Versions Compared

Old Version 41

changes.mady.by.user Pedram Babakhani

Saved on

compared with

New Version Current

changes.mady.by.user Vadim Yunitski

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The Trenz Electronic TEBT0808 is a test fixture for module TE0808(REV01REV02, REV02REV03) and TE0803(REV01) series.

...

Page properties
hiddentrue
idComments

Note:
Use 'Key Features' description in shoping page, for example: https://shop.trenz-electronic.de/de/TE0728-04-1Q-SoC-Micromodul-mit-Xilinx-Automotive-Zynq-7020-512-MByte-DDR3L-6-x-6-cm

  • Modules
    • TE0808, TE0803,...
  • On Board
    • Done/Error/Status LEDs
    • MEMS Oscillator 125.0 00 MHz
    • Boot Mode DIP-Switch
    • 2x DIP-Switches to control TE080x power domains
  • Interface
    • Pin Header for TE0790 JTAG/UART Adapter
    • ARM JTAG header
    • 10 Pin Header for I2C
    • Board to Board (B2B) Connectors
    • One PL GT with 4x SMA Connectors
    • One PS GT with 4x SMA Connectors
    • One pre-assembled TE0790 XMOD FTDI JTAG adapter
  • Power:
    • 3.3 V (Nominal supply voltageSupply Voltage)
  • Dimension: 90mm x 90mm

Block Diagram

Page properties
hiddentrue
idComments

add drawIO object here.

Note

For more information regarding how to draw a diagram, Please refer to "Diagram Drawing Guidline" .


...

Scroll Title
anchorFigure_OV_BD
titleTEBT0808 Block Diagram


Scroll Ignore
draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision1823
diagramNameTEBT0808_OV_BD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth640636



Scroll Only

Image Modified


Main Components

...

Scroll Title
anchorFigure_OV_BD
titleTEBT0808 Main Components


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision4
diagramNameTEBT0808_OV_MC
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth640


Scroll Only

Image Modified


  1. Uninsulated Power Jack. J7-J8
  2. SMA Coaxial straight. J6- J9...15
  3. Surface Mount Schottky Barrier Rectifier. D1
  4. ARM PJTAG Pin Header J16
  5. I2C Pin Header, J5
  6. Board to Board Connectors. J1...4
  7. MEMS Oscillator, U2
  8. On-Board LEDs, D2...4
  9. DIP-Switch, S1...3
  10. XMOD JTAG Baseheader, JX1

Initial Delivery State

...

Scroll Title
anchorTable_OV_BP
titleBoot Process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

ON
M3M2M1M0Bootmode HexBootmodeNotes
ONONONON0xF0b0000PS Main JTAG (TE0790 USB JTAG)DIPs are inverted
ONONOFFON0xD0b0010SPI Flash (dual parallel, 4bit x 2, 32bit Addressing)DIPs are inverted
OFFOFFONONOFFON0x80b1000PJTAG(MIO29:26)DIPs are inverted



Scroll Title
anchorTable_OV_RST
titleReset Process.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signal

B2BNote

PLL_RST

J2-89
SRST_BJ2-96Connected to PJTAG0_SRST - J16


...

Board to Board (B2B) I/Os

FPGA bank number and number TEBT0808 has four B2B Connectors and each connector has 160 pins. Number of I/O signals and Interfaces connected to the B2B connectorconnectors is as following table:

Scroll Title
anchorTable_SIP_B2B
titleGeneral PL I/O to B2B connectors information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

B2B ConnectorInterfacesNumber of I/ONotes
J1

User I/O

22 46 Single Ended, 11 23 Differential

8 16 Single Ended, 4 8 Differential8

16 Single Ended, 4 8 Differential8

16 Single Ended, 4 8 Differential

3 4 Single Ended

IOs are Loop-Back

IOs are Loop-Back

IOs are Loop-Back

IOs are Loop-Back

Connected to Module FPGA, Bank 66

Connected to Module FPGA, Bank 228

Connected to Module FPGA, Bank 229

Connected to Module FPGA, Bank 230

VCCO_66, PL_1V8

J2

User IO

32 28 Single Ended, 16 14 Differential

4 6 Single Ended, 16 3 Differential

Connected to  Module FPGA, Bank 505

Connected to Module FPGA, Bank 128

IOs are Loop-Back

IOs are Loop-Back

Boot Mode 4 Single EndedMODE0...3
Control Signals15 25 Single Ended

PLL_SEL0, PLL_SEL1, PLL_RST, EN_GTR, EN_PL, PLL_LOLN, EN_PSGT, ERR_STATUS, ERR_OUT,SRST_B, INIT_B, PROG_B, EN_FPD , EN_LPD , DONE

