Page History

...

• Industrial-grade Xilinx Kintex-7 FPGA module (70T*, 160T*, 325T, 410T)
  * Devices supported by the free Xilinx Vivado WebPACK software.
• 256-Mbit (32-MByte) Quad SPI Flash memory (for configuration and operation) accessible through:
  • FPGA
  • JTAG port (SPI indirect (Bus width x4))
• 8 GTX transceivers
• FPGA configuration through:
  • JTAG (B2B connector)
  • SPI Flash memory
• 25 MHz low jitter oscillator with shutdown control
• Programmable quad PLL clock generator
• On-board high-efficiency DC-DC converters
  • GTX voltage regulators with control enable
  • Core voltage regulator: 20A (2 x Enpirion DC-DC regulators with load-sharing)
  • Supply voltages: either 3.3V or 3.3V and 5V
• Plug-on module with two 100-pin and one 60-pin high-speed hermaphroditic stacking strips
• Up to 144 (94 for 70T) FPGA I/O pins are available on B2B strips (up to 65 LVDS pairs possible)
• 2 user LED's, 1x DONE FPGA pin LED, 1 System Controller status LED
• System management and power sequencing
• AES bit-stream encryption
• eFUSE bit-stream encryption
• Evenly spread supply pins for good signal integrity
• Assembly options for cost or performance optimization available on request

Additional assembly options are available for cost or performance optimization upon request.

...