...

Onboard a Maxim 1-Wire Temperature sensor DS18S20Z+ is available, which is located on the potential of the FPGA board as close as possible to the central motor MOSFETs.
Addional 1-Wire temperature sensor can be connected by wire to connector J16:

Image Added

• Pin 1(DQ), 3 (GND),5 (+3.3V) at the same 1-wire bus as the onboard one
• Pin 2(DQ), 4 (GND),6 (+3.3V) at a separate 1-wire bus

Power and Power-On Sequence

...