...
The Trenz Electronic TEBT0808 is a test fixture for module TE080x TE0808(REV02, REV03) and TE0803(REV01) series.
Refer to http://trenz.org/tebt0808-info for the current online version of this manual and other available documentation.
...
- Modules
- On Board
- Done/Error/Status LEDs
- MEMS Oscillator 125.00 MHz
- Boot Mode DIP-Switch
- 2x DIP-Switches to control TE080x power domains
- Interface
- Single 3.3V input (Direct modules power supply)
- Header for TE0790 JTAG/UART Adapter
20 Pin (connected to MIO JTAG 0)10 I2C header for Silabs Clock Builder Field ProgrammerDone, Error and Status LEDs- Header for I2C
- Board to Board (B2B) Connectors
- One PL GT with 4x SMA
connectors SMA connectors- GT local loopback
- PL I/O loopbacks
- PS I/O loopbacks
- Boot Mode switches
- Power control switches to control TE080x power domains
- 4x SMA Connectors
- One pre-assembled TE0790 XMOD FTDI JTAG adapter
...
- Power:
- 3.3 V (Nominal Supply Voltage)
- Dimension: 90mm x 90mm
Block Diagram
| Page properties |
|---|
|
add drawIO object here.
|
...
| Scroll Title |
|---|
| anchor | Figure_OV_BD |
|---|
| title | TEBT0808 Block Diagram |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| |
|---|
| fitWindow | false |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| revision | 1323 |
|---|
| diagramName | TEBT0808_OV_BD |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramWidth | 640636 |
|---|
|
|
| Scroll Only |
|---|
 Image Modified
|
|
Main Components
...
| Scroll Title |
|---|
| anchor | Figure_OV_BD |
|---|
| title | TEBT0808 Main Components |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | truefalse |
|---|
| viewerToolbar | true |
|---|
| |
|---|
| fitWindow | false |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| revision | 4 |
|---|
| diagramName | TEBT0808 | diagramName | TEBT0808_OV_MC |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramWidth | 640 |
|---|
| revision | 3 |
|---|
|
|
| Scroll Only |
|---|
 Image Modified
|
|
- Non-insulated Uninsulated Power Jack. J7-J8-J7
- SMA Coaxial straight. J6- J9...15
- Surface Mount Schottky Barrier Rectifier. D1
- ARM PJTAG Pin Header J16
- I2C Pin Header, J5Box Headers, Straight/Angled J5-J16
- Board to Board ConnectorConnectors. J1...4
- Clock MEMS Oscillator, U2
- On-Board LEDLEDs, D2...4
- DIP-Switch, S1...3
- XMOD JTAG Baseheader, JX1
Initial Delivery State
...
| Scroll Title |
|---|
| anchor | Table_OV_BP |
|---|
| title | Boot Process. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| M3 | M2 | M1 | M0 | Bootmode Hex | Bootmode | Notes |
|---|
| ON | ON | ON | ON | 0xF0b0000 | PS Main JTAG (TE0790 USB JTAG) | DIPs are inverted | | ON | ON | OFF | ON | 0xD0b0010 | SPI Flash (dual parallel, 4bit x 2, 32bit Addressing) | ONDIPs are inverted | | OFFOFF | ON | ON | OFFON | 0x80b1000 | PJTAG(MIO29:26) | DIPs are inverted |
|
| Scroll Title |
|---|
| anchor | Table_OV_RST |
|---|
| title | Reset Process. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Signal | B2B | Note |
|---|
PLL_RST | J2-89 |
| | SRST_B | J2-96 | Connected to PJTAG0_SRST - J16 |
|
...
