Versions Compared

Old Version 12

changes.mady.by.user John Hartfiel

Saved on

compared with

New Version 13

changes.mady.by.user John Hartfiel

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Name / opt. VHD NameDirectionPinDescriptionSchematic Sheet
3V3SB B16CPLD Programm Pin connected with pullupSC1
3V3SB B20CPLD initn Pin connected with pullupSC1
3V3SB C29CPLD Done Pin connected with pullupSC1
A_LA06_SC_N C22 / currently_not_usedSC2
A_LA06_SC_P B22 / currently_not_usedSC2
A_LA07_SC_N F20 / currently_not_usedSC2
A_LA07_SC_P E22 / currently_not_usedSC2
A_LA08_SC_N E21 / currently_not_usedSC2
A_LA08_SC_P D22 / currently_not_usedSC2
A_LA09_SC_N G22 / currently_not_usedSC2
A_LA09_SC_P G21 / currently_not_usedSC2
A_LA10_SC_N G17 / currently_not_usedSC2
A_LA10_SC_P H16 / currently_not_usedSC2
A_LA11_SC_N K22 / currently_not_usedSC2
A_LA11_SC_P K21 / currently_not_usedSC2
A_LA12_SC_N H20 / currently_not_usedSC2
A_LA12_SC_P H21 / currently_not_usedSC2
A_LA13_SC_N L22 / currently_not_usedSC2
A_LA13_SC_P L21 / currently_not_usedSC2
A_LA14_SC_N G16 / currently_not_usedSC2
A_LA14_SC_P F18 / currently_not_usedSC2
A_LA15_SC_N D19 / currently_not_usedSC2
A_LA15_SC_P C21 / currently_not_usedSC2
A_LA16_SC_N M21 / currently_not_usedSC2
A_LA16_SC_P M22 / currently_not_usedSC2
A_LA17_SC_N N21 / currently_not_usedSC2
A_LA17_SC_P N22 / currently_not_usedSC2
A_LA18_SC_N G19 / currently_not_usedSC2
A_LA18_SC_P F19 / currently_not_usedSC2
A_LA19_SC_N E19 / currently_not_usedSC2
A_LA19_SC_P D20 / currently_not_usedSC2
A_LA20_SC_N E20 / currently_not_usedSC2
A_LA20_SC_P D21 / currently_not_usedSC2
A_LA21_SC_N J17 / currently_not_usedSC2
A_LA21_SC_P J16 / currently_not_usedSC2
A_LA22_SC_N J19 / currently_not_usedSC2
A_LA22_SC_P J18 / currently_not_usedSC2
A_LA23_SC_N G18 / currently_not_usedSC2
A_LA23_SC_P H17 / currently_not_usedSC2
A_LA24_SC_N R22 / currently_not_usedSC2
A_LA24_SC_P P20 / currently_not_usedSC2
A_LA25_SC_N K16 / currently_not_usedSC2
A_LA25_SC_P K17 / currently_not_usedSC2
A_LA26_SC_N K18 / currently_not_usedSC2
A_LA26_SC_P L20 / currently_not_usedSC2
A_LA27_SC_N K20 / currently_not_usedSC2
A_LA27_SC_P J21 / currently_not_usedSC2
A_LA28_SC_N U22 / currently_not_usedSC2
A_LA28_SC_P T20 / currently_not_usedSC2
A_LA29_SC_N T22 / currently_not_usedSC2
A_LA29_SC_P T21 / currently_not_usedSC2
A_LA30_SC_N W22 / currently_not_usedSC2
A_LA30_SC_P V21 / currently_not_usedSC2
A_LA31_SC_N V22 / currently_not_usedSC2
A_LA31_SC_P U20 / currently_not_usedSC2
A_LA32_SC_N Y20 / currently_not_usedSC2
A_LA32_SC_P Y21 / currently_not_usedSC2
A_LA33_SC_N AA22 / currently_not_usedSC2
A_LA33_SC_P Y22 / currently_not_usedSC2
B64_T1 D3 / currently_not_usedSC2
B64_T2 C3 / currently_not_usedSC2
B64_T3 B1 / currently_not_usedSC2
B65_T1 C2 / currently_not_usedSC2
B65_T2 E4 / currently_not_usedSC2
B65_T3 C1 / currently_not_usedSC2
B66_T1 D1 / currently_not_usedSC2
B66_T2 F4 / currently_not_usedSC2
B66_T3 F3 / currently_not_usedSC2
B67_T1 F1 / currently_not_usedSC2
B67_T2 G3 / currently_not_usedSC2