Power Control Signal10 Single Ended

, EN_PLL_PWR, PLL_FINC ,PG_PLL_1V8, LP_GOOD, PG_DDR, PG_PL, PG_FPD, PG_PSGT, PG_GT_R, PG_GT_L

JTAG Interface7 Single EndedTCK, TDI, TMS, TDO, MR, Rxd, Txd
WANNE2I2C 2 Single EndedPLL_SCL, PLL_SDA
Clock

6 Single Ended, 3 Differential

CLK0, CLK7, CLK8

J3



User I/OIO

12 24 Single Ended, 6 12 Differential

12 24 Single Ended, 6 12 Differential

Connected to Module FPGA, Bank 48

Connected to Module FPGA, Bank 47

Clock6 Single Ended, 3 DifferentialCLK228, CLK229, CLK230
PJTAG Interface7 4 Single EndedPJTAG0_TCK, PJTAG0_TDI, PJTAG0_TMS, PJTAG0_TDO,
MIO27 45 Single EndedMIO19MIO13..7677
UART2 Single EndedTXD, RXD
Power pinsControl Signals4 Single EndedPS_1V8, SI_PLL_1V8, VCCO_48, VCCO_47, PLL_3V3
J4User I/O

48 Single Ended, 62 24 Differential

4 48 Single Ended, 24 Differential

4 Single Ended

4 Single Ended

IOs are Loop-Back

IOs are Loop-Back

B64_T0...3

B65_T0...3

Connected to Module FPGA, Bank 64

Connected to Module FPGA, Bank 64

Power pins4 Single EndedVCCO_64, VCCO65

...


SMA Coaxial Connectors

TEBT0808 is equipped with 8 SMD Coaxial Connectors. JTAG access to the TEBT080X  is available through B2B connector JB2 using XMOD JTAG adapter TE0790 adapter.

Scroll Title
anchorTable_SIP_JTGSMDCoax
titleJTAG Pins ConnectionSMD Coaxial Connectors

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal
Designator SchematicB2B ConnectorNotes
TMSJ2- 126TDIJ2- 122TDOJ2- 124TCKJ2- 120

There is a DIP switch, S2, on TE0790 adapter which must be set accordingly.

J6B230_TX3_PJ1
J9B230_RX3_NJ1
J10B230_RX3_PJ1
J11B230_TX3_PJ1
J12B505_TX0_NJ2
J13B5050TX0_PJ2
J14B505_RX0_NJ2
J15B505_RX0_PJ2


XMOD JTAG

JTAG access to the TEBT080X  is available through B2B connector JB2 using XMOD adapter TE0790.

Scroll Title
anchorTable_SIP_JTG
titleJTAG Pins Connection
Scroll Title
anchorTable_SIP_Xmod_DIP
title Xmod Adapter DIP-Switch Setting Description

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP SwitchONOFFDefaultDescription
1Normal modeAdapter board CPLD update modeONUpdate Mode JTAG access to SC CPLD only
2Do not use (illegal setting)Normal modeOFFMust be always in OFF state.
3VIO connected to 3.3VPower VIO from pin header J2OFFUser I/O Voltage
4Power 3.3V from USBPower 3.3V from pin header J2OFFPower on-board peripherals (FTDI chip & SC CPLD, ...)

The voltages 3.3V (VCC) and VIO (variable SC CPLD I/O-voltage) can be configured by the DIP-switch S2-3 and S2-4 on TE0790:

...

anchorTable_SIP_Xmod_DIP
title Xmod Adapter DIP-Switch Setting Description

...

3.3V (pin 5) and VIO (pin 6) sourced USB (Pin 5 and Pin 6 are shorted and both are 3.3V)

JTAG Signal

B2B Connector

Notes
TMSJ2- 126
TDIJ2- 122
TDOJ2- 124
TCKJ2- 120


The voltages 3.3V (VCC) and VIO (variable SC CPLD I/O-voltage) on TE0790 can be configured by the DIP-switch S2 which must be set as following. 