Board to Board (B2B) I/Os
FPGA bank number and number TEBT0808 has four B2B Connectors and each connector has 160 pins. Number of I/O signals and Interfaces connected to the B2B connectorconnectors is as following table:
| Scroll Title |
|---|
| anchor | Table_SIP_B2B |
|---|
| title | General PL I/O to B2B connectors information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| B2B Connector | Interfaces | Number of I/O | Notes |
|---|
J1
| User I/O | 22 46 Single Ended, 11 23 Differential 8 16 Single Ended, 4 8 Differential8 16 Single Ended, 4 8 Differential8 16 Single Ended, 4 8 Differential 3 4 Single Ended | IOs are Loop-Back IOs are Loop-Back IOs are Loop-Back IOs are Loop-Back Connected to Bank 66 Connected to Bank 228 Connected to Bank 229 Connected to Bank 230 VCCO_66, PL_1V8 | J2
| Ethernet PHY User IO | 32 28 Single Ended, 16 14 Differential 4 6 Single Ended, 16 Differential Connected to Bank 505 Connected to Bank 1283 Differential | IOs are Loop-Back IOs are Loop-Back | | Boot Mode | 4 Single Ended | MODE0...3 | | Control Signals | 15 25 Single Ended | PLL_SEL0, PLL_SEL1, PLL_RST, EN_GTR, EN_PL, PLL_LOLN, EN_PSGT, ERR_STATUS, ERR_OUT,SRST_B, INIT_B, PROG_B, EN_FPD , EN_LPD , DONE | Power Control Signal | 10 Single Ended | , EN_PLL_PWR, PLL_FINC ,PG_PLL_1V8, LP_GOOD, PG_DDR, PG_PL, PG_FPD, PG_PSGT, PG_GT_R, PG_GT_L | | JTAG Interface | 7 Single Ended | TCK, TDI, TMS, TDO, MR, Rxd, Txd | | WANNE2I2C | 2 Single Ended | PLL_SCL, PLL_SDA | | Clock | 6 Single Ended, 3 Differential | CLK0, CLK7, CLK8 | J3
| User I/OIO | 12 24 Single Ended, 6 12 Differential 12 24 Single Ended, 6 12 Differential | Connected to Module FPGA, Bank 48 Connected to Module FPGA, Bank 47 | | Clock | 6 Single Ended, 3 Differential | CLK228, CLK229, CLK230 | | PJTAG Interface | 7 4 Single Ended | PJTAG0_TCK, PJTAG0_TDI, PJTAG0_TMS, PJTAG0_TDO, | | MIO | 27 45 Single Ended | MIO19MIO13..7677 | | UART | 2 Single Ended | TXD, RXD | | Power pinsControl Signals | 4 Single Ended | PS_1V8, SI_PLL_1V8, VCCO_48, VCCO_47, PLL_3V3 | | J4 | User I/O | 48 Single Ended, 62 24 Differential 48 Single Ended, 24 Differential 4 Single Ended 4 Single Ended | IOs are Loop-Back IOs are Loop-Back B64_T0...3 B65_T0...3 Connected to Bank 64 Connected to Bank 64 | | Power pins | 4 Single Ended | VCCO_64, VCCO65 |
|
...
SMA Coaxial Connectors
TEBT0808 is equipped with 8 SMD Coaxial Connectors. JTAG access to the TEBT0808 is available through B2B connector JM2 using XMOD JTAG adapter TE0790 adapter.
| Scroll Title |
|---|
| anchor | Table_SIP_JTGSMDCoax |
|---|
| title | JTAG Pins ConnectionSMD Coaxial Connectors |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
JTAG Signal| Schematic | B2B Connector | Notes |
|---|
TMS | J2- 126 | TDI | J2- 122 | TDO | J2- 124 | TCK | J2- 120 | |
There is a DIP switch on TE0790 adapter which must be set accordingly.
| J6 | B230_TX3_P | J1 |
| | J9 | B230_RX3_N | J1 |
| | J10 | B230_RX3_P | J1 |
| | J11 | B230_TX3_P | J1 | | J12 | B505_TX0_N | J2 |
| | J13 | B5050TX0_P | J2 |
| | J14 | B505_RX0_N | J2 |
| | J15 | B505_RX0_P | J2 |
|
|
XMOD JTAG
JTAG access to the TEBT080X is available through B2B connector JB2 using XMOD adapter TE0790.