B67_T3 H4 / currently_not_usedSC2
C_TCK A8 / currently_not_usedSC1
C_TDI C7 / currently_not_usedSC1
C_TDO A6 / currently_not_usedSC1
C_TMS C9 / currently_not_usedSC1
CAN_FAULT D15 / currently_not_usedSC1
CAN_RX B15 / currently_not_usedSC1
CAN_S C15 / currently_not_usedSC1
CAN_TX C16 / currently_not_usedSC1
CLK_SCinAA9external User CLK 25MHz (oscillator is assembly option)SC1
DDR_ENoutC6Power 7ASC1
DDR_PGinB8Power 7A SC1
DONEinG4PS Config SC2
DP_AUX_DE AB13 / currently_not_usedSC1
DP_AUX_RX AB12 / currently_not_usedSC1
DP_AUX_TX AA14 / currently_not_usedSC1
DP_ENoutM4Power 8SC2
DP_TX_HPD AA15 / currently_not_usedSC1
EN_12VoutC10Power 1 SC1
EN_3.3V / EN_3P3VoutY8Power 2 SC1
EN_A_3V3outY18Power 8 FMCSC1
EN_AF_1V8outW19Power 8 FMCSC1
EN_B_3V3outG11Power 8 FMC SC1
EN_BC_1V8outA3Power 8 FMCSC1
EN_C_3V3outE11Power 8 FMCSC1
EN_D_3V3outF8Power 8 FMCSC1
EN_DE_1V8outC5Power 8 FMCSC1
EN_E_3V3outE8Power 8 FMCSC1
EN_F_3V3outY10Power 8 FMC SC1
EN_GT_LoutA7Power 4B,CSC1
EN_GT_RoutB7Power 4B,CSC1
EN_SFP_SSDoutW8Power 8SC1
EN_VCCINToutB9Power 1 SC1
ERR_OUTinH1PS Config SC2
ERR_STATUSinJ2PS Config  SC2
ETH_RST L6 / currently_not_usedSC2
F_LA06_SC_N M19 / currently_not_usedSC2
F_LA06_SC_P M18 / currently_not_usedSC2
F_LA07_SC_N P21 / currently_not_usedSC2
F_LA07_SC_P N20 / currently_not_usedSC2
F_LA08_SC_N N18 / currently_not_usedSC2
F_LA08_SC_P M20 / currently_not_usedSC2
F_LA09_SC_N R18 / currently_not_usedSC2
F_LA09_SC_P R19 / currently_not_usedSC2
F_LA10_SC_N R20 / currently_not_usedSC2
F_LA10_SC_P R21 / currently_not_usedSC2
F_LA11_SC_N U19 / currently_not_usedSC2
F_LA11_SC_P T19 / currently_not_usedSC2
F_LA12_SC_N P18 / currently_not_usedSC2
F_LA12_SC_P P19 / currently_not_usedSC2
F_LA13_SC_N U17 / currently_not_usedSC2
F_LA13_SC_P U18 / currently_not_usedSC2
F_LA14_SC_N R17 / currently_not_usedSC2
F_LA14_SC_P T18 / currently_not_usedSC2
F_LA15_SC_N R16 / currently_not_usedSC2
F_LA15_SC_P T17 / currently_not_usedSC2
F_LA16_SC_N V19 / currently_not_usedSC2
F_LA16_SC_P W20 / currently_not_usedSC2
F_LA17_SC_N N16 / currently_not_usedSC2
F_LA17_SC_P N17 / currently_not_usedSC2
F_LA18_SC_N L16 / currently_not_usedSC2
F_LA18_SC_P L17 / currently_not_usedSC2
F_LA19_SC_N M16 / currently_not_usedSC2
F_LA19_SC_P M17 / currently_not_usedSC2
F_LA20_SC_N N6 / currently_not_usedSC2
F_LA20_SC_P N7 / currently_not_usedSC2
F_LA21_SC_N T6 / currently_not_usedSC2
F_LA21_SC_P R7 / currently_not_usedSC2
F_LA22_SC_N T5 / currently_not_usedSC2
F_LA22_SC_P R6 / currently_not_usedSC2
F_LA23_SC_N P6 / currently_not_usedSC2
F_LA23_SC_P P7 / currently_not_usedSC2
F_LA24_SC_N W3 / currently_not_usedSC2
F_LA24_SC_P V4 / currently_not_usedSC2
F_LA25_SC_N Y2 / currently_not_usedSC2
F_LA25_SC_P W4 / currently_not_usedSC2
F_LA26_SC_N U4 / currently_not_usedSC2
F_LA26_SC_P T4 / currently_not_usedSC2
F_LA27_SC_N U5 / currently_not_usedSC2
F_LA27_SC_P T7 / currently_not_usedSC2
F_LA28_SC_N V2 / currently_not_usedSC2
F_LA28_SC_P W1 / currently_not_usedSC2
F_LA29_SC_N AA1 / currently_not_usedSC2
F_LA29_SC_P Y1 / currently_not_usedSC2
