Page History
...
Signals, Interfaces and Pins
On-board connectors
Bank | Type | Connector | I/O Signal Count | Voltage | Notes |
---|---|---|---|---|---|
0 | JTAG | J2 | 4 | 3.3 | JTAG interface. |
34 | HR | P1 | 8 | 3.3 | |
34 | HR | P2 | 8 | 3.3 | |
34 | HR | P2 | 10, 5 LVDS pairs | 3.3 | |
34 | HR | J1 | 6 | 3.3 | |
34 | HR | J2 | 2 | 3.3 | |
34 | HR | J3 | 4 | 3.3 | |
35 | HR | P1 | 8, 4 LVDS pairs | 3.3 | |
501 | MIO | J8 | 7 | 3.3 |
JTAG Interface
JTAG access to the Xilinx ZYNQ XC7Z010 SoC is provided through J2 connector.
...
On-board I2C interface is provided via ZYNQ SoC PS bank 501 pins MIO36 (SCL) and MIO37 (SDA). I2C addresses for on-board devices are listed in the table below:
I2C Device | I2C Address | Notes |
---|---|---|
Si1143-A11-GMR | 0x5A | Proximity and ambient light sensor. |
Technical Specifications
Absolute Maximum Ratings
...
Parameter | Min | Max | Units | Reference Document |
---|---|---|---|---|
Supply voltage | 1.14 | 3.465 | V | Xilinx datasheet DS187, "Zynq-7000 All Programmable SoC: DC and AC Switching Characteristics". |
Operating temperature | 0 | +85 | °C | Commercial range devices. |
Operating temperature | -40 | +100 | °C | Industrial range devices. |
Note |
---|
Assembly variants for higher storage temperature range are available on request. |
...
Overview
Content Tools