| Scroll Title |
|---|
| anchor | Table_SIP_JTG |
|---|
| title | JTAG Pins Connection |
|---|
|
| Scroll Title |
|---|
| anchor | Table_SIP_Xmod_DIP |
|---|
| title | Xmod Adapter DIP-Switch Setting Description |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
| DIP Switch | ON | OFF | Default | Description |
|---|
| 1 | Normal mode | Adapter board CPLD update mode | ON | Update Mode JTAG access to SC CPLD only |
| 2 | Do not use (illegal setting) | Normal mode | OFF | Must be always in OFF state. |
| 3 | VIO connected to 3.3V | Power VIO from pin header J2 | OFF | User I/O Voltage |
| 4 | Power 3.3V from USB | Power 3.3V from pin header J2 | OFF | Power on-board peripherals (FTDI chip & SC CPLD, ...) |
JTAG Signal | B2B Connector | Notes |
|---|
| TMS | J2- 126 |
|
| TDI | J2- 122 |
|
| TDO | J2- 124 |
|
| TCK | J2- 120 |
|
The voltages 3.3V (VCC) and VIO (variable The voltages 3.3V (VCC) and VIO (variable SC CPLD I/O-voltage) on TE0790 can be configured by the DIP-switches 3 and 4:switch S2 which must be set as following.
| Scroll Title |
|---|
| anchor | Table_SIP_Xmod_DIP |
|---|
| title | Xmod Adapter DIP-Switch Setting Description |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
-3| DIP Switch-4 | 3.3V (VCC) Pin 5 | VIO Pin 6 | Description | | OFF | OFF | 3.3V from base (input**) | VIO from base (input**) | 3.3V (pin 5) and VIO (pin 6) sourced from base | | OFF | ON | 3.3V from USB* (output**) | VIO from base (input**) | VIO sourced from base by Pin 6 | | ON | OFF | 3.3V from base (input**) | 3.3V from base (input**) | VIO and 3.3V source by base (Pin 5 and Pin 6 are shorted and both must be sourced by 3.3V) | | ON | ON | 3.3V from USB* (output**) | 3.3V from USB* (output**) | 3.3V (pin 5) and VIO (pin 6) sourced USB (Pin 5 and Pin 6 are shorted and both are 3.3V) | |
PJTAG
PJTAG access to the TEBT0808 is available through B2B connector JM3.
...
| anchor | Table_SIP_JTG |
|---|
| title | PJTAG Pins Connection |
|---|
| ,S2 | Default | Description |
|---|
| 1 | ON | Update Mode JTAG access to SC CPLD only | | 2 | OFF | Must be always in OFF state. | | 3 | OFF | VIO is supplied from Module | | 4 | OFF | 3.3V is supplied by the carrier TEBT0808 |
|
PJTAG
PJTAG access to the TEBT0808 is available through B2B connector JB3
...
JTAG Signal
...
B2B Connector
...
I2C signals can be accessed through pin header J5.
| Scroll Title |
|---|
| anchor | Table_SIP_I2CJTG |
|---|
| title | I2C ConnectionsPJTAG Pins Connection |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Signals| Pin Header | Notes | PLL_SCL | J2- 90 | J5- 3 | PLL_SDA | J2- 92 | J5- 7 | |
...
| Notes |
|---|
| PJTAG_TMS | J3- 94 |
| | PJTAG_TDI | J3- 90 |
| | PJTAG_TDO | J3- 92 |
| | PJTAG_TCK | J3- 88 |
| | PJTAG_SRST | J2- 96 | Connected to SRST_B |
|
The I2C signals can be accessed through pin header J5.
