J18: 1-2 |
Table 6: Configuration of base-board supply voltages via jumpers
...
Overview
Content Tools