Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Xilinx ZYNQ UltraScale+ MPSoC, U1
  2. 2-Input AND Gate, U39
  3. Red LED (DONE), D1
  4. 256Mx16 DDR4-2400 SDRAM, U12
  5. 256Mx16 DDR4-2400 SDRAM, U9
  6. 256Mx16 DDR4-2400 SDRAM, U2
  7. 256Mx16 DDR4-2400 SDRAM, U3
  8. 12A PowerSoC DC-DC converter, U4 (either TPS548A28RWWR or MPQ8633BGLE-Z is assembled which is up to Trenz Electronic GmbH)
  9. 1.5A LDO DC-DC converter, U10
  10. 1.5A LDO DC-DC converter, U8
  11. Voltage monitor circuit, U41
  12. 0.35A LDO DC-DC converter, U26
  13. 0.35A LDO DC-DC converter, U27
  14. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J3
  15. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J1
  16. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J4
  17. Ultra fine 0.50 mm pitch, Razor Beam™ LP Slim Terminal Strip with 160 contacts, J2
  18. 4-channel programmable PLL clock generator, U5
  19. Low-power programmable oscillator @ 25.000000 MHz, U5
  20. Low-power programmable oscillator @ 33.333333 MHz (PS_CLK), U32
  21. 256 Mbit serial NOR Flash memory, U7
  22. 256 Mbit serial NOR Flash memory, U17

...

 Storage device name

Content

Notes

User configuration EEPROMs with MAC address (1x Microchip 24LC128-I/ST, 3x Microchip 24AA025E48T-I/OT)

Not programmed

available since PCB REV02

SPI Flash main array

Not programmed

-

eFUSE Security

Not programmed

-
Si5338A programmable PLL NVM OTPNot programmedOnly vilatile volatile memory is progammable programmable of field. NVM can't be programm program on field. Custom assembly variant with preprogrammed NVM is possible on request

...

Table 12: B2B connector pin-out of Si5338A control interface

Note

Si5338A OTP ROM Si5338A  NVM  is not programmed by default at delivery, so it . It is customers responsibility to either configure Si5338A volatile memory during FSBL or then use Silicon Labs programmer.  Custom assembly variant with preprogrammed NVM is possible on request.

Refer to Si5338A datasheet for more information.

...

Figure 3: Power Distribution Diagram (For U4 either TPS548A28RWWR or MPQ8633BGLE-Z is assembled which is up to Trenz Electronic GmbH)

Note

Current rating of Samtec Razor Beam LP Terminal/Socket Strip ST5/SS5 B2B connectors is 1.5 A per pin (1 pin powered per row).

...

 DateRevisionContributorsDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
dateFormatyyyy-MM-dd
prefixv.
typeFlat

Page info
infoTypeModified by
typeFlat

  • Added note regarding DCDC U4.
22-02-25


v.50


John Hartfiel


  • Add Note to PLL
22-02-08v.46John Hartfiel
  • Correction on Power section
  • Correction GTH Clock connection
2021-05-17v.41John Hartfiel
  • typo correction in DDR section
2021-03-11v.40John Hartfiel
  • typo
  • fixed MGT Lanes RX/TX order
2019-07-15v.36John Hartfiel
  • correction SPLL section
2019-07-02v.35John Hartfiel
  • add eeprom section
  • update PCB Revision section
2019-06-19v.33John Hartfiel
  • update links
  • correction flash section

2018-08-20

v.29John Hartfiel
  • power section: add missing PS_1V8 output pin

2018-08-06

v.28John Hartfiel
  • typo correction
2017-11-13v.23Ali Naseri
  • updated B2B connector max. current rating per pin

2017-11-13

v.19



John Hartfiel
  • rework B2B section
2017-10-19

v.18

John Hartfiel
  • Removed ES1 Note
2017-08-15v.17Vitali Tsiukala
  • Changed Signals Count in the table B2B-connectors

2017-08-07


v.14

Jan Kumann
  • New smaller images.
  • New QSPI Flash MIO mapping table.
  • Temperature information changes.
  • Few corrections.

2017-05-17

V.4


Ali NaseriCurrent TRM release.
2017-05-10v.1Ali NaseriInitial document.

...