| Scroll Title |
|---|
| anchor | Table_SIP_SMAI2C |
|---|
| title | SMA I2C Connections |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Designator | Notes | J6 | B230_TX3_P | J1-2 | J9 | B230_RX3_N | J1-5 | | Pin Header | Notes |
|---|
| PLL_SCL | J2- 90 | J5- 3 |
| | PLL_SDA | J2- 92 | J5- 7 |
J10 | B230_RX3_P | J1-3 | J11 | B230_TX3_N | J1-4 | J12 | B505_TX0_N | J2-67 | J13 | B505_TX0_P | J2-69 | J14 | B505_RX0_N | J2-70 | J15 | B505_RX0_P | J2-72
|
Test Points
| Scroll Title |
|---|
| anchor | Table_SIP_TestPoint |
|---|
| title | Test Points Information |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Test Point | Signals | B2B Connector | Notes |
|---|
| TP 1 | DDR_1V2 | J2-135 |
| | TP 2 | PG_PSGT | J2-82 |
| | TP 3 | ERR_STATUS | J2-86 |
| | TP 4 | PLL_FDEC | J2-94 |
| | TP 5 | EN_LPD | J2-108 |
| | TP 6 | EN_DDR | J2-112 |
| | TP 7 | PG_PL | J2-104 |
| | TP 8 | PG_PLL_1V8 | J2-80 |
| | TP 9 | N_PSGT | J2-84 |
| | TP 10 | ERR_OUT | J2-88 |
| | TP 11 | EN_FPD | J2-102 |
| | TP 12 | LP_GOOD | J2-106 |
| | TP 13 | PG_FPD | J2-110 |
| | TP 14 | PG_DDR | J2-114 |
| | TP 15 | EN_PLL_PWR | J2-77 |
| | TP 16 | PLL_FINC | J2-81 |
| | TP 17 | PG_GT_R | J2-91 |
| | TP 18 | EN_GT_R | J2-95 |
| | TP 19 | EN_PL | J2-101 |
| | TP 20 | EN_GT_L | J2-79 |
| | TP 21 | PLL_SEL0 | J2-93 |
| | TP 22 | PG_GT_L | J2-97 |
| | TP 23 | INIT_B | J2-98 |
| | TP 24 | IN1_P | J2-4 |
| | TP 25 | PLL_SEL1 | J2-87 |
| | TP 26 | PLL_LOLN | J2-85 |
| | TP 27 | PLL_RST | J2-89 |
| | TP 28 | DX_P | J2-119 |
| | TP 29 | DX_N | J2-121 |
| | TP 30 | IN1_N | J2-6 |
| | TP 31 | B505_CLK0_P | J2-10 |
| | TP 32 | B505_CLK0_N | J2-12 |
| | TP 33 | B505_CLK1_P | J2-16 |
| | TP 34 | B505_CLK1_N | J2-18 |
| | TP 35 | B128_CLK1_P | J2-22 |
| | TP 36 | B128_CLK1_N | J2-24 |
| | TP 37 | CLK0_N | J2-1 |
| | TP 38 | CLK0_P | J2-3 |
| | TP 39 | CLK8_P | J2-7 |
| | TP 40 | CLK8_N | J2-9 |
| | TP 41 | CLK7_P | J2-13 |
| | TP 42 | CLK7_N | J2-15 |
| | TP 43 | IN2_P | J3-66 |
| | TP 44 | IN2_N | J3-68 |
| | TP 45 | B230_CLK1_N | J3-59 |
| | TP 46 | B230_CLK1_P | J3-61 |
| | TP 47 | B229_CLK0_N | J3-65 |
| | TP 48 | B229_CLK0_P | J3-67 |
| | TP 49 | PLL_3V3 | J3-152 |
| | TP 50 | GND | J3-155 |
| | TP 51 | PL_1V8 | J1-121 |
| | TP 52 | PS_1V8 | J3-147 |
| | TP 53 | SI_PLL_1V8 | J3-151 |
| | TP 54 | PROG_B | J2-100 |
| | TP 55...56 | GND | - |
|
|
On-board Peripherals
...
| Scroll Title |
|---|
| anchor | Table_OBP |
|---|
| title | On Board Peripherals |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
DIP Switch
There are thre three DIP Switches, S1, S2, S3.
