Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


It's recommended to use the board part files only for this Vivado Version, for which it has been provided. Depending on the Schema Version of the XML-Files and Xilinx IP definitions, it is possible to use them with other Vivado versions, see Xilinx ug895.

Table of contents

Table of Contents

Naming Conventions and Version


Board Part Files consists on a base folder, a version sub folder with three xml files and on one picture:

  • Every assembly option of a module/carrier series where FPGA-Typ (Size, Speed/Temperature Grade, Temp grade) is changed, gets a new base folder.
  • Every other assembly option or PCB-revision change, which has affects on the reference design settings, gets a new version sub folder.


Board Part Names of the base folder consists of max. three parts separated by underline character.


Usage of the part of nameExample 1Example 2Example 3Example 4
Name of the PCB SeriesAlwaysTE0726TE0745TE0720TE0711
FPGA SizeOptional 
FPGA Speed/Temperature GradeOptional  



Board Part Version Folder

Version folder Name consists on a major and minor number separated by a dot (<major>.<minor>, example 1.0) Different Version folder means:

  • changes Changes on assembly option, which has effects on the reference design, for example DDR Size
  • Boart Part for special Carrier/Module combination
  • changes Changes on PCB-Revision, which has effects on the reference design

Attention: Changes on the settings of the TE Board Part Files by itself are not under version control at the moment, like described in Xilinx ug895.  XML file includes a comment header with the date of the last change of the selected file.


Board Part Files will be delivered with our Reference Designs on our<group>/<form factor>/<module_name>/Reference_Design/<vivado_version>/<design_name>.

Board Part Files are locate in the subfolder <designsub folder <design_name>/board_files/ of the downloadable Reference Design. For more detailed information of the zip-file folder structure see: Project Delivery - Directory Structure.

This folder includes also a *_board_files.csv file with a list of all available board parts. This list is only used by TE-Scripts.

Select Correct Board Part Files


Since 2018.3 special "Module Selection Guide" is included into "_create_win_setup.cmd" and ""

  • Execute "_create_win_setup.cmd" or ""
  • Select "Module Selection Guide" (press "0" and Enter)
  • Follow instructions

  • Check <design_name>/board_files/<board_series>_board_files.csv for available board part of the reference design:


  • - The table shows all available board parts, which are delivered with the reference design
    - "ID" Unique ID for every board file in the project delivery
    - "PRODID" is the  whole article name, latest reference design are available with all variants
    - "PARTNAME is the FPGA device setting of Vivado for the assembly variant
    - "BOARDNAME" is  the corresponding board part file, which is used, files location is in "./board_files/<basename>/<Xil file id>/"
    - "SHORTNAME" is the name for the board part specific sub folders in the reference design
    - "ZYNQFLASHTYP" is the setting to configure the Flash via SDK
    - "FPGAFLASHTYP" is the setting to configure the Flash via Vivado (first part only), the second and third part are QSPI mode and memory size in MB
    - "PCB_REV" is supporte PCB Revision
    -"DDR_SIZE"  is DDR size if available
    -"FLASH_SIZE"  is Flash size if available
    -"EMMC_SIZE"  is eMMC size if available
    -"OTHERS"  other HW notes
    -"NOTES"  additional notes
    -"DESIGN"  filter for the reference design usage
    Image Added
  • Check your order number and/or TE shop page to get module information of your PCB:



  • /sh:
    Use unique name from CSV list (see 1.)
        - Unique names are ID or PRODID (in the most cases) or BOARDNAME or SHORTNAME
        - Revision number of the PRODID is the last one, which was available on last board part update. If there is no special board part for older revisions, this will be backward compatible. Please verify this on Vivado, see 4.
    Image Added
    See Reference Design: Getting Started for more details.
  • Create Vivado Project with vivado_create_project_guimode.cmd/sh
  • Verify your board part selection on Vivado "Project Summary" tap:


  • Image Modified


See Vivado Board Part Installation and Project Delivery - QuickStart