F_LA30_SC_N V1 / currently_not_usedSC2
F_LA30_SC_P U3 / currently_not_usedSC2
F_LA31_SC_N V3 / currently_not_usedSC2
F_LA31_SC_P W2 / currently_not_usedSC2
F_LA32_SC_N M3 / currently_not_usedSC2
F_LA32_SC_P N5 / currently_not_usedSC2
F_LA33_SC_N R2 / currently_not_usedSC2
F_LA33_SC_P R3 / currently_not_usedSC2
F1_ENoutC8FAN SC1
F1PWM E10FAN / currently_not_used SC1
F1SENSE D11FAN  / currently_not_usedSC1
F2_ENoutB4FANSC1
F2PWM D9FAN / currently_not_usedSC1
F2SENSE G12FAN / currently_not_usedSC1
F3_ENoutA12FANSC1
F3PWM B13FAN / currently_not_usedSC1
F3SENSE A13FAN / currently_not_usedSC1
FAN_A_ENoutY19FANSC1
FAN_B_ENoutA2FAN SC1
FAN_C_ENoutB3FANSC1
FAN_D_ENoutD7FANSC1
FAN_E_ENoutD6FANSC1
FAN_F_ENoutW18FANSC1
FMC12V_ENoutAA8Power 8 FMCSC1
FMCA_PG_C2MinoutE16Power 8 FMCSC1
FMCA_PG_M2CinF17Power 8 FMCSC1
FMCA_PRSNTinF16Power 8 FMCSC1
FMCA_TCK T16/ currently_not_usedSC1
FMCA_TDI U15/ currently_not_usedSC1
FMCA_TDO U16/ currently_not_usedSC1
FMCA_TMS V17 / currently_not_usedSC1
FMCAF_12V_PGinW9Power 8 FMCSC1
FMCB_PG_C2MinoutC4Power 8 FMCSC1
FMCB_PG_M2CinD5Power 8 FMCSC1
FMCB_PRSNTinD4Power 8 FMCSC1
FMCB_TCK E6 / currently_not_usedSC1
FMCB_TDI D8 / currently_not_usedSC1
FMCB_TDO E9 / currently_not_usedSC1
FMCB_TMS F10 / currently_not_usedSC1
FMCC_PG_C2MinoutU6Power 8 FMCSC1
FMCC_PG_M2CinV6Power 8 FMC SC1
FMCC_PRSNTinW5Power 8 FMCSC1
FMCC_TCK W6 / currently_not_usedSC1
FMCC_TDI Y4 / currently_not_usedSC1
FMCC_TDO Y5 / currently_not_usedSC1
FMCC_TMS AA3 / currently_not_usedSC1
FMCD_PG_C2MinoutG8Power 8 FMCSC1
FMCD_PG_M2CinG10Power 8 FMC SC1
FMCD_PRSNTinAA4Power 8 FMCSC1
FMCD_TCK T12 / currently_not_usedSC1
FMCD_TDI U8 / currently_not_usedSC1
FMCD_TDO V9 / currently_not_usedSC1
FMCD_TMS U10 / currently_not_usedSC1
FMCE_PG_C2MinoutAB3Power 8 FMC SC1
FMCE_PG_M2CinAB2Power 8 FMC SC1
FMCE_PRSNTinAB5Power 8 FMCSC1
FMCE_TCK Y6 / currently_not_usedSC1
FMCE_TDI AB6 / currently_not_usedSC1
FMCE_TDO AA7 / currently_not_usedSC1
FMCE_TMS AB7 / currently_not_usedSC1
FMCF_PG_C2MinoutAB20Power 8 FMC SC1
FMCF_PG_M2CinAB21Power 8 FMCSC1
FMCF_PRSNTinAA19Power 8 FMCSC1
FMCF_TCK W11 / currently_not_usedSC1
FMCF_TDI V11 / currently_not_usedSC1
FMCF_TDO AB10 / currently_not_usedSC1
FMCF_TMS AA10 / currently_not_usedSC1
I2C_RST L2 / currently_not_usedSC2
INIT_BinJ3PS ConfigSC2
JTAGENBinA16JTAG /  Enable to get access to CPLD over JTAG. Pin is not accessible on CPLD. Is set by DIP-Switch S3-2SC1
LED_1A Y12 / currently_not_usedSC1
LED_2A Y13 / currently_not_usedSC1
LED_2B Y14 / currently_not_usedSC1
LED1outU12USR (D13 green) SC1
LED2outV12USR (D14 green) SC1
LED3outW12USR (D15 green) SC1
LED4outV13USR (D16 red)SC1
MEM_SCL W16 / currently_not_usedSC1
MEM_SDA V16 / currently_not_usedSC1
MIO24 F5 / currently_not_usedSC2
MIO25 G5 / currently_not_usedSC2
MIO26 G15 / currently_not_usedSC1
MIO27 E12 / currently_not_usedSC1
MIO28 E15 / currently_not_usedSC1
MIO29 C11 / currently_not_usedSC1
MIO30 C13 / currently_not_usedSC1
MIO31 B12 / currently_not_usedSC1
MIO32 B11 / currently_not_usedSC1
MIO33 U7 / currently_not_usedSC1