...
| Scroll Title |
|---|
| anchor | Table_OBP_DIP |
|---|
| title | DIP Switch S1 |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
S1 switchNotesS1AS1BS1C| S1D |
|
Control signals must be set using DIP Switch S2, S3.
| Scroll Title |
|---|
| anchor | Table_OBP_DIP |
|---|
| title | DIP Switch S2 |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| DIP Switch S2 | Signals | B2B | S2 switchNotesNotes |
|---|
| S2A | EN_PSGT | J2-84 | Position OFF enables power rail | | S2BS2A | EN_GT_R | J2-95 | Position OFF enables power rail | | S2CS2B | EN_GT_L | J2-97 | Position OFF enables power rail | | S2DS2C | EN_PLL_PWR | J2-77 | S2D | Position OFF enables power rail, connected to PG_PL |
|
| Scroll Title |
|---|
| anchor | Table_OBP_DIP |
|---|
| title | DIP Switch S3 |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| DIP Switch S3 | Signals | B2B | S3 switch | Notes |
|---|
| S3A | EN_DDR | J2-112 | S3A | Position OFF enables power rail | | S3B | EN_LPD | J2-108108 | S3B | Position OFF enables power rail | | S3CS3B | EN_PL | J2-101 | S3C | Position OFF enables power rail | | S3D | EN_FPD | J2-102 | S3D | Position OFF enables power rail |
|
LEDs
| Scroll Title |
|---|
| anchor | Table_OBP_LED |
|---|
| title | On-board LEDs |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Color | Connected to | Active Level | Note |
|---|
| D2 | Red | DONE |
Low| Active High | Non User LED | | D3 | Red | ERR_STATUS |
Low | Active High | Non User LED | | D4 | Red | ERR_OUT |
Low
|
Clock Sources
| Scroll Title |
|---|
| anchor | Table_OBP_CLK |
|---|
| title | Osillators |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Designator | Description | Frequency | Note |
|---|
| U2 | MEMS Oscillator | 125.00 MHz |
|
|
...
| Scroll Title |
|---|
| anchor | Table_PWR_PC |
|---|
| title | Power Consumption |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| 2,0mm MC LB2 | Note |
|---|
| J7 | 3.3V direct modules power supply | | J8 | GND |
|
...
Power Consumption
Current Minimum current depends manly mainly on design and cooling solution. Use Xilinx Power Estimator and/or Your Vivado Project to estimate min current. Minimum of 3A are recommanded for basic functionality.
| Scroll Title |
|---|
| anchor | Table_PWR_PC |
|---|
| title | Power Consumption |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Power Input Pin | Typical Current |
|---|
| VIN3.3V | TBD* |
|
* TBD - To Be Determined
Power Distribution Dependencies
...
| Scroll Only |
|---|
 Image Removed
|
...
Input oower sourced directly the module, Only one Diode D1 is used for protection.
...
| anchor | Figure_PWR_PD |
|---|
| title | Power Distribution |
|---|
inverse polarity protection.
