Page History

...

Power supply with minimum current capability of 3A at 12V for system startup is recommended.

Power-On Sequence

The on-board voltages 3.3V and 5.0V of the carrier board will be powered-up simultaneously after one single power-supply with a nominal voltage of 12V is plugged on the barrel jack J10.

The on-board voltages 1.8V and 2.5V will be powered up after the module's 3.3V voltage-level has reached stable state and 3.3VOUT is available on the B2B-connector JB2, pins 9 and 11.

The PL IO-bank supply voltage FMC_VADJ will be available after the output of the 5.0V-DCDC-converter is active and the pin EN_FMC of the SC-CPLD is asserted.

 Image Added

TE0701 jumper and DIP switch overview

...