MIO34 D12 / currently_not_usedSC1
MIO35 F15 / currently_not_usedSC1
MIO36 G7 / currently_not_usedSC1
MIO37 D14 / currently_not_usedSC1
MIO40 F12 / currently_not_usedSC1
MIO41 T8 / currently_not_usedSC1
MIO42outB14UART RXSC1
MIO43inE7UART TXSC1
MIO44 E14 / currently_not_usedSC1
MIO45 A20 / currently_not_usedSC1
MIO6 F6 / currently_not_usedSC2
MODE0outH3PS Config Boot Mode SC2
MODE1outH2PS Config Boot Mode SC2
MODE2outG2PS Config Boot Mode SC2
MODE3outG1PS Config  Boot Mode SC2
MRoutL7PS Config (PS_POR_B)  ResetSC2
NCoutAA20used as dummi output pin / Not connectedSC1
NC T15Not connectedSC1
NC W17Not connectedSC1
NC V15Not connectedSC1
NC W15Not connectedSC1
NC V14Not connectedSC1
NC W14Not connectedSC1
NC U13Not connectedSC1
NC T13Not connectedSC1
NC AB16Not connectedSC1
NC Y3Not connectedSC1
NC A21Not connectedSC1
NC G6Not connectedSC2
NC N1Not connectedSC2
NC N2Not connectedSC2
NC M1Not connectedSC2
NC N3Not connectedSC2
NC P2Not connectedSC2
NC M7Not connectedSC2
NC M6Not connectedSC2
NC P3Not connectedSC2
NC R1Not connectedSC2
NC M5Not connectedSC2
NC H5Not connectedSC2
NC J5Not connectedSC2
NC J4Not connectedSC2
NC K5Not connectedSC2
NC L3Not connectedSC2
PG_12VinA11Power 1 SC1
PG_FPDinA10Power 2SC1
PG_GT_LinK3Power 5BCSC2
PG_GT_RinF11Power 5BCSC1
PG_PSGTinA5Power 6A SC1
PHY_CLK125M K2 / currently_not_usedSC2
PHY_LED0 L5 / currently_not_usedSC2
PHY_LED1 L1 / currently_not_usedSC2
PHY_LED2 K1 / currently_not_usedSC2
PLL_RST L4 / currently_not_usedSC2
PROG_BoutE2 PS Config (opt. PL Reset)SC2
PSGT_ENoutB10Power 4ASC1
SC_SW1inE17USR S3-3 / Set Boot ModeSC1
SC_SW2inD16USR S3-4 / Set Boot Mode SC1
SD_CD T11 / currently_not_usedSC1
SD_ENoutU11Power 8SC1
SD_WP T10 / currently_not_usedSC1
SFP_LED1 AB17 / currently_not_usedSC1
SFP_LED2 AB18 / currently_not_usedSC1
SFP_LED3 AA16 / currently_not_usedSC1
SFP_LED4 AB15 / currently_not_usedSC1
SFP0_LOS V8 / currently_not_usedSC1
SFP0_TX_DIS Y7 / currently_not_usedSC1
SFP1_LOS W7 / currently_not_usedSC1
SFP1_TX_DIS V7 / currently_not_usedSC1
SI5345_CLK E1 / currently_not_usedSC2
SSD1_LED AA13 / currently_not_usedSC1
SSD1_PERSTN AA11 / currently_not_usedSC1
SSD1_SLEEP AA12 / currently_not_usedSC1
SSD1_WAKE AB11 / currently_not_usedSC1
U_SW1inD18USR (S4-1) / currently_not_usedSC1
U_SW2inD17USR (S4-2) / currently_not_usedSC1
U_SW3inC19USR (S4-3)/ currently_not_usedSC1
U_SW4inC18USR (S4-4) / currently_not_usedSC1
USB0_RST M2 / currently_not_usedSC2
USBH_MODE0 Y17 / currently_not_usedSC1
USBH_MODE1 Y16 / currently_not_usedSC1
USBH_RST Y15 / currently_not_usedSC1
USR_BUT1inF13USR (S1) Power Reset  SC1
USR_BUT2inG13USR (S2)  PS / Power Reset SC1
XMOD1_A B19XMOD J35 / currently_not_usedSC1
XMOD1_BoutA17XMOD J35 LED / Attention this is connected to XMOD1_E SC1
XMOD1_E C17XMOD J35 / Attention this is connected to XMOD1_B  / currently_not_usedSC1
XMOD1_GinA18XMOD  J35 Button  SC1
XMOD2_AoutK7UART RXD (XMOD J24) SC2
XMOD2_BinK6UART TX  (XMOD J24) SC2
XMOD2_EoutH7XMOD J24 LED / Boot ModeSC2
XMOD2_GinH6XMOD J24 Button / PS Reset SC2