PJTAG

PJTAG access to the TEBT0808  is available through B2B connector JB3.

Scroll Title
anchorTable_SIP_JTGXmod_DIP
titlePJTAG Pins Connection Xmod Adapter DIP-Switch Setting Description

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

JTAG Signal

B2B Connector

Notes
TMSJ3- 94TDIJ3- 90TDOJ3- 92TCKJ3- 88
SRSTJ2- 96Connected to SRST_B

I2C Pin header

DIP Switch,S2DefaultDescription
1ONUpdate Mode JTAG access to SC CPLD only
2OFFMust be always in OFF state.
3OFFVIO is supplied from Module
4OFF3.3V is supplied by the carrier TEBT0808


PJTAG

PJTAG access to the TEBT0808  is available through B2B connector JB3I2C signals can be accessed through pin header J5.

Scroll Title
anchorTable_SIP_I2CJTG
titleI2C ConnectionsPJTAG Pins Connection

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signals

JTAG Signal

B2B Connector

Pin Header NotesPLL_SCLJ2- 90J5- 3PLL_SDAJ2- 92J5- 7

SMA Coaxial

Notes
PJTAG_TMSJ3- 94
PJTAG_TDIJ3- 90
PJTAG_TDOJ3- 92
PJTAG_TCKJ3- 88
PJTAG_SRSTJ2- 96Connected to SRST_B


Pin header

The I2C signals can be accessed through pin header J5.

J2-72
Scroll Title
anchorTable_SIP_SMAI2C
titleSMA I2C Connections

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefaultstylewidths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue
default
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Signals

B2B Connector

Pin HeaderNotes
PLL_SCLJ2- 90J5- 3
PLL_SDAJ2- 92J5- 7

Designator

Signals

B2B Connector

Notes
J6B230_TX3_PJ1-2J9B230_RX3_NJ1-5J10B230_RX3_PJ1-3J11B230_TX3_NJ1-4J12B505_TX0_NJ2-67J13B505_TX0_PJ2-69J14B505_RX0_NJ2-70J15B505_RX0_P


Test Points

Scroll Title
anchorTable_SIP_TestPoint
titleTest Points Information

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Test Point

Signals

B2B Connector

Notes
TP 1DDR_1V2J2-135
TP 2PG_PSGTJ2-82
TP 3ERR_STATUSJ2-86
TP 4PLL_FDECJ2-94
TP 5EN_LPDJ2-108
TP 6EN_DDRJ2-112
TP 7PG_PLJ2-104
TP 8PG_PLL_1V8J2-80
TP 9N_PSGTJ2-84
TP 10ERR_OUTJ2-88
TP 11EN_FPDJ2-102
TP 12LP_GOODJ2-106
TP 13PG_FPDJ2-110
TP 14PG_DDRJ2-114
TP 15EN_PLL_PWRJ2-77
TP 16PLL_FINCJ2-81
TP 17PG_GT_RJ2-91
TP 18EN_GT_RJ2-95
TP 19EN_PLJ2-101
TP 20EN_GT_LJ2-79
TP 21PLL_SEL0J2-93
TP 22PG_GT_LJ2-97
TP 23INIT_BJ2-98
TP 24IN1_PJ2-4
TP 25PLL_SEL1J2-87
TP 26PLL_LOLNJ2-85
TP 27PLL_RSTJ2-89
TP 28DX_PJ2-119
TP 29DX_NJ2-121
TP 30IN1_NJ2-6
TP 31B505_CLK0_PJ2-10
TP 32B505_CLK0_NJ2-12
TP 33B505_CLK1_PJ2-16
TP 34B505_CLK1_NJ2-18
TP 35B128_CLK1_PJ2-22
TP 36B128_CLK1_NJ2-24
TP 37CLK0_NJ2-1
TP 38CLK0_PJ2-3
TP 39CLK8_PJ2-7
TP 40CLK8_NJ2-9
TP 41CLK7_PJ2-13
TP 42CLK7_NJ2-15
TP 43IN2_PJ3-66
TP 44IN2_NJ3-68
TP 45B230_CLK1_NJ3-59
TP 46B230_CLK1_PJ3-61
TP 47B229_CLK0_NJ3-65
TP 48B229_CLK0_PJ3-67
TP 49PLL_3V3J3-152
TP 50GNDJ3-155
TP 51PL_1V8J1-121
TP 52PS_1V8J3-147
TP 53SI_PLL_1V8J3-151
TP 54PROG_BJ2-100
TP 55...56GND-


...