| Scroll Title |
|---|
| anchor | TableFigure_PWR_PRPD |
|---|
| title | Module power rails.Power Distribution |
|---|
|
tablelayoutorientationportraitsortDirectionASCrepeatTableHeadersdefaultstyle| false | | diagramDisplayName | |
|---|
| lbox | true |
|---|
| revision | 4 |
|---|
| diagramName | TEBT0808_PWR_PD |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramWidth | 640 |
|---|
|
|
| Scroll Only |
|---|
Image Added |
|
Power Rails
| Scroll Title |
|---|
| anchor | Table_PWR_PR |
|---|
| title | Module power rails. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
Power Rail Name | B2B J1 Pins | B2B J2 Pins | B2B J3 Pins | Directions | Note |
|---|
| PL_DCIN | 151, 153, 155, 157, 159 | - | - | Output | - | | DCDCIN | - | 154, 156, 158, 160,
153, 155, 157, 159 | - | Output | - | | LP_DCDC | - | 138, 140, 142, 144 | - | Output | - | | PS_BATT | - | 125 | - | Output | - | | GT_DCDC | - | - | 157, 158, 159, 160 | Output | - | | PLL_3V3 | - | - | 152 | Output | - |
| widths |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
| Power Rail Name | B2B JM1 Pin | B2B JM2 Pin | B2B JM3 Pin | B2B JM4 Pin | Direction | Notes |
|---|
| 3.3V | 151,153,155,157,159 | 140,142,144,154,156,158,160,
153,155,157,159 | 157,158,159,160 | - | Output | Carrier power supply to module power rails PL_DCDCIN. DCDCIN, LP_DCDC, GT_DCDC, PL_3V3V |
VCCO_47 | - | - | 43, 44 | - | Output | Connected to 1.8 (SI_PLL_1V8) |
| VCCO_48 | - | - | 15,16 | - | Output | Connected to 1.8 (SI_PLL_1V8) |
| VCCO_64 | - | - | - | 58, 106 | Output | Connected to 1.8 (PL_1V8) |
| VCCO_65 | - | - | - | 69, 105 | Output | Connected to 1.8 (PL_1V8) |
| VCCO_66 | 90,120 | - | - | - | Output | Connected to 1.8 (PL_1V8) |
PS_1V8 | - | 99, | 147, 148 | - | Input | | PLL_3V3 | - | - | 152 | - | Output | 3.3V |
PL_1_V8 | 121,121 | - | - | - | Input | 1.8V for PL Banks-DDR 1V2 | 135-Inout | PL_3V3- | 152Output | Connected to 3.3V | PSBAT | - | 125 | -Output | 1.2V..1.5V, abs. max 2V
Board to Board Connectors
| Page properties |
|---|
|
- This section is optional and only for modules.
use "include page" macro and link to the general B2B connector page of the module series, For example: 6 x 6 SoM LSHM B2B Connectors
| Include Page |
|---|
| PD:6 x 6 SoM LSHM B2B ConnectorsPD: |
|---|
| 6 x 6 SoM LSHM B2B Connectors |
|---|
|
|
...
| Include Page |
|---|
| PD:5.2 x 7.6 SoM UltraSoM+ ST5 and SS5 B2B ConnectorsPD: |
|---|
| 5.2 x 7.6 SoM UltraSoM+ ST5 and SS5 B2B Connectors |
|---|
|
...
| Scroll Title |
|---|
| anchor | Table_TS_AMR |
|---|
| title | PS absolute maximum ratings |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Symbols | Min | Max | Unit | Note |
|---|
| VIN | -0.3 | 4 | V | Limit by DC1123, Note: VIN is connected directly to module, this is not considered here | | Storage Temperatur | -40 | +85 | °C | See DIP Switch, CHS-04TA datasheet |
|
Recommended Operating Conditions
...
| Scroll Title |
|---|
| anchor | Table_TS_ROC |
|---|
| title | Recommended operating conditions. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Symbols | Min | Max | Unit | Note |
|---|
| VIN | 3,14 | 3.47 | V |
Important, check | Check also TRM of the connected module | | Operating Temperatur | -40 | +85 | °C |
|
|
Physical Dimensions
Module size: 90 mm × 90 mm. Please download the assembly diagram for exact numbers.
Mating height with standard connectors: 3.5 mm.