 

Functional Description

...

Power is controlled by different state machines and can be restart over S1 S2 Button. Main Power sequence must be finished successfully before other power management units starts. Power Management can be checked over status LEDs, see LED section.

Main Power:

StateConditions for next stateDescription
1:IDLEPG_12V is ready

Start with this state on power up or Power Reset

  • EN12V is enabled, EN_VCCINT, EN_3P3V, DDR_EN are disabled
2:PER1_ENPG_FPD is ready
  • EN12V, EN_VCCINT, EN_3P3V are enabled, DDR_EN is is disabled
3:PER2_ENDDR_PG is ready
  • EN12V, EN_VCCINT, EN_3P3V DDR_EN are enabled 
4:RDYDDR_PG or PG_FPD or PG_12V failedNormal state if power sequence was ok.
5:ERROR---Only set, if a error occurs after successfully power up. Manually reset is needed.

MGT Power:

StateConditions for next stateDescription
1:IDLEMain Power sequence is done

Start with this state if main power is stared.

  • PSGT_EN, EN_GT_L, EN_GT_R are disabled
2:PER1_ENPG_PSGT, PG_GT_L, PG_GT_R are ready
  • SGT_EN, EN_GT_L, EN_GT_R are enabled
3:RDYPG_PSGT or  PG_GT_L or  PG_GT_R failedNormal state if power sequence was ok.
4:ERROR---Only set if a error occurs after successfully power up. Manually reset is needed.

Periphery Power:

StateConditions for next stateDescription
1:IDLEMain Power sequence is done

Start with this state if main power is stared.

  • DP_EN, EN_SFP_SSD, SD_EN are disabled
2:PER1_ENNo check possible, next state is RDY
  • DP_EN, EN_SFP_SSD, SD_EN are enabled
3:RDYNo check possibleNormal state if power sequence was ok.
4:ERROR---This state should never occurs.

FMC A and F Power:

StateConditions for next stateDescription
1:IDLEMain Power sequence is done

Start with this state if main power is stared.

  • FMC12V_EN, EN_AF_1V8, EN_A_3V3, EN_F_3V3, FMCF_PG_C2M, FMCA_PG_C2M are disabled
2:PER1_ENFMCAF_12V_PG, FMCF_PG_C2M, FMCA_PG_C2M are ready
  • FMC12V_EN, EN_AF_1V8, EN_A_3V3, EN_F_3V3, FMCF_PG_C2M, FMCA_PG_C2M are enabled
3:RDYFMCAF_12V_PG or FMCF_PG_C2M or FMCA_PG_C2M failedNormal state if power sequence was ok.
4:ERROR---Only set if a error occurs after successfully power up. Manually reset is needed.

* FMCF_PG_C2M, FMCA_PG_C2M are bidirectional.  External Pull up is used to check power fails.

FMC B,C,D,E Power:

StateConditions for next stateDescription
1:IDLEMain Power sequence is done

Start with this state if main power is stared.