Scroll Title
anchorTable_OBP
titleOn Board Peripherals

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Chip/InterfaceDesignatorNotes
DIP SwitchS1...3
LEDsD2...4Red LEDs
OscillatorU2125.00 MHz


DIP Switch

There are thre three DIP Switches, S1, S2, S3.

...

Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S1

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP Switch S1Signals

B2B

S1 switch
Notes
Notes
S1AMODE0J2-109
S1A

S1BMODE1J2-107
S1B

S1CMODE2J2-105
S1C

S1DMODE3J2-103
S1D


Control signals must be set using DIP Switch S2, S3.

Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S2

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP Switch S2SignalsB2BS2 switchNotesNotes
S2AEN_PSGTJ2-84Position OFF enables power rail
S2BS2AEN_GT_RJ2-95Position OFF enables power rail
S2CS2BEN_GT_LJ2-97Position OFF enables power rail
S2DS2CEN_PLL_PWRJ2-77S2DPosition OFF enables power rail, connected to PG_PL



Scroll Title
anchorTable_OBP_DIP
titleDIP Switch S3

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DIP Switch S3SignalsB2BS3 switchNotes
S3AEN_DDRJ2-112S3APosition OFF enables power rail
S3BEN_LPDJ2-108108S3BPosition OFF enables power rail
S3CS3BEN_PLJ2-101S3CPosition OFF enables power rail
S3DEN_FPDJ2-102S3DPosition OFF enables power rail


LEDs

Scroll Title
anchorTable_OBP_LED
titleOn-board LEDs

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DesignatorColorConnected toActive LevelNote
D2RedDONEActive HighNon User LED
D3RedERR_STATUSActive HighNon User LED
D4RedERR_OUTActive HighNon User LED


...

Scroll Title
anchorTable_PWR_PC
titlePower Consumption

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

Power Input PinTypical Current
VIN3.3VTBD*


* TBD - To Be Determined

...

Input oower sourced directly the module, Only one Diode D1 is used for inverse polarity protection.

Scroll Title
anchorFigure_PWR_PD
titlePower Distribution


Scroll Ignore

draw.io Diagram
borderfalse
viewerToolbartrue
fitWindowfalse
diagramDisplayName
lboxtrue
revision4
diagramNameTEBT0808_PWR_PD
simpleViewerfalse
width
linksauto
tbstylehidden
diagramWidth640


Scroll Only


...

Page properties
hiddentrue
idComments
  • This section is optional and only for modules.

  • use "include page" macro and link to the general B2B connector page of the module series,

    For example: 6 x 6 SoM LSHM B2B Connectors

    Include Page
    PD:6 x 6 SoM LSHM B2B ConnectorsPD:
    6 x 6 SoM LSHM B2B Connectors

Include Page
PD:5.2 x 7.6 SoM UltraSoM+ ST5 and SS5 B2B ConnectorsPD:
5.2 x 7.6 SoM UltraSoM+ ST5 and SS5 B2B Connectors

...

Scroll Title
anchorTable_RH_DCH
titleDocument change history.

Scroll Table Layout
orientationportrait
sortDirectionASC
repeatTableHeadersdefault
style
widths
sortByColumn1
sortEnabledfalse
cellHighlightingtrue

DateRevisionContributorDescription

Page info
infoTypeModified date
dateFormatyyyy-MM-dd
typeFlat

Page info
infoTypeCurrent version
prefixv.
typeFlat
showVersionsfalse

Page info
infoTypeModified by
typeFlat
showVersionsfalse

  • Updated block diagram
2020-05-11v.54John Hartfiel

  • add notes to DIP section

  • Correction on configuration signal section
2020-01-24v.49Pedram Babakhani
  • Initial Release

--

all

Edit

Page info
infoTypeModified users
typeFlat
showVersionsfalse

  • --


Disclaimer

Include Page
IN:Legal Notices
IN:Legal Notices

...