...
| Scroll Title |
|---|
| anchor | Figure_TS_PD |
|---|
| title | Physical Dimension |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| |
|---|
| fitWindow | false |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| revision | 12 |
|---|
| diagramName | TEBT0808_PS_PD |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramWidth | 641 |
|---|
|
|
| Scroll Only |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
| 
|
|
...
| Scroll Title |
|---|
| anchor | Table_VCP_SO |
|---|
| title | Trenz Electronic Shop Overview |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
Revision History
Hardware Revision History
| Scroll Title |
|---|
| anchor | Table_RH_HRH |
|---|
| title | Hardware Revision HistoryTrenz Electronic Shop Overview |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | widths |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
|
| Trenz shop TEBT0808 overview page |
|---|
| English page | German page |
Revision History
Hardware Revision History
| |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Date | Revision | Changes | Documentation Link |
|---|
| 2016-05-30 | 01 | Initial Release | REV01 |
|
Hardware revision number can be found on the PCB board together with the module model number separated by the dash.
| Scroll Title |
|---|
| anchor | Figure_RV_HRN |
|---|
| title | Board hardware revision number. |
|---|
|
| Scroll Ignore |
|---|
| draw.io Diagram |
|---|
| border | false |
|---|
| viewerToolbar | true |
|---|
| |
|---|
| fitWindow | false |
|---|
| diagramDisplayName | |
|---|
| lbox | true |
|---|
| revision | 1 |
|---|
| diagramName | TEBT0808_RV_HRN |
|---|
| simpleViewer | false |
|---|
| width | |
|---|
| links | auto |
|---|
| tbstyle | hidden |
|---|
| diagramWidth | 158 |
|---|
|
|
| Scroll Only |
|---|
| scroll-pdf | true |
|---|
| scroll-office | true |
|---|
| scroll-chm | true |
|---|
| scroll-docbook | true |
|---|
| scroll-eclipsehelp | true |
|---|
| scroll-epub | true |
|---|
| scroll-html | true |
|---|
|  Image Added
|
|
| Scroll Title |
|---|
| anchor | Table_RH_HRH |
|---|
| title | Hardware Revision History |
|---|
|
| Scroll Table Layout |
|---|
|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
style | widths | | sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
| Date | Revision | Changes |
|---|
2016-ß6-29 | 01 | -
Document Change History
| Page properties |
|---|
|
- Note this list must be only updated, if the document is online on public doc!
- It's semi automatically, so do following
Add new row below first Copy "Page Information Macro(date)" Macro-Preview, Metadata Version number, Author Name and description to the empty row. Important Revision number must be the same as the Wiki document revision number Update Metadata = "Page Information Macro (current-version)" Preview+1 and add Author and change description. --> this point is will be deleted on newer pdf export template - Metadata is only used of compatibility of older exports
|
...
| Scroll Title |
|---|
| anchor | Table_RH_DCH |
|---|
| title | Document change history. |
|---|
|
| Scroll Table Layout |
|---|
| orientation | portrait |
|---|
| sortDirection | ASC |
|---|
| repeatTableHeaders | default |
|---|
| style | |
|---|
| widths | |
|---|
| sortByColumn | 1 |
|---|
| sortEnabled | false |
|---|
| cellHighlighting | true |
|---|
|
| Date | Revision | Contributor | Description |
|---|
| Page info |
|---|
| infoType | Modified date |
|---|
| dateFormat | yyyy-MM-dd |
|---|
| type | Flat |
|---|
|
| | Page info |
|---|
| infoType | Current version |
|---|
| prefix | v. |
|---|
| type | Flat |
|---|
| showVersions | false |
|---|
|
| | Page info |
|---|
| infoType | Modified by |
|---|
| type | Flat |
|---|
| showVersions | false |
|---|
|
change list | | | 2020-05-11 | v.54 | John Hartfiel | add notes to DIP section - Correction on configuration signal section
| | 2020-01-24 | v.49 | Pedram Babakhani | | -- | all | Edit | Page info |
|---|
| infoType | Modified users |
|---|
| type | Flat |
|---|
| showVersions | false |
|---|
|
| |
|
Disclaimer
| Include Page |
|---|
| IN:Legal Notices |
|---|
| IN:Legal Notices |
|---|
|
...