  • EN_BC_1V8, EN_DE_1V8, EN_B_3V3, EN_C_3V3, EN_D_3V3, EN_E_3V3, FMCB_PG_C2M, FMCC_PG_C2M, FMCD_PG_C2M, FMCE_PG_C2M are disabled
2:PER1_ENFMCB_PG_C2M, FMCC_PG_C2M, FMCD_PG_C2M, FMCE_PG_C2M are ready

  • EN_BC_1V8, EN_DE_1V8, EN_B_3V3, EN_C_3V3, EN_D_3V3, EN_E_3V3, FMCB_PG_C2M, FMCC_PG_C2M, FMCD_PG_C2M, FMCE_PG_C2M are enabled

3:RDYFMCB_PG_C2M or FMCC_PG_C2M or FMCD_PG_C2M or FMCE_PG_C2M failedNormal state if power sequence was ok.
4:ERROR---Only set if a error occurs after successfully power up. Manually reset is needed.

FMCF_PB_C2M, FMCC_PG_C2M, FMCD_PG_C2M, FMCE_PG_C2M are bidirectional.  External Pull up is used to check power fails. 12V is sourced  and controlled by main power.

 

Reset

ButtonDescription
S1
S2Main Power Reset Button. Restart power management.
S2
FPGA XMODPS MR  Reset Button. Restart PS (PS_POR_B)
  • Buttons are debounced.

 

Boot Mode

S3-3 (SC_SW1)S3-4 (SC_SW2)Description
OFFOFFSD1 Boot Mode (SD-Card on J11)
OFFONPJTAG0
ONOFFQSPI32
ONONJTAG

 

USB

TODO

SD

TODO

FAN

 

FMC

-FMC JTAG TODO

...

UART is connected to FPGA XMOOD on J24. XMOD UART RXD output is connected to MIO42. MIO43 is connected to XMOD UART TX input.

USR Buttons and Switches

Todo

LED

LEDDescription
LED4 (D16 red
)
)

User FPGA IO 

LED3 (D15 green)User FPGA IO
LED2 (D14 green)

PS Status

Power LED

. Status depends on blink sequence and priority.

  • LED ON  : Power button is pressed
    1. ********    :
    Main power up failed
    1. Reset button is pressed
    2. *****ooo   :
    Main power error after successfully startup
    1. Init_B failed
    2. ****
    *ooo   : MGT or Periphery power up
    1. oooo   : PS_Error_Status and PS_Error failed
    2. ***
    ooooo  : MGT or Periphery power error after successfully startup
    1. ooooo   : PS_Error_Status failed
    2. **oooooo  :
    FMC power up
    1. PS_Error failed
    2. *
    ooooooo : FMC power error after successfully startup
    1. ooooooo  : Done is low-> SoC PL not programmed
    2. LED OFF
    : Power good
    1. or ON : All ready → user defined from FPGA IO
    LED4 (D13
    LED3 (D15
    green)
    Boot Mode
    Power LED. Status depends on blink sequence and priority.
    1. LED ON  :
    JTAG
    1. Power button is pressed
    2. ********    :
    Error unknown state
    1. Main power up failed
    2. *****ooo   :
    not used
    1. Main power error after successfully startup
    2. *****ooo   :
    not used
    1. MGT or Periphery power up failed
    2. ***ooooo  :
    not used
    1. MGT or Periphery power error after successfully startup
    2. **oooooo  :
    QSPI
    1. FMC power up failed
    2. *ooooooo
    : PJTAG_0
    1. : FMC power error after successfully startup
    2. LED OFF :
    SD1
    1. Power good
    LED2 (D14 green
    FPGA XMOD (J24-XMOD2)
    PS Status

    Boot Mode. Status depends on blink sequence and priority.

    1. LED ON  :
    Reset button is pressed
    1. JTAG
    2. ********    :
    Init_B failed
    1. Error unknown state
    2. *****ooo   :
    PS_Error_Status and PS_Error failed
    1. not used
    2. *****ooo   :
    PS_Error_Status failed
    1. not used
    2. ***ooooo  :
    PS_Error failed
    1. not used
    2. **oooooo  :
    Done is low-> SoC PL not programmed
    1. QSPI
    2. *ooooooo :
    not used
    1. PJTAG_0
    2. LED OFF :
    All ready
    1. SD1
    LED1 (D13 green
    CPLD XMOD (J35-XMOD1)
    TODO
    User FPGA IO

     

    Appx. A: Change History and Legal Notices

    ...