Page History
...
+ DC 5...48V Optional Motor Supply
SAFETY INSTRUCTIONS:
...
This option is
- only usable at your own risk
- only allowed to be used for electrical specialist for the used electical voltage and power conditions
- only allowed to be used under electrical laboritory conditions
- only allowed to be used in horizontal position on a non conducting surface
...
- only allowed to be used, if the "Eval Boad high current signals" conducting up to 30A nominal, are covered by isolating, mechanically stable material
The "Eval Boad high current signals" are the motor outputs A, B, C and
...
Fuse F1 Connectors J5 an J6
...
and
...
further internal connections shown white marked in the following picture:
- Highly recommended is to use the delivered "Isolating cover PCB" (marked in green), which needs to be mounted to the mounting holes H1, H9, H3, H4 with the deliverd 10mm isolating spacers
...
- :
- The used cable lugs need to be isolated in the area outstanding the outer border of the Eval Board
- :
...
- .
Intention is to make sure that the "Isolating Cover PCB" is overlapping the conducting material by a minimum of 2 cm.
- .
...
Initial operation
The option 2
...
This motor supply is only usable after the following steps are done:
...
Overview